Date: Sun, 16 Nov 2014 22:39:10 +0100 From: Kurt Jaeger <lists@opsec.eu> To: freebsd-stable@freebsd.org Subject: aacraid drives missing after update 10.0 -> 10.1 ? Message-ID: <20141116213910.GF44537@home.opsec.eu>
next in thread | raw e-mail | index | archive | help
Hi! Under 10.0, we had: da0 at aacraidp1 bus 0 scbus1 target 0 lun 0 da0: <HGST HUS724020ALE640 MJ6O> Fixed Direct Access SCSI-5 device (offline) da0: Serial Number PK1B31P8H5DD2V da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) da1 at aacraidp1 bus 0 scbus1 target 1 lun 0 da1: <HGST HUS724020ALE640 MJ6O> Fixed Direct Access SCSI-5 device (offline) da1: Serial Number PK1B31P8H5L97P da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) Under 10.1, we have: pass0 at aacraidp1 bus 0 scbus1 target 0 lun 0 pass0: <HGST HUS724020ALE640 MJ6O> Fixed unknown SCSI-5 device (offline) pass0: Serial Number PK1B31P8H5DD2V pass0: 300.000MB/s transfers pass0: Command Queueing enabled pass1 at aacraidp1 bus 0 scbus1 target 1 lun 0 pass1: <HGST HUS724020ALE640 MJ6O> Fixed unknown SCSI-5 device (offline) pass1: Serial Number PK1B31P8H5L97P pass1: 300.000MB/s transfers pass1: Command Queueing enabled The raid controller: Adaptec 6405E aacraid0: <Adaptec RAID Controller> mem 0xf7400000-0xf77fffff,0xf7841000-0xf78417ff,0xf7840000-0xf78400ff irq 17 at device 0.0 on pci2 aacraid0: Enable Raw I/O aacraid0: Enable 64-bit array aacraid0: New comm. interface type1 enabled aacraid0: Adaptec 6405E, aacraid driver 3.2.5-1 aacraidp0 on aacraid0 aacraidp1 on aacraid0 aacraidp2 on aacraid0 aacraidp3 on aacraid0 How do I tell the controller to start those drives and make them visible again ? -- pi@opsec.eu +49 171 3101372 6 years to go !
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141116213910.GF44537>