Date: Fri, 04 Dec 2015 02:47:22 -0800 (PST) From: Anton Shterenlikht <mexas@bris.ac.uk> To: freebsd-questions@freebsd.org Subject: help number disks via /boot/device.hints Message-ID: <201512041047.tB4AlLEq091375@mech-as222.men.bris.ac.uk>
next in thread | raw e-mail | index | archive | help
I've a problem - when the fibre disks are connected at boot, the boot disk is not given da0 and I cannot boot. So what I do now is disconnect the fiber disk until boot is completed, and connect is manually afterwards. Then I get: da0 at mpt0 bus 0 scbus3 target 2 lun 0 da0: <IBM-ESXS MAY2073RC T107> Fixed Direct Access SPC-3 SCSI device da0: Serial Number B399P790FBEG da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C) da1 at isp0 bus 0 scbus2 target 0 lun 5 da1: <COMPAQ MSA1000 VOLUME 4.32> Fixed Direct Access SPC-2 SCSI device da1: Serial Number P56350GX3RX04Z da1: 200.000MB/s transfers WWNN 0x500805f3000ec220 WWPN 0x500805f3000ec221 PortID 0x10000 da1: Command Queueing enabled da1: 140011MB (286744185 512 byte sectors: 255H 63S/T 17849C) How can I set in /boot/device.hints that the MSA1000 disk is da1 and IBM is the boot disk da0? Thanks Anton
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201512041047.tB4AlLEq091375>