Date: Fri, 27 Jan 2017 15:43:03 +0100 From: Matthias Apitz <guru@unixarea.de> To: freebsd-questions@freebsd.org Subject: Dell PowerEdge r210 II Message-ID: <20170127144303.GA2706@c720-r292778-amd64.oa.oclc.org>
next in thread | raw e-mail | index | archive | help
--u3/rZRmxL6MmkK24 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit Hello, The company I'm working for, decided to put some older rack mount servers into dust bin and I'm saving a Dell PowerEdge r210 II with 16 GByte RAM and 8 CPU of 3.3 GHz as my new poudiere oven. The server has no disks (because they must be destroyed). I booted FreeBSD CURRENT amd64 from an USB key and have below the dmsg(1) and ifconfig(8) output, attached below. http://www.dell.com/downloads/global/products/pedge/en/PowerEdge_R210_Tech_Guide.pdf Any comments about this "project" and any ideas about the disks to buy? Thx matthias -- Matthias Apitz, ✉ guru@unixarea.de, ⌂ http://www.unixarea.de/ ☎ +49-176-38902045 --u3/rZRmxL6MmkK24 Content-Type: text/plain; charset=utf-8 Content-Disposition: attachment; filename="dell.dmesg.txt" Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #0 r303344: Wed Jul 27 05:57:18 CEST 2016 guru@c720-r292778-amd64:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0) WARNING: WITNESS option enabled, expect reduced performance. VT(vga): text 80x25 info: [drm] Initialized drm 1.1.0 20060810 CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3292.59-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16557178880 (15790 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL PE_SC3 > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard random: entropy device external interface netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80f32c50, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <DELL PE_SC3> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x10 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 mps0: <Avago Technologies (LSI) SAS2008> port 0x2000-0x20ff mem 0xc5140000-0xc514ffff,0xc5100000-0xc513ffff irq 16 at device 0.0 on pci1 mps0: Firmware: 07.15.08.00, Driver: 21.01.00.00-fbsd mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc5206000-0xc52063ff irq 20 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bce0: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xc0000000-0xc1ffffff irq 16 at device 0.0 on pci2 miibus0: <MII bus> on bce0 brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Using defaults for TSO: 65518/35/2048 bce0: Ethernet address: d4:ae:52:bf:79:cc bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) Coal (RX:6,6,18,18; TX:20,20,80,80) bce1: <QLogic NetXtreme II BCM5716 1000Base-T (C0)> mem 0xc2000000-0xc3ffffff irq 17 at device 0.1 on pci2 miibus1: <MII bus> on bce1 brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Using defaults for TSO: 65518/35/2048 bce1: Ethernet address: d4:ae:52:bf:79:cd bce1: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11) Coal (RX:6,6,18,18; TX:20,20,80,80) ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc5205000-0xc52053ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> mem 0xc4000000-0xc47fffff,0xc5000000-0xc5003fff,0xc4800000-0xc4ffffff irq 19 at device 3.0 on pci3 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0x3048-0x304f,0x3054-0x3057,0x3040-0x3047,0x3050-0x3053,0x3020-0x303f mem 0xc5204000-0xc52047ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xcb7ff,0xcb800-0xcc7ff,0xcc800-0xcd7ff on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 bce0: link state changed to DOWN bce1: link state changed to DOWN usbus0: 480Mbps High Speed USB v2.0 Timecounters tick every 1.000 msec IP Filter: v5.1.2 initialized. Default = pass all, Logging = enabled usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen1.3: <vendor 0x0424> at usbus1 uhub4: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 3> on usbus1 uhub4: MTT enabled uhub4: 4 ports with 4 removable, self powered ugen1.4: <Generic> at usbus1 umass0: <Generic Flash Card ReaderWriter, class 0/0, rev 2.00/1.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4001 umass0:3:0: Attached to scbus3 ugen1.5: <Cherry> at usbus1 ukbd0: <Cherry USB keyboard, class 0/0, rev 2.00/1.03, addr 5> on usbus1 kbd2 at ukbd0 ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device SMP: AP CPU #1 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <Multiple Card Reader 1.00> Removable Direct Access SCSI device da0: Serial Number 058F63666438 da0: 40.000MB/s transfers da0: 15312MB (31358976 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> Timecounter "TSC-low" frequency 1646294128 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [rw,noatime]... GEOM_PART: da0 was automatically resized. Use `gpart commit da0` to save changes or `gpart undo da0` to revert them. GEOM_PART: da0 was automatically resized. Use `gpart commit da0` to save changes or `gpart undo da0` to revert them. GEOM_PART: da0 was automatically resized. Use `gpart commit da0` to save changes or `gpart undo da0` to revert them. GEOM_PART: da0 was automatically resized. Use `gpart commit da0` to save changes or `gpart undo da0` to revert them. GEOM_PART: da0 was automatically resized. Use `gpart commit da0` to save changes or `gpart undo da0` to revert them. uhid0: <Cherry USB keyboard, class 0/0, rev 2.00/1.03, addr 5> on usbus1 ifconfig -a bce0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE> ether d4:ae:52:bf:79:cc nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect bce1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c01bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE> ether d4:ae:52:bf:79:cd nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo FreeBSD r303343-amd64 12.0-CURRENT FreeBSD 12.0-CURRENT #0 r303344: Wed Jul 27 05:57:18 CEST 2016 guru@c720-r292778-amd64:/usr/obj/usr/src/sys/GENERIC amd64 --u3/rZRmxL6MmkK24--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20170127144303.GA2706>