Date: Sat, 19 Jan 2019 10:52:42 +0100 From: Kurt Jaeger <pi@freebsd.org> To: Warner Losh <imp@bsdimp.com> Cc: FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: Multiport serial card Exsys EX-44388, where are the devices ? Message-ID: <20190119095242.GA77943@home.opsec.eu> In-Reply-To: <CANCZdfpwf6zazhxevz=mCn6pVmm3DMQPO3gJ-G-iR-9eb68d=w@mail.gmail.com> References: <20190118215210.GC54920@home.opsec.eu> <CANCZdfpwf6zazhxevz=mCn6pVmm3DMQPO3gJ-G-iR-9eb68d=w@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi!
> uart is the new thing. sio info should be ignored.
>
> Chances are good that this device doesn't have the proper entries in the
> puc driver. Do you have any pci devices that show up as unclaimed?
In a different box, I got this:
none1@pci0:7:4:0: class=0x070002 card=0x000814a1 chip=0x000814a1 rev=0xb0 hdr=0x00
vendor = 'Systembase Co Ltd'
class = simple comms
subclass = UART
bar [10] = type I/O Port, range 32, base 0x1040, size 64, enabled
bar [14] = type I/O Port, range 32, base 0x1000, size 64, enabled
and:
pcib7@pci0:6:0:0: class=0x060400 card=0x00000000 chip=0x10801b21 rev=0x04 hdr=0x01
vendor = 'ASMedia Technology Inc.'
device = 'ASM1083/1085 PCIe to PCI Bridge'
class = bridge
subclass = PCI-PCI
The chips on the card are:
ASMedia asm1083 b0bk4911b3 1543 (?)
SystemBase SB16C1058PCI 1624
It only detects four (or six?) serials...
So I think I found a 'somehow' working setup and have to add stuff to
sys/dev/puc/pucdata.c to match it. Thanks for the pointer!
--
pi@opsec.eu +49 171 3101372 One year to go !
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190119095242.GA77943>