Date: Sat, 25 May 2019 12:21:58 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: qroxana <qroxana@mail.ru> Cc: qroxana via freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: BPI M1 hangs at mounting root filesystem from SATA disk since r345948 Message-ID: <20190525122158.cdc7c68fa30a6e02c70b0de4@bidouilliste.com> In-Reply-To: <E1hU7Us-0007sD-Ry.qroxana-mail-ru@smtp41.i.mail.ru> References: <E1hU7Us-0007sD-Ry.qroxana-mail-ru@smtp41.i.mail.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 24 May 2019 10:32:11 +0000 qroxana via freebsd-arm <freebsd-arm@freebsd.org> wrote: > > Here's the boot message of r345948: > > ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 76319MB (156301488 512 byte sectors) > GEOM: new disk ada0 > mmc0: Card at relative address 0x1234 added: > mmc0: card: SDHC SA08G 2.1 SN 44E37D57 MFG 11/2015 by 2 TM > mmc0: quirks: 0 > mmc0: bus: 4bit, 50MHz (high speed timing) > mmc0: memory: 15196160 blocks, erase sector 8192 blocks > mmc0: setting transfer rate to 50.000MHz (high speed timing) > mmcsd0: 8GB <SDHC SA08G 2.1 SN 44E37D57 MFG 11/2015 by 2 TM> at mmc0 50.0MHz/4bit/32768-block > Release APs > CPU(1) applied BP hardening: not necessary > arc4random: no preloaded entropy cache > regulator: shutting down vcc3v0 > Trying to mount root from ufs:/dev/label/root [rw]... > regulator: shutting down vcc3v3 > regulator: shutting down vcc5v0 > regulator: shutting down ldo3 > > r345947 boots fine. That doesn't make much sense to me ... Could you post the full boot -v somewhere ? Also could you try to boot with hw.regulator.disable_unused=0 in loader.conf ? Thanks, -- Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190525122158.cdc7c68fa30a6e02c70b0de4>