Date: Fri, 16 Aug 2019 15:24:54 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: =?ISO-8859-1?Q?S=F8ren?= Schmidt <soren.schmidt@gmail.com> Cc: Mit Matelske <mit@pt.net>, freebsd-arm <freebsd-arm@freebsd.org>, Marcin Wojtas <mw@semihalf.com> Subject: Re: Espressobin anyone ? Message-ID: <20190816152454.4e54ab5c276a543c120d909a@bidouilliste.com> In-Reply-To: <78F5029D-A0F5-42F2-8191-07EB3A68C87B@gmail.com> References: <E73AFF5D-43CA-41A7-BDBA-ADEF2D342479@deepcore.dk> <45CD194B-8533-42B7-9FE8-B2C8C03F4422@gmail.com> <1021311926.304550.1565731831094.JavaMail.zimbra@perftech.com> <4AE7C7A2-0BFB-4093-AE19-6AAC8F44FF25@gmail.com> <917479365.631712.1565792953255.JavaMail.zimbra@perftech.com> <CAPv3WKeCRWy65LPeeJiisPtaz=LePpVYLDAi2cj%2B2TQR=r09YA@mail.gmail.com> <1547777156.662147.1565798461515.JavaMail.zimbra@perftech.com> <0E42E605-477E-4E65-810E-BD3A8CDE2C80@gmail.com> <973015183.1067498.1565890674099.JavaMail.zimbra@perftech.com> <BD3710D7-EB87-4BD0-9CDE-E55B9412ED87@gmail.com> <20190815210311.1035f64b003e2bc85fa47ca8@bidouilliste.com> <B3AFA483-4BE4-4BC6-BCC1-4BD58A8E554C@gmail.com> <20190815233755.893e485f40ccacd79cdb3d96@bidouilliste.com> <78F5029D-A0F5-42F2-8191-07EB3A68C87B@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 16 Aug 2019 07:28:59 +0200
S=F8ren Schmidt <soren.schmidt@gmail.com> wrote:
> Hi
>=20
> Very simple, reverting sys/gnu/dts to what was before 350595 (actually 35=
0592).
> Thats what we have svn for ?
If I asked how it was to have the svn command that you used, I want to
make sure that you didn't revert anything else, like do you have
r350596 and r350628 ?
> That does make my bananapi work again, no other changes just a recompiled=
kernel.
That + copying the dtb to the fat32 partition ?
Can you post the dtb somewhere.
> However it does not bring the Espressobin back to life, thats something i=
n one of the ~30 other files that changed between those two revisions.
What Linux version of DTS are you using then ? The ones that were in
stable/12 when it was branched (4.18) or a later revision ?
> -S=F8ren
>=20
> > On 15 Aug 2019, at 23.37, Emmanuel Vadot <manu@bidouilliste.com> wrote:
> >=20
> > On Thu, 15 Aug 2019 21:56:23 +0200
> > S=F8ren Schmidt <soren.schmidt@gmail.com> wrote:
> >=20
> >>=20
> >> Well, I don?t care where you are from and what color you have :)
> >>=20
> >> Now, if I update my stable12 sources to r350595 the bananapi breaks, i=
f revert sys/gnu/dts it works again, go figure..
> >=20
> > Reverting to what ? and how ?
> >=20
> > Because I've just test 12-stable and I have the problem that I've said
> > in my previous mail so setting hw.regulator.disable_unused=3D0 is the
> > work around.
> > The problem is in twsi not in the DTS so I'm curious how reverting
> > only the dts fixes this problem.
> >=20
> >> The r351099 fix is already like that in -stable, and not part of the p=
roblem.
> >>=20
> >> -S=F8ren
> >=20
> >>> On 15 Aug 2019, at 21.03, Emmanuel Vadot <manu@bidouilliste.com> wrot=
e:
> >>>=20
> >>> On Thu, 15 Aug 2019 19:48:54 +0200
> >>> S=F8ren Schmidt <soren.schmidt@gmail.com> wrote:
> >>>=20
> >>>> Hi Mit!
> >>>>=20
> >>>> Right, I suspected that, 12-stable broke many embedded systems betwe=
en r350592 and r350595 where all the latest and greatest DTS files was pull=
ed in, I guess the same holds for -current.
> >>>>=20
> >>>> -S=F8ren
> >>>=20
> >>> Mhm it's fun that you think that DTS import is the source of all your
> >>> problems, I get it, it's easy to blame the French guy that bulk import
> >>> the DTS, he surely don't know what he is doing.
> >>> Anyway, two problems were raised in this thread :
> >>>=20
> >>> 1) BananaPi (A20) doesn't boot
> >>> 2) Espressobin sd support is broken
> >>>=20
> >>> I've just looked at the BananaPi problem today, I've fixed a first
> >>> problem in r351099.
> >>> The main problem is that when we disable the unused regulators we hang
> >>> when trying to disabling ldo3. It's weird because the board doesn't u=
se
> >>> LDO3 (which is why we are disabling it, it's unused). The problem is =
in
> >>> twsi I think as only leaving the part in axp209 that read the
> >>> voltage register value make FreeBSD hang.
> >>> I'll have a proper look later, in the meantime you can set
> >>> hw.regulator.disable_unused=3D0
> >>> in /boot/loader.conf
> >>> This isn't a DTS problem.
> >>>=20
> >>> For Espressobin I haven't found any thing related to SD in the DTS
> >>> updates since the import, the only things slighly related are mmc and
> >>> sdio.
> >>> So if someone could find which DTS import broke this I can have a loo=
k.
> >>>=20
> >>>>=20
> >>>>> On 15 Aug 2019, at 19.37, Mit Matelske <mit@pt.net> wrote:
> >>>>>=20
> >>>>> Yeah, that was the problem. I went back to r348882 and everything =
worked out of the box.
> >>>>>=20
> >>>>> Thanks again for the hand holding!
> >>>>>=20
> >>>>> Mit
> >>>>>=20
> >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:soren.schm=
idt@gmail.com>>
> >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> >>>>> Cc: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>>, "fr=
eebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> >>>>> Sent: Wednesday, August 14, 2019 1:33:04 PM
> >>>>> Subject: Re: Espressobin anyone ?
> >>>>>=20
> >>>>>=20
> >>>>> It might simply be broken in -current (again).
> >>>>>=20
> >>>>> I just updated my stable12 tree and I pulled in new .dts files for =
just about anything?
> >>>>>=20
> >>>>> Needless to say, it broke the Espressobin?s SD support, it now fail=
s just like yours..
> >>>>>=20
> >>>>> It also broke allwinner builds and what not, so I?m just going back=
in time again :)
> >>>>>=20
> >>>>> I wonder why there is this overwhelming need to import stuff that b=
reaks things right, left and center in a -stable branch ?
> >>>>> That would have earned you the pointy hat back when?.
> >>>>>=20
> >>>>> -S=F8ren
> >>>>>=20
> >>>>>=20
> >>>>> On 14 Aug 2019, at 18.01, Mit Matelske <mit@pt.net <mailto:mit@pt.n=
et>> wrote:
> >>>>>=20
> >>>>> Marcin-
> >>>>>=20
> >>>>> Sorry I didn't reply yesterday. I didn't have any luck with that e=
ither. I tried a lot of permutations.
> >>>>>=20
> >>>>> Not saying for 100% it doesn't work, but I couldn't get it to work!
> >>>>>=20
> >>>>> Mit
> >>>>>=20
> >>>>> From: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>>
> >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> >>>>> Cc: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:soren.schmid=
t@gmail.com>>, "freebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@f=
reebsd.org>>
> >>>>> Sent: Wednesday, August 14, 2019 10:41:04 AM
> >>>>> Subject: Re: Espressobin anyone ?
> >>>>>=20
> >>>>> Hi Mit,
> >>>>> Since you are using the latest 13-current, could you please try if =
passing rootdev via u-boot bootargs (please see my previous email) works fo=
r you without the loader modification?
> >>>>>=20
> >>>>> Best regards,
> >>>>> Marcin
> >>>>>=20
> >>>>> ?r., 14 sie 2019 o 16:29 Mit Matelske <mit@pt.net <mailto:mit@pt.ne=
t>> napisa?(a):
> >>>>> Soren-
> >>>>>=20
> >>>>> Thanks for the info. I'll grab a couple more SD cards at lunch. T=
his one is a new Samsung 32GB. I'll also try putting the changes into 12 a=
nd see if that helps. I'm using the latest 13-current.
> >>>>>=20
> >>>>> Again, appreciate the hand holding!
> >>>>>=20
> >>>>> Mit
> >>>>>=20
> >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:soren.schm=
idt@gmail.com>>
> >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> >>>>> Cc: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>>, "fr=
eebsd-arm" <freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> >>>>> Sent: Wednesday, August 14, 2019 2:30:31 AM
> >>>>> Subject: Re: Espressobin anyone ?
> >>>>>=20
> >>>>> Hi Mit
> >>>>> Hmm, from your earlier posted dmesgs it looks like the SD card is n=
ot getting detected properly..
> >>>>>=20
> >>>>> I get this output:
> >>>>>=20
> >>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0=
x1e808-0x1e80b irq 24 on simplebus1
> >>>>> mmc0: <MMC/SD bus> on sdhci_xenon0
> >>>>> ?snip?
> >>>>> mmcsd0: 16GB <SDHC SD16G 3.0 SN 01E28E67 MFG 07/2017 by 39 PH> at m=
mc0 50.0MHz/4bit/65535-block
> >>>>>=20
> >>>>> The problem you see was fixed for me by r348882, maybe it got broke=
n later, I havn?t backported the later changes..
> >>>>>=20
> >>>>> Have you tried another SD card ? I have found 2 of mine that the es=
pressobin doesn?t like, but works fine with bananapi and friends...
> >>>>>=20
> >>>>> -S=F8ren
> >>>>>=20
> >>>>> On 13 Aug 2019, at 23.30, Mit Matelske <mit@pt.net <mailto:mit@pt.n=
et>> wrote:
> >>>>>=20
> >>>>> Soren-
> >>>>>=20
> >>>>> Thanks for the code snippet! That will fix one of the problems.
> >>>>>=20
> >>>>> I still can't mount my filesystem, though. I think I'm doing somet=
hing really simple, wrong. I believe I'm running the latest code and added=
some printfs to show the kernel setting the regulator:
> >>>>>=20
> >>>>>=20
> >>>>> usbus1 on ehci0
> >>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> >>>>> sdhci_xenon0: regulator_get_by_ofw_property(vqmmc-supply) =3D 19
> >>>>> sdhci_xenon0: vqmmc-supply regulator found
> >>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem 0xd0000-0xd02ff,0=
x1e808-0x1e80b irq 24 on simplebus1
> >>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simpleb=
us1
> >>>>>=20
> >>>>>=20
> >>>>> Could there be a problem with how I am setting up my filesystem? I=
've tried both freebsd-ufs and freebsd as the type, with no luck. A gpart l=
isting of my SD card:
> >>>>>=20
> >>>>> root@fbl:~ # gpart list da3
> >>>>> Geom name: da3
> >>>>> modified: false
> >>>>> state: OK
> >>>>> fwheads: 255
> >>>>> fwsectors: 63
> >>>>> last: 62521335
> >>>>> first: 3
> >>>>> entries: 4
> >>>>> scheme: GPT
> >>>>> Providers:
> >>>>> 1. Name: da3p1
> >>>>> Mediasize: 41943040 (40M)
> >>>>> Sectorsize: 512
> >>>>> Stripesize: 0
> >>>>> Stripeoffset: 1536
> >>>>> Mode: r0w0e0
> >>>>> efimedia: HD(1,GPT,19894dc5-b8b2-11e9-871f-08008a0010e0,0x3,0x1400=
0)
> >>>>> rawuuid: 19894dc5-b8b2-11e9-871f-08008a0010e0
> >>>>> rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b
> >>>>> label: (null)
> >>>>> length: 41943040
> >>>>> offset: 1536
> >>>>> type: efi
> >>>>> index: 1
> >>>>> end: 81922
> >>>>> start: 3
> >>>>> 2. Name: da3p2
> >>>>> Mediasize: 31968979456 (30G)
> >>>>> Sectorsize: 512
> >>>>> Stripesize: 0
> >>>>> Stripeoffset: 41944576
> >>>>> Mode: r0w0e0
> >>>>> efimedia: HD(2,GPT,98786462-be30-11e9-ae6e-08008a0010e0,0x14003,0x=
3b8bff5)
> >>>>> rawuuid: 98786462-be30-11e9-ae6e-08008a0010e0
> >>>>> rawtype: 516e7cb6-6ecf-11d6-8ff8-00022d09712b
> >>>>> label: (null)
> >>>>> length: 31968979456
> >>>>> offset: 41944576
> >>>>> type: freebsd-ufs
> >>>>> index: 2
> >>>>> end: 62521335
> >>>>> start: 81923
> >>>>> Consumers:
> >>>>> 1. Name: da3
> >>>>> Mediasize: 32010928128 (30G)
> >>>>> Sectorsize: 512
> >>>>> Mode: r0w0e0
> >>>>>=20
> >>>>> Thanks!!
> >>>>>=20
> >>>>> Mit
> >>>>>=20
> >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:soren.schm=
idt@gmail.com>>
> >>>>> To: "Marcin Wojtas" <mw@semihalf.com <mailto:mw@semihalf.com>>
> >>>>> Cc: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>, "freebsd-arm" =
<freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> >>>>> Sent: Tuesday, August 13, 2019 12:55:09 PM
> >>>>> Subject: Re: Espressobin anyone ?
> >>>>>=20
> >>>>> Hi
> >>>>> That doesn?t seen to work on the espressobin, or least I can?t get =
it to pick it up.
> >>>>>=20
> >>>>> I use this patch as a workaround:
> >>>>>=20
> >>>>> Index: main.c
> >>>>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> >>>>> --- main.c (revision 350496)
> >>>>> +++ main.c (working copy)
> >>>>> @@ -463,6 +462,13 @@
> >>>>> int rv;
> >>>>> char *rootdev;
> >>>>>=20
> >>>>> +#if defined(__aarch64__)
> >>>>> + /* SOS HACK in rootdev, at least Espressobin gets this wrong */
> >>>>> + printf("Setting currdev hack\n");
> >>>>> + set_currdev("disk0p2");
> >>>>> + return (0);
> >>>>> +#endif
> >>>>> +
> >>>>> /*
> >>>>> * First choice: if rootdev is already set, use that, even if
> >>>>> * it's wrong.
> >>>>>=20
> >>>>> Its not pretty but it does the job until I get time to look into wh=
y bootargs aren?t passed / won?t stick, probably something I havn?t backpor=
ted to my -stable12 sources yet...
> >>>>>=20
> >>>>> -S=F8ren
> >>>>>=20
> >>>>> On 13 Aug 2019, at 01.38, Marcin Wojtas <mw@semihalf.com <mailto:mw=
@semihalf.com>> wrote:
> >>>>>=20
> >>>>> Hi,
> >>>>>=20
> >>>>> Not sure if it's what you are looking for, but in order to autoboot=
, I
> >>>>> simply pass 'rootdev=3DdiskXpY' in the bootargs variable. Here's ex=
ample from
> >>>>> A3720-DB (same should work on EspressoBin):
> >>>>>=20
> >>>>> Marvell>> set bootargs "rootdev=3Ddisk1p1";usb reset; fatload usb 0=
:1
> >>>>> ${fdt_addr} armada-3720-db.dtb; fatload usb 0:1 ${kernel_addr}
> >>>>> boot/loader.efi; bootefi ${kernel_addr} ${fdt_addr}
> >>>>> resetting USB...
> >>>>> USB0: Register 2000104 NbrPorts 2
> >>>>> Starting the controller
> >>>>> USB XHCI 1.00
> >>>>> USB1: USB EHCI 1.00
> >>>>> - ______ ____ _____ _____
> >>>>> | ____| | _ \ / ____| __ \
> >>>>> | |___ _ __ ___ ___ | |_) | (___ | | | |
> >>>>> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> >>>>> | | | | | __/ __/| |_) |____) | |__| |
> >>>>> | | | | | | || | | |
> >>>>> |_| |_| \___|\___||____/|_____/|_____/
> >>>>> ```
> >>>>> `
> >>>>> ????????????Welcome to FreeBSD????????????? s` `.....---.......-=
-.```
> >>>>> -/
> >>>>> ? ? +o .--` /y=
:`
> >>>>> +.
> >>>>> ? 1. Boot Multi user [Enter] ? yo`:. :o
> >>>>> `+-
> >>>>> ? 2. Boot Single user ? y/ -=
/` -o/
> >>>>> ? 3. Escape to loader prompt ? .-
> >>>>> ::/sy+:.
> >>>>> ? 4. Reboot ? / =
`--
> >>>>> /
> >>>>> ? ? `:
> >>>>> :`
> >>>>> ? Options: ? `:
> >>>>> :`
> >>>>> ? 5. Kernel: default/kernel (1 of 1) ? /
> >>>>> /
> >>>>> ? 6. Boot Options ? .-
> >>>>> -.
> >>>>> ? ? -- =
-.
> >>>>> ? ? `:` =
`:`
> >>>>> ? ? .-- =
`--.
> >>>>> ??????????????????????????????????????????? .---.....---=
-.
> >>>>> Autoboot in 9 seconds, hit [Enter] to boot or any other key to stop
> >>>>>=20
> >>>>> Loading kernel...
> >>>>> /boot/kernel/kernel text=3D0x95047c data=3D0x1919d0+0x84aa94
> >>>>> syms=3D[0x8+0x13aaa8+0x8+0x12610d]
> >>>>> Loading configured modules...
> >>>>> can't find '/boot/entropy'
> >>>>> Using DTB provided by EFI at 0x8000000.
> >>>>> ---<<BOOT>>---
> >>>>> KDB: debugger backends: ddb
> >>>>> KDB: current backend: ddb
> >>>>> Copyright (c) 1992-2019 The FreeBSD Project.
> >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,=
1994
> >>>>> The Regents of the University of California. All rights reserved.
> >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >>>>> FreeBSD 13.0-CURRENT 17a1fc80d57-c261519(upstream_master) GENERIC a=
rm64
> >>>>> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based =
on LLVM
> >>>>> 8.0.0)
> >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> >>>>> VT: init without driver.
> >>>>> Starting CPU 1 (1)
> >>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >>>>> [...]
> >>>>>=20
> >>>>> Best regards,
> >>>>> Marcin
> >>>>>=20
> >>>>> pon., 12 sie 2019 o 23:14 Mit Matelske <mit@pt.net <mailto:mit@pt.n=
et>> napisa?(a):
> >>>>>=20
> >>>>>=20
> >>>>> Soren-
> >>>>>=20
> >>>>> Thanks for the quick response. I built this kernel with revision 3=
50924.
> >>>>> I'll dig into whats going on in the morning.
> >>>>>=20
> >>>>> Mind posting your diff for your loader.efi?
> >>>>>=20
> >>>>> Thanks again!
> >>>>>=20
> >>>>> Mit
> >>>>>=20
> >>>>>=20
> >>>>> ----- Original Message -----
> >>>>> From: "S=F8ren Schmidt" <soren.schmidt@gmail.com <mailto:soren.schm=
idt@gmail.com>>
> >>>>> To: "Mit Matelske" <mit@pt.net <mailto:mit@pt.net>>
> >>>>> Cc: "tscho" <johannes@t-beutel.com <mailto:johannes@t-beutel.com>>,=
"freebsd-arm" <
> >>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org>>
> >>>>> Sent: Monday, August 12, 2019 3:49:48 PM
> >>>>> Subject: Re: Espressobin anyone ?
> >>>>>=20
> >>>>> Hi
> >>>>>=20
> >>>>> Looks like your sources may be too old, you need to be at least at =
r348882
> >>>>> to get the fix for the SD card VCC regulator.
> >>>>>=20
> >>>>> That change fixed it for me backported to 12-stable...
> >>>>>=20
> >>>>> The currdev problem still exists, I have it hardwired in my loader =
for
> >>>>> aarch64 :)
> >>>>>=20
> >>>>> -S=F8ren
> >>>>>=20
> >>>>>=20
> >>>>> On 12 Aug 2019, at 21.06, Mit Matelske <mit@pt.net <mailto:mit@pt.n=
et>> wrote:
> >>>>>=20
> >>>>> I'm having a couple little hiccups booting this board also. One has
> >>>>> been commented on already, that I can't get the loader to automatic=
ally
> >>>>> start loading the kernel on "disk0p2"...
> >>>>>=20
> >>>>> The second, is that the kernel can't find the SD card after booting=
so
> >>>>> it can't mount the root filesystem. I'm using the dts/dtb and kern=
el from
> >>>>> the 13-current branch.
> >>>>>=20
> >>>>> Thanks for any and all help. I haven't used u-boot in about decade.
> >>>>> Spoiled by the x86 platform.
> >>>>>=20
> >>>>> Mit Matelske
> >>>>>=20
> >>>>>=20
> >>>>> ***U-boot environment:***
> >>>>>=20
> >>>>>=20
> >>>>> Marvell>> printenv
> >>>>> baudrate=3D115200
> >>>>> bootargs=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000
> >>>>> root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 biosdevname=3D0
> >>>>> bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatlo=
ad mmc
> >>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> >>>>> bootdelay=3D2
> >>>>> bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatlo=
ad mmc
> >>>>> 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> >>>>> console=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000
> >>>>> eth1addr=3D00:51:82:11:22:01
> >>>>> eth2addr=3D00:51:82:11:22:02
> >>>>> eth3addr=3D00:51:82:11:22:03
> >>>>> ethact=3Dneta@30000
> >>>>> ethaddr=3DF0:AD:4E:09:6B:8F
> >>>>> ethprime=3Deth0
> >>>>> fdt_addr=3D0x4f00000
> >>>>> fdt_high=3D0xffffffffffffffff
> >>>>> fdt_name=3Defi/boot/armada-3720-espressobin.dtb
> >>>>> fdtcontroladdr=3D3f7161b8
> >>>>> gatewayip=3D10.4.50.254
> >>>>> get_images=3Dtftpboot $kernel_addr $image_name; tftpboot $fdt_addr
> >>>>> $fdt_name; run get_ramfs
> >>>>> get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv ramfs_addr
> >>>>> 0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr=
-;fi
> >>>>> hostname=3Dmarvell
> >>>>> image_name=3Defi/freebsd/loader.efi
> >>>>> initrd_addr=3D0xa00000
> >>>>> initrd_size=3D0x2000000
> >>>>> ipaddr=3D0.0.0.0
> >>>>> kernel_addr=3D0x5000000
> >>>>> loadaddr=3D0x5000000
> >>>>> netdev=3Deth0
> >>>>> netmask=3D255.255.255.0
> >>>>> ramfs_addr=3D0x8000000
> >>>>> ramfs_name=3D-
> >>>>> root=3Droot=3D/dev/nfs rw
> >>>>> rootpath=3D/srv/nfs/
> >>>>> serverip=3D0.0.0.0
> >>>>> set_bootargs=3Dsetenv bootargs $console $root
> >>>>> ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none
> >>>>> nfsroot=3D$serverip:$rootpath $extra_params
> >>>>> stderr=3Dserial@12000
> >>>>> stdin=3Dserial@12000
> >>>>> stdout=3Dserial@12000
> >>>>>=20
> >>>>>=20
> >>>>> ***Full boot logs:***
> >>>>>=20
> >>>>>=20
> >>>>> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +080=
0)
> >>>>>=20
> >>>>> Model: Marvell Armada 3720 Community Board ESPRESSOBin
> >>>>> CPU @ 1000 [MHz]
> >>>>> L2 @ 800 [MHz]
> >>>>> TClock @ 200 [MHz]
> >>>>> DDR @ 800 [MHz]
> >>>>> DRAM: 1 GiB
> >>>>> U-Boot DT blob at : 000000003f7161b8
> >>>>> Comphy-0: USB3 5 Gbps
> >>>>> Comphy-1: PEX0 2.5 Gbps
> >>>>> Comphy-2: SATA0 6 Gbps
> >>>>> SATA link 0 timeout.
> >>>>> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> >>>>> flags: ncq led only pmp fbss pio slum part sxs
> >>>>> PCIE-0: Link down
> >>>>> MMC: sdhci@d0000: 0, sdhci@d8000: 1
> >>>>> SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB,
> >>>>> total 4 MiB
> >>>>> Net: eth0: neta@30000 [PRIME]
> >>>>> Hit any key to stop autoboot: 0
> >>>>> switch to partitions #0, OK
> >>>>> mmc0 is current device
> >>>>> reading efi/freebsd/loader.efi
> >>>>> 603872 bytes read in 49 ms (11.8 MiB/s)
> >>>>> reading efi/boot/armada-3720-espressobin.dtb
> >>>>> 15946 bytes read in 17 ms (916 KiB/s)
> >>>>> ## Starting EFI application at 05000000 ...
> >>>>> Scanning disk sdhci@d0000.blk <mailto:sdhci@d0000.blk>...
> >>>>> Card did not respond to voltage select!
> >>>>> mmc_init: -95, time 50
> >>>>> Found 1 disks
> >>>>> Consoles: EFI console
> >>>>> FreeBSD/arm64 EFI loader, Revision 1.1
> >>>>>=20
> >>>>> Command line arguments: loader.efi
> >>>>> EFI version: 2.05
> >>>>> EFI Firmware: Das U-boot (rev 0.00)
> >>>>> Console: efi (0)
> >>>>> Failed to find bootable partition
> >>>>> Startup error in /boot/lua/loader.lua: seconds
> >>>>> LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
> >>>>>=20
> >>>>> can't load 'kernel'
> >>>>>=20
> >>>>> Type '?' for a list of commands, 'help' for more detailed help.
> >>>>> OK
> >>>>> OK set currdev=3Ddisk0p2
> >>>>> OK boot
> >>>>>=20
> >>>>> /boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae94
> >>>>> syms=3D[0x8+0x137dd8+0x8+0x126260]
> >>>>> Using DTB provided by EFI at 0x8000000.
> >>>>> ---<<BOOT>>---
> >>>>> KDB: debugger backends: ddb
> >>>>> KDB: current backend: ddb
> >>>>> Copyright (c) 1992-2019 The FreeBSD Project.
> >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,=
1994
> >>>>> The Regents of the University of California. All rights reserve=
d.
> >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> >>>>> FreeBSD 13.0-CURRENT GENERIC arm64
> >>>>> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based =
on
> >>>>> LLVM 6.0.1)
> >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> >>>>> VT: init without driver.
> >>>>> Starting CPU 1 (1)
> >>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >>>>> arc4random: WARNING: initial seeding bypassed the cryptographic ran=
dom
> >>>>> device because it was not yet seeded and the knob 'bypass_before_se=
eding'
> >>>>> was enabled.
> >>>>> random: entropy device external interface
> >>>>> MAP 3e681000 mode 2 pages 1
> >>>>> MAP 3ffa6000 mode 2 pages 1
> >>>>> kbd0 at kbdmux0
> >>>>> ofwbus0: <Open Firmware Device Tree>
> >>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0
> >>>>> simplebus1: <Flattened device tree simple bus> on simplebus0
> >>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem
> >>>>> 0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
> >>>>> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem
> >>>>> 0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
> >>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> >>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem
> >>>>> 0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d900=
00-0x1d91fff,0x1da0000-0x1dbffff
> >>>>> irq 27 on simplebus1
> >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,3=
8,39 on
> >>>>> simple_mfd0
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>>>> gpioregulator0: cannot get pin 0
> >>>>> gpioregulator0: cannot parse parameters
> >>>>> device_attach: gpioregulator0 attach returned 6
> >>>>> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> >>>>> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality =
1000
> >>>>> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1=
000
> >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,3=
8,39 on
> >>>>> simple_mfd0
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>>>> gpioregulator0: cannot get pin 0
> >>>>> gpioregulator0: cannot parse parameters
> >>>>> device_attach: gpioregulator0 attach returned 6
> >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,3=
8,39 on
> >>>>> simple_mfd0
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>>>> gpioregulator0: cannot get pin 0
> >>>>> gpioregulator0: cannot parse parameters
> >>>>> device_attach: gpioregulator0 attach returned 6
> >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,3=
8,39 on
> >>>>> simple_mfd0
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>>>> gpioregulator0: cannot get pin 0
> >>>>> gpioregulator0: cannot parse parameters
> >>>>> device_attach: gpioregulator0 attach returned 6
> >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,3=
8,39 on
> >>>>> simple_mfd0
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>>>> gpioregulator0: cannot get pin 0
> >>>>> gpioregulator0: cannot parse parameters
> >>>>> device_attach: gpioregulator0 attach returned 6
> >>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0
> >>>>> cpu0: <Open Firmware CPU> on cpulist0
> >>>>> cpu1: <Open Firmware CPU> on cpulist0
> >>>>> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
> >>>>> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
> >>>>> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
> >>>>> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on
> >>>>> simplebus1
> >>>>> uart0: console (115200,n,8,1)
> >>>>> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem
> >>>>> 0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,3=
8,39 on
> >>>>> simple_mfd0
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
> >>>>> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem
> >>>>> 0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> >>>>> gpio0: cannot allocate memory window
> >>>>> device_attach: gpio0 attach returned 6
> >>>>> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
> >>>>> mvneta0: version is 10
> >>>>> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
> >>>>> mdio0: <MDIO> on mvneta0
> >>>>> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
> >>>>> e6000sw0: <Marvell 88E6341> on mdio0
> >>>>> e6000sw0: multi-chip addressing mode (0x1)
> >>>>> e6000sw0: CPU port at 0
> >>>>> e6000sw0: fixed port at 0
> >>>>> e6000sw0: PHY at port 1
> >>>>> miibus0: <MII bus> on e6000sw0
> >>>>> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
> >>>>> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> >>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, a=
uto
> >>>>> e6000sw0: PHY at port 2
> >>>>> miibus1: <MII bus> on e6000sw0
> >>>>> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
> >>>>> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> >>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, a=
uto
> >>>>> e6000sw0: PHY at port 3
> >>>>> miibus2: <MII bus> on e6000sw0
> >>>>> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
> >>>>> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> >>>>> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, a=
uto
> >>>>> e6000sw0: switch is ready.
> >>>>> etherswitch0: <Switch controller> on e6000sw0
> >>>>> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on
> >>>>> simplebus1
> >>>>> xhci0: 32 bytes context size, 32-bit DMA
> >>>>> usbus0 on xhci0
> >>>>> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
> >>>>> ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff =
irq
> >>>>> 17 on simplebus1
> >>>>> usbus1: EHCI version 1.0
> >>>>> usbus1 on ehci0
> >>>>> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> >>>>> sdhci_xenon0: <Armada Xenon SDHCI controller> mem
> >>>>> 0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> >>>>> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simpleb=
us1
> >>>>> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported wit=
h FBS
> >>>>> ahcich0: <AHCI channel> at channel 0 on ahci0
> >>>>> device_attach: ahcich0 attach returned 6
> >>>>> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> >>>>> gpioregulator0: cannot get pin 0
> >>>>> gpioregulator0: cannot parse parameters
> >>>>> device_attach: gpioregulator0 attach returned 6
> >>>>> cryptosoft0: <software crypto>
> >>>>> Timecounters tick every 1.000 msec
> >>>>> mvneta0: link state changed to UP
> >>>>> e6000sw0port1: link state changed to DOWN
> >>>>> e6000sw0port2: link state changed to DOWN
> >>>>> e6000sw0port3: link state changed to DOWN
> >>>>> usbus0: 5.0Gbps Super Speed USB v3.0
> >>>>> usbus1: 480Mbps High Speed USB v2.0
> >>>>> Release APs...done
> >>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
> >>>>> Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
> >>>>> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]=
...
> >>>>> Instruction Set Attributes 1 =3D <>
> >>>>> Root mount waiting for: Processor Features 0 =3D
> >>>>> <GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> >>>>> usbus1 Processor Features 1 =3D <0>
> >>>>> usbus0 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS
> >>>>> Mem,MixedEndian,16bit ASID,1TB PA>
> >>>>>=20
> >>>>> Memory Model Features 1 =3D <>
> >>>>> Memory Model Features 2 =3D <32b CCIDX,48b VA>
> >>>>> Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoints,6
> >>>>> Breakpoints,PMUv3,Debug v8>
> >>>>> Debug Features 1 =3D <0>
> >>>>> Auxiliary Features 0 =3D <0>
> >>>>> Auxiliary Features 1 =3D <0>
> >>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> >>>>> WARNING: WITNESS option enabled, expect reduced performance.
> >>>>> ugen0.1: <Generic XHCI root HUB> at usbus0
> >>>>> ugen1.1: <Marvell EHCI root HUB> at usbus1
> >>>>> uhub0 on usbus0
> >>>>> uhub1 on usbus1
> >>>>> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
> >>>>> usbus0
> >>>>> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
> >>>>> usbus1
> >>>>> uhub0: 2 ports with 2 removable, self powered
> >>>>> uhub1: 1 port with 1 removable, self powered
> >>>>> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
> >>>>> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
> >>>>>=20
> >>>>> Loader variables:
> >>>>> vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install
> >>>>> vfs.root.mountfrom.options=3Dro,noatime
> >>>>>=20
> >>>>> Manual root filesystem specification:
> >>>>> <fstype>:<device> [options]
> >>>>> Mount <device> using filesystem <fstype>
> >>>>> and with the specified (optional) option list.
> >>>>>=20
> >>>>> eg. ufs:/dev/da0s1a
> >>>>> zfs:zroot/ROOT/default
> >>>>> cd9660:/dev/cd0 ro
> >>>>> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
> >>>>>=20
> >>>>> ? List valid disk boot devices
> >>>>> . Yield 1 second (for background tasks)
> >>>>> <empty line> Abort manual input
> >>>>>=20
> >>>>> mountroot> ?
> >>>>>=20
> >>>>> List of GEOM managed disk devices:
> >>>>>=20
> >>>>>=20
> >>>>> mountroot>
> >>>>> _______________________________________________
> >>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mailing li=
st
> >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lis=
ts.freebsd.org/mailman/listinfo/freebsd-arm>
> >>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.o=
rg <mailto:freebsd-arm-unsubscribe@freebsd.org>"
> >>>>>=20
> >>>>> _______________________________________________
> >>>>> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mailing li=
st
> >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lis=
ts.freebsd.org/mailman/listinfo/freebsd-arm>
> >>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.o=
rg <mailto:freebsd-arm-unsubscribe@freebsd.org>"
> >>>>=20
> >>>=20
> >>>=20
> >>> --
> >>> Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
> >>=20
> >=20
> >=20
> > --=20
> > Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
--=20
Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190816152454.4e54ab5c276a543c120d909a>