Date: Tue, 09 Feb 2021 16:47:49 +0900 From: KIRIYAMA Kazuhiko <kiri@truefc.org> To: Jesper Schmitz Mouridsen <jsm@FreeBSD.org> Cc: KIRIYAMA Kazuhiko <kiri@truefc.org>, freebsd-arm@freebsd.org Subject: Re: Pinebook Pro display. Message-ID: <202102090747.1197ln92039484@kx.truefc.org> In-Reply-To: <13e0a834-6c93-7d59-120f-59a5112fe365@FreeBSD.org> References: <3161cf79-0ec1-a3bc-801f-084d014ca92d@FreeBSD.org> <202102040606.11466HZB089892@kx.truefc.org> <9dcde0d6-ccd9-af13-dffa-5a80d221cff9@FreeBSD.org> <202102080652.1186qEGm050474@kx.truefc.org> <36699f90-fadd-86db-d6ee-62fadc0caf95@FreeBSD.org> <202102082257.118MverB010524@kx.truefc.org> <13e0a834-6c93-7d59-120f-59a5112fe365@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 09 Feb 2021 16:26:52 +0900, Jesper Schmitz Mouridsen wrote: > > > On 08.02.2021 23.57, KIRIYAMA Kazuhiko wrote: > > On Mon, 08 Feb 2021 17:20:38 +0900, > > Jesper Schmitz Mouridsen wrote: > >> > >> On 08.02.2021 07.52, KIRIYAMA Kazuhiko wrote: > >>> On Thu, 04 Feb 2021 22:24:05 +0900, > >>> Jesper Schmitz Mouridsen wrote: > >>>> On 04.02.2021 07.06, KIRIYAMA Kazuhiko wrote: > >>>>> Hi, Jesper > >>>>> > >>>>> On Mon, 01 Feb 2021 00:49:24 +0900, > >>>>> Jesper Schmitz Mouridsen wrote: > >>>>>> Hi > >>>>>> > >>>>>> Just for information, I did some trial and error on u-boot for the > >>>>>> > >>>>>> Pinebook Pro in order to have display working without hacking > >>>>>> > >>>>>> the kernel. See https://github.com/jsm222/ports and > >>>>> I've modified for u-boot-2020.10 [1] and remade > >>>>> idbloader.img and u-boot.itb then install those and reboot. > >>>>> But could not display console ;-( > >>>> I sent you a PM with a patch. > >>>> > >>>> Also we did some duplicate work, see > >>>> > >>>> https://github.com/jsm222/u-boot-pinebookpro > >>> I've tested above, it display until FreeBSD kernel boot but > >>> blackout after. Namely display console > >>> from `U-Boot 2020.10 (Feb 08 2021 -10:55:28 +0900)' > >>> to `masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000' > >>> and blackout after '---<<BOOT>>---' in the below log : > >>> > >>> root@kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0 > >>> Connected > >>> > >>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28) > >>> Channel 0: LPDDR4, 50MHz > >>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > >>> Channel 1: LPDDR4, 50MHz > >>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > >>> 256B stride > >>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > >>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > >>> Trying to boot from BOOTROM > >>> Returning to boot ROM... > >> Hi, you also need to copy the u-boot dtb files to the efi partition > >> > >> from /usr/ports/sysutils/u-boot-pinebookpro/work/u-boot-2020.10. > >> > >> sudo find . -name "*.dtb" -exec cp -iv {} /mnt/dtb/rockchip/ \; > > I'd copied *.dtb to /mnt/dtb/rockchip as follows : > > > > root@kazu:~ # gpart show mmcsd0 > > => 40 244277168 mmcsd0 GPT (116G) > > 40 32728 - free - (16M) > > 32768 102400 1 efi (50M) > > 135168 16777216 2 freebsd-swap (8.0G) > > 16912384 227364736 3 freebsd-ufs (108G) > > 244277120 88 - free - (44K) > > > > root@kazu:~ # mount_msdosfs /dev/mmcsd0p1 /mnt > > root@kazu:~ # ll /mnt/dtb/rockchip/ > > total 1624 > > -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 dt-spl.dtb* > > -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 dt.dtb* > > -rwxr-xr-x 1 root wheel 58854 Feb 8 20:02 rk3399-evb.dtb* > > -rwxr-xr-x 1 root wheel 62750 Feb 8 20:02 rk3399-ficus.dtb* > > -rwxr-xr-x 1 root wheel 63968 Feb 8 20:02 rk3399-firefly.dtb* > > -rwxr-xr-x 1 root wheel 66411 Feb 8 20:02 rk3399-gru-bob.dtb* > > -rwxr-xr-x 1 root wheel 63354 Feb 8 20:02 rk3399-khadas-edge-captain.dtb* > > -rwxr-xr-x 1 root wheel 63346 Feb 8 20:02 rk3399-khadas-edge-v.dtb* > > -rwxr-xr-x 1 root wheel 63291 Feb 8 20:02 rk3399-khadas-edge.dtb* > > -rwxr-xr-x 1 root wheel 61094 Feb 8 20:02 rk3399-leez-p710.dtb* > > -rwxr-xr-x 1 root wheel 63784 Feb 8 20:02 rk3399-nanopc-t4.dtb* > > -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4-2gb.dtb* > > -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4.dtb* > > -rwxr-xr-x 1 root wheel 62753 Feb 8 20:02 rk3399-nanopi-neo4.dtb* > > -rwxr-xr-x 1 root wheel 64009 Feb 8 20:02 rk3399-orangepi.dtb* > > -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 rk3399-pinebook-pro.dtb* > > -rwxr-xr-x 1 root wheel 56223 Feb 8 20:02 rk3399-puma-haikou.dtb* > > -rwxr-xr-x 1 root wheel 65035 Feb 8 20:02 rk3399-roc-pc-mezzanine.dtb* > > -rwxr-xr-x 1 root wheel 63850 Feb 8 20:02 rk3399-roc-pc.dtb* > > -rwxr-xr-x 1 root wheel 55473 Feb 8 20:02 rk3399-rock-pi-4a.dtb* > > -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4b.dtb* > > -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4c.dtb* > > -rwxr-xr-x 1 root wheel 62376 Feb 8 20:02 rk3399-rock960.dtb* > > -rwxr-xr-x 1 root wheel 63651 Feb 8 20:02 rk3399-rockpro64.dtb* > > -rwxr-xr-x 1 root wheel 59921 Feb 8 20:02 rk3399pro-rock-pi-n10.dtb* > > -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-spl.dtb* > > -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-tpl.dtb* > > -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 u-boot.dtb* > > root@kazu:~ # > > > > But does not display console as well ;-) Boot log is as > > follows : > > Hi, > > What is your output of > > sysctl hw.clock.aclk_vop1 > > my output is: > > hw.clock.aclk_vop1.enable_cnt: 0 > hw.clock.aclk_vop1.childrens: > hw.clock.aclk_vop1.parents: aclk_vop1_pre > hw.clock.aclk_vop1.parent: aclk_vop1_pre > hw.clock.aclk_vop1.frequency: 594000000 > and sysctl hw.clock.cpll > > my output is: > > hw.clock.cpll.enable_cnt: 16 > hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c > aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c clk_crypto0_c clk_crypto1_c > clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c > clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src > clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c > aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre > clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c > clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace > cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src > cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src > cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c clk_sdmmc_c > hw.clock.cpll.parents: xin24m xin32k > hw.clock.cpll.parent: xin24m > hw.clock.cpll.frequency: 800000000 My outputs are : root@kazu:~ # sysctl hw.clock.aclk_vop1 hw.clock.aclk_vop1.enable_cnt: 0 hw.clock.aclk_vop1.childrens: hw.clock.aclk_vop1.parents: aclk_vop1_pre hw.clock.aclk_vop1.parent: aclk_vop1_pre hw.clock.aclk_vop1.frequency: 594000000 root@kazu:~ # sysctl hw.clock.cpll hw.clock.cpll.enable_cnt: 14 hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c hclk_sd_c clk_crypto0_c clk_crypto1_c clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c hw.clock.cpll.parents: xin24m xin32k hw.clock.cpll.parent: xin24m hw.clock.cpll.frequency: 800000000 root@kazu:~ # Regards --- Kazuhiko Kiriyama <kiri@truefc.org> > > /Jesper > > > > root@kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0 > > Connected > > > > U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28) > > Channel 0: LPDDR4, 50MHz > > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > > Channel 1: LPDDR4, 50MHz > > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > > 256B stride > > lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > > lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > > Trying to boot from BOOTROM > > Returning to boot ROM... > > > > U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900) > > Trying to boot from MMC2 > > > > > > U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900) > > Consoles: EFI console > > Reading loader env vars from /efi/freebsd/loader.env > > Setting currdev to disk0p1: > > FreeBSD/arm64 EFI loader, Revision 1.1 > > (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) > > > > Command line arguments: loader.efi > > Image base: 0xf3df0000 > > EFI version: 2.80 > > EFI Firmware: Das U-Boot (rev 8224.4096) > > Console: comconsole (0) > > Load Path: /efi\boot\bootaa64.efi > > Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) > > Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) > > Setting currdev to disk0p1: > > Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000) > > Setting currdev to disk0p2: > > Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80) > > Setting currdev to disk0p3: > > Loading /boot/defaults/loader.conf > > Loading /boot/defaults/loader.conf > > Loading /boot/device.hints > > Loading /boot/loader.conf > > Loading /boot/loader.conf.local > > c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| ! |_| ! > > \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop > > [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop > > [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop > > [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop > > [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop > > [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop > > [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop > > [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop > > [25;0HLoading kernel... > > /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e] > > Loading configured modules... > > /etc/hostid size=0x25 > > /boot/entropy size=0x1000 > > Using DTB provided by EFI at 0x80ec000. > > EFI framebuffer information: > > addr, size 0xf7800000, 0x3f4800 > > dimensions 1920 x 1080 > > stride 1920 > > masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 > > ---<<BOOT>>--- > > KDB: debugger backends: ddb > > KDB: current backend: ddb > > Copyright (c) 1992-2020 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD is a registered trademark of The FreeBSD Foundation. > > FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 > > admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 > > FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) > > WARNING: WITNESS option enabled, expect reduced performance. > > VT(efifb): resolution 1920x1080 > > module firmware already present! > > real memory = 4158373888 (3965 MB) > > avail memory = 4025094144 (3838 MB) > > Starting CPU 1 (1) > > Starting CPU 2 (2) > > Starting CPU 3 (3) > > Starting CPU 4 (100) > > Starting CPU 5 (101) > > FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs > > random: unblocking device. > > random: entropy device external interface > > MAP f3f16000 mode 2 pages 4 > > MAP f3f1b000 mode 2 pages 4 > > MAP f6f40000 mode 2 pages 16 > > WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. > > kbd0 at kbdmux0 > > WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. > > ofwbus0: <Open Firmware Device Tree> > > clk_fixed0: <Fixed clock> on ofwbus0 > > simplebus0: <Flattened device tree simple bus> on ofwbus0 > > rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0 > > rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0 > > rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0 > > rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0 > > regfix0: <Fixed Regulator> on ofwbus0 > > regfix1: <Fixed Regulator> on ofwbus0 > > regfix2: <Fixed Regulator> on ofwbus0 > > regfix3: <Fixed Regulator> on ofwbus0 > > regfix4: <Fixed Regulator> on ofwbus0 > > regfix5: <Fixed Regulator> on ofwbus0 > > regfix6: <Fixed Regulator> on ofwbus0 > > regfix7: <Fixed Regulator> on ofwbus0 > > regfix8: <Fixed Regulator> on ofwbus0 > > regfix9: <Fixed Regulator> on ofwbus0 > > regfix10: <Fixed Regulator> on ofwbus0 > > regfix11: <Fixed Regulator> on ofwbus0 > > simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0 > > psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 > > gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0 > > its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0 > > rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0 > > rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1 > > rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 > > gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0 > > gpiobus0: <OFW GPIO bus> on gpio0 > > gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0 > > gpiobus1: <OFW GPIO bus> on gpio1 > > gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0 > > gpiobus2: <OFW GPIO bus> on gpio2 > > gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0 > > gpiobus3: <OFW GPIO bus> on gpio3 > > gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0 > > gpiobus4: <OFW GPIO bus> on gpio4 > > rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 > > iicbus0: <OFW I2C bus> on rk_i2c0 > > rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 > > iicbus1: <OFW I2C bus> on rk_i2c1 > > rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 > > iicbus2: <OFW I2C bus> on rk_i2c2 > > syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 > > rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 > > iicbus3: <OFW I2C bus> on rk_i2c3 > > rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 > > generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 > > Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 > > Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 > > rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0 > > rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > > rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > > rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > > rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > > rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0 > > rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0 > > cpulist0: <Open Firmware CPU Group> on ofwbus0 > > cpu0: <Open Firmware CPU> on cpulist0 > > cpufreq_dt0: <Generic cpufreq driver> on cpu0 > > cpu1: <Open Firmware CPU> on cpulist0 > > cpufreq_dt1: <Generic cpufreq driver> on cpu1 > > cpu2: <Open Firmware CPU> on cpulist0 > > cpufreq_dt2: <Generic cpufreq driver> on cpu2 > > cpu3: <Open Firmware CPU> on cpulist0 > > cpufreq_dt3: <Generic cpufreq driver> on cpu3 > > cpu4: <Open Firmware CPU> on cpulist0 > > cpufreq_dt4: <Generic cpufreq driver> on cpu4 > > cpu5: <Open Firmware CPU> on cpulist0 > > cpufreq_dt5: <Generic cpufreq driver> on cpu5 > > pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0 > > pcib0: Gen1 link training timeouted: 0x00080001. > > pci0: <PCI bus> on pcib0 > > pcib1: <PCI-PCI bridge> at device 0.0 on pci0 > > pcib0: failed to reserve resource for pcib1 > > pcib1: failed to allocate initial memory window: 0-0xfffff > > pci1: <PCI bus> on pcib1 > > rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 > > rockchip_dwmmc0: Hardware version ID is 270a > > rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 > > rockchip_dwmmc1: Hardware version ID is 270a > > sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0 > > rk_emmcphy0: got emmcclk clock > > sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. > > sdhci_fdt0: 1 slot(s) allocated > > mmc0: <MMC/SD bus> on sdhci_fdt0 > > ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0 > > usbus0: EHCI version 1.0 > > usbus0 on ehci0 > > ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0 > > usbus1 on ohci0 > > ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0 > > usbus2: EHCI version 1.0 > > usbus2 on ehci1 > > ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0 > > usbus3 on ohci1 > > rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 > > xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30 > > xhci0: 64 bytes context size, 32-bit DMA > > usbus4: trying to attach > > usbus4 on xhci0 > > rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 > > xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31 > > xhci1: 64 bytes context size, 32-bit DMA > > usbus5: trying to attach > > usbus5 on xhci1 > > iicbus0: <unknown card> at addr 0x22 > > iic0: <I2C generic I/O> on iicbus0 > > iic1: <I2C generic I/O> on iicbus1 > > uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0 > > uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0 > > uart1: console (1500000,n,8,1) > > spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 > > spibus0: <OFW SPI bus> on spi0 > > spibus0: <unknown card> at cs 0 mode 0 > > iicbus2: <unknown card> at addr 0x82 > > iic2: <I2C generic I/O> on iicbus2 > > iicbus3: <unknown card> at addr 0x44 > > iic3: <I2C generic I/O> on iicbus3 > > pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 > > pwmbus0: <OFW PWM bus> on pwm0 > > pwmc0: <PWM Control> channel 0 on pwmbus0 > > pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 > > pwmbus1: <OFW PWM bus> on pwm1 > > pwmc1: <PWM Control> channel 0 on pwmbus1 > > gpioc0: <GPIO controller> on gpio0 > > gpioc1: <GPIO controller> on gpio1 > > gpioc2: <GPIO controller> on gpio2 > > gpioc3: <GPIO controller> on gpio3 > > gpioc4: <GPIO controller> on gpio4 > > gpioled0: <GPIO LEDs> on ofwbus0 > > cryptosoft0: <software crypto> > > Timecounters tick every 1.000 msec > > usbus0: 480Mbps High Speed USB v2.0 > > usbus1: 12Mbps Full Speed USB v1.0 > > usbus2: 480Mbps High Speed USB v2.0 > > usbus3: 12Mbps Full Speed USB v1.0 > > usbus4: 5.0Gbps Super Speed USB v3.0 > > usbus5: 5.0Gbps Super Speed USB v3.0 > > ugen3.1: <Generic OHCI root HUB> at usbus3 > > uhub0 on usbus3 > > uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > > ugen2.1: <Generic EHCI root HUB> at usbus2 > > uhub1 on usbus2 > > uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > > ugen1.1: <Generic OHCI root HUB> at usbus1 > > uhub2 on usbus1 > > uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > > ugen0.1: <Generic EHCI root HUB> at usbus0 > > uhub3 on usbus0 > > uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > > ugen5.1: <Synopsys XHCI root HUB> at usbus5 > > uhub4 on usbus5 > > uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 > > ugen4.1: <Synopsys XHCI root HUB> at usbus4 > > uhub5 on usbus4 > > uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 > > mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block > > mmcsd0boot0: 4MB partition 1 at mmcsd0 > > mmcsd0boot1: 4MB partition 2 at mmcsd0 > > mmcsd0rpmb: 17MB partition 3 at mmcsd0 > > Release APs...done > > CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 > > Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > > Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> > > Instruction Set Attributes 1 = <> > > Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> > > Processor Features 1 = <> > > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > > Memory Model Features 1 = <8bit VMID> > > Memory Model Features 2 = <32bit CCIDX,48bit VA> > > Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... > > Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> > > Debug Features 1 = <> > > Auxiliary Features 0 = <> > > Auxiliary Features 1 = <> > > CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 > > Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > > CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 > > Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > > CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 > > Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > > CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 > > Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> > > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> > > CPU 5: ARM Cortex- Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> > > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> > > WARNING: WITNESS option enabled, expect reduced performance. > > Unresolved linked clock found: clkin_gmac > > uhub0: 1 port with 1 removable, self powered > > uhub2: 1 port with 1 removable, self powered > > uhub5: 2 ports with 2 removable, self powered > > Warning: no time-of-day clock registered, uhub4: 2 ports with 2 removable, self powered > > system time will not be set accurately > > uhub1: 1 port with 1 removable, self powered > > uhub3: 1 port with 1 removable, self powered > > Setting hostuuid: 31323634-3737-6236-6162-336630376339. > > Setting hostid: 0x5d4b60f9. > > Starting file system checks: > > /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS > > /dev/mmcsd0p3: clean, 27264084 free (348 frags, 3407967 blocks, 0.0% fragmentation) > > lock order reversal: > > 1st 0xffffa00062d92810 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724 > > 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918 > > lock order devfs -> ufs established at: > > #0 0xffff000000569234 at witness_checkorder+0x448 > > #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 > > #2 0xffff00000075ad38 at ffs_lock+0x64 > > #3 0xffff0000005ed57c at _vn_lock+0x54 > > #4 0xffff0000005ce630 at vfs_domount+0xdf8 > > #5 0xffff0000005cca08 at vfs_donmount+0x2b4 > > #6 0xffff0000005d0e78 at kernel_mount+0x4c > > #7 0xffff0000005d3564 at parse_mount+0x49c > > #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc > > #9 0xffff00000048dc68 at start_init+0x24 > > #10 0xffff0000004b7474 at fork_exit+0x7c > > lock order ufs -> devfs attempted at: > > #0 0xffff000000569a40 at witness_checkorder+0xc54 > > #1 0xffff0000004cd560 at lockmgr_xlock+0x50 > > #2 0xffff0000005ed57c at _vn_lock+0x54 > > #3 0xffff0000005d77d8 at vget_finish+0x4c > > #4 0xffff0000003b1b30 at devfs_allocv+0xd0 > > #5 0xffff0000003b12c0 at devfs_root+0x44 > > #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 > > #7 0xffff0000005d89b0 at vflush+0x5c > > #8 0xffff0000003b11c8 at devfs_unmount+0x34 > > #9 0xffff0000005cf4c4 at dounmount+0x43c > > #10 0xffff0000005cf040 at kern_unmount+0x2d8 > > #11 0xffff000000812d0c at do_el0_sync+0x454 > > #12 0xffff0000007f2a24 at handle_el0_sync+0x90 > > Mounting local filesystems:. > > ELF ldconfig path: /lib /usr/lib /usr/lib/compat > > Setting hostname: kazu.tfc. > > ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 > > ukbd0 on uhub2 > > ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1 > > kbd1 at ukbd0 > > Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > > Feeding entropy: . > > lo0: link state changed to UP > > Starting Network: lo0. > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > > options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > > inet 127.0.0.1 netmask 0xff000000 > > groups: lo > > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > > Starting devd. > > Autoloading module: mx25l.ko > > mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 > > mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K > > Autoloading module: pwm_backlight.ko > > link_elf: symbol backlight_get_info_desc undefined > > kldload: can't load pwm_backlight.ko: No such file or directory > > Autoloading module: uhid.ko > > Autoloading module: wmt.ko > > add host 127.0.0.1: gateway lo0 fib 0: route already in table > > route: writing to routing socket: Network is unreachable > > add net default: gateway 192.168.1.254 fib 0: Network is unreachable > > add host ::1: gateway lo0 fib 0: route already in table > > add net fe80::: gateway ::1 > > add net ff02::: gateway ::1 > > add net ::ffff:0.0.0.0: gateway ::1 > > add net ::0.0.0.0: gateway ::1 > > Updating /var/run/os-release done. > > Creating and/or trimming log files. > > Updating motd:. > > Clearing /tmp (X related). > > Starting syslogd. > > No core dumps found. > > Mounting late filesystems:. > > Security policy loaded: MAC/ntpd (mac_ntpd) > > Starting ntpd. > > Feb 9 07:23:09 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago > > Performing sanity check on sshd configuration. > > Starting sshd. > > Starting cron. > > Starting sendmail. > > Starting sendmail_msp_queue. > > Feb 9 07:23:10 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8) > > Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory > > /etc/rc: WARNING: Unable to load kernel module logo_saver > > . > > Starting background file system checks in 60 seconds. > > > > Tue Feb 9 07:23:11 JST 2021 > > > > FreeBSD/arm64 (kazu.tfc) (ttyu1) > > > > login: > > > >> after make. Otherwise the ACLK_VOP1 goes to 800000000, and > >> > >> we lose display. > >> > >> /Jesper > >> > >>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900) > >>> Trying to boot from MMC2 > >>> > >>> > >>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900) > >>> Consoles: EFI console > >>> Reading loader env vars from /efi/freebsd/loader.env > >>> Setting currdev to disk0p1: > >>> FreeBSD/arm64 EFI loader, Revision 1.1 > >>> (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) > >>> > >>> Command line arguments: loader.efi > >>> Image base: 0xf3df0000 > >>> EFI version: 2.80 > >>> EFI Firmware: Das U-Boot (rev 8224.4096) > >>> Console: comconsole (0) > >>> Load Path: /efi\boot\bootaa64.efi > >>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) > >>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) > >>> Setting currdev to disk0p1: > >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000) > >>> Setting currdev to disk0p2: > >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80) > >>> Setting currdev to disk0p3: > >>> Loading /boot/defaults/loader.conf > >>> Loading /boot/defaults/loader.conf > >>> Loading /boot/device.hints > >>> Loading /boot/loader.conf > >>> Loading /boot/loader.conf.local > >>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| ! ! > > |_| ! > >>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop > >>> [25;0HLoading kernel... > >>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e] > >>> Loading configured modules... > >>> /etc/hostid size=0x25 > >>> /boot/entropy size=0x1000 > >>> Using DTB provided by EFI at 0x80ec000. > >>> EFI framebuffer information: > >>> addr, size 0xf7800000, 0x3f4800 > >>> dimensions 1920 x 1080 > >>> stride 1920 > >>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 > >>> ---<<BOOT>>--- > >>> KDB: debugger backends: ddb > >>> KDB: current backend: ddb > >>> Copyright (c) 1992-2020 The FreeBSD Project. > >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > >>> The Regents of the University of California. All rights reserved. > >>> FreeBSD is a registered trademark of The FreeBSD Foundation. > >>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 > >>> admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 > >>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) > >>> WARNING: WITNESS option enabled, expect reduced performance. > >>> VT(efifb): resolution 1920x1080 > >>> module firmware already present! > >>> real memory = 4158373888 (3965 MB) > >>> avail memory = 4025094144 (3838 MB) > >>> Starting CPU 1 (1) > >>> Starting CPU 2 (2) > >>> Starting CPU 3 (3) > >>> Starting CPU 4 (100) > >>> Starting CPU 5 (101) > >>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs > >>> random: unblocking device. > >>> random: entropy device external interface > >>> MAP f3f16000 mode 2 pages 4 > >>> MAP f3f1b000 mode 2 pages 4 > >>> MAP f6f40000 mode 2 pages 16 > >>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. > >>> kbd0 at kbdmux0 > >>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. > >>> ofwbus0: <Open Firmware Device Tree> > >>> clk_fixed0: <Fixed clock> on ofwbus0 > >>> simplebus0: <Flattened device tree simple bus> on ofwbus0 > >>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0 > >>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0 > >>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0 > >>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0 > >>> regfix0: <Fixed Regulator> on ofwbus0 > >>> regfix1: <Fixed Regulator> on ofwbus0 > >>> regfix2: <Fixed Regulator> on ofwbus0 > >>> regfix3: <Fixed Regulator> on ofwbus0 > >>> regfix4: <Fixed Regulator> on ofwbus0 > >>> regfix5: <Fixed Regulator> on ofwbus0 > >>> regfix6: <Fixed Regulator> on ofwbus0 > >>> regfix7: <Fixed Regulator> on ofwbus0 > >>> regfix8: <Fixed Regulator> on ofwbus0 > >>> regfix9: <Fixed Regulator> on ofwbus0 > >>> regfix10: <Fixed Regulator> on ofwbus0 > >>> regfix11: <Fixed Regulator> on ofwbus0 > >>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0 > >>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 > >>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0 > >>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0 > >>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0 > >>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 > >>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0 > >>> gpiobus0: <OFW GPIO bus> on gpio0 > >>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0 > >>> gpiobus1: <OFW GPIO bus> on gpio1 > >>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0 > >>> gpiobus2: <OFW GPIO bus> on gpio2 > >>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0 > >>> gpiobus3: <OFW GPIO bus> on gpio3 > >>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0 > >>> gpiobus4: <OFW GPIO bus> on gpio4 > >>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 > >>> iicbus0: <OFW I2C bus> on rk_i2c0 > >>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 > >>> iicbus1: <OFW I2C bus> on rk_i2c1 > >>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 > >>> iicbus2: <OFW I2C bus> on rk_i2c2 > >>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 > >>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 > >>> iicbus3: <OFW I2C bus> on rk_i2c3 > >>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 > >>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 > >>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 > >>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 > >>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0 > >>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0 > >>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0 > >>> cpulist0: <Open Firmware CPU Group> on ofwbus0 > >>> cpu0: <Open Firmware CPU> on cpulist0 > >>> cpufreq_dt0: <Generic cpufreq driver> on cpu0 > >>> cpu1: <Open Firmware CPU> on cpulist0 > >>> cpufreq_dt1: <Generic cpufreq driver> on cpu1 > >>> cpu2: <Open Firmware CPU> on cpulist0 > >>> cpufreq_dt2: <Generic cpufreq driver> on cpu2 > >>> cpu3: <Open Firmware CPU> on cpulist0 > >>> cpufreq_dt3: <Generic cpufreq driver> on cpu3 > >>> cpu4: <Open Firmware CPU> on cpulist0 > >>> cpufreq_dt4: <Generic cpufreq driver> on cpu4 > >>> cpu5: <Open Firmware CPU> on cpulist0 > >>> cpufreq_dt5: <Generic cpufreq driver> on cpu5 > >>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0 > >>> pcib0: Gen1 link training timeouted: 0x00080001. > >>> pci0: <PCI bus> on pcib0 > >>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0 > >>> pcib0: failed to reserve resource for pcib1 > >>> pcib1: failed to allocate initial memory window: 0-0xfffff > >>> pci1: <PCI bus> on pcib1 > >>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 > >>> rockchip_dwmmc0: Hardware version ID is 270a > >>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 > >>> rockchip_dwmmc1: Hardware version ID is 270a > >>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0 > >>> rk_emmcphy0: got emmcclk clock > >>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. > >>> sdhci_fdt0: 1 slot(s) allocated > >>> mmc0: <MMC/SD bus> on sdhci_fdt0 > >>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0 > >>> usbus0: EHCI version 1.0 > >>> usbus0 on ehci0 > >>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0 > >>> usbus1 on ohci0 > >>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0 > >>> usbus2: EHCI version 1.0 > >>> usbus2 on ehci1 > >>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0 > >>> usbus3 on ohci1 > >>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 > >>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30 > >>> xhci0: 64 bytes context size, 32-bit DMA > >>> usbus4: trying to attach > >>> usbus4 on xhci0 > >>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 > >>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31 > >>> xhci1: 64 bytes context size, 32-bit DMA > >>> usbus5: trying to attach > >>> usbus5 on xhci1 > >>> iicbus0: <unknown card> at addr 0x22 > >>> iic0: <I2C generic I/O> on iicbus0 > >>> iic1: <I2C generic I/O> on iicbus1 > >>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0 > >>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0 > >>> uart1: console (1500000,n,8,1) > >>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 > >>> spibus0: <OFW SPI bus> on spi0 > >>> spibus0: <unknown card> at cs 0 mode 0 > >>> iicbus2: <unknown card> at addr 0x82 > >>> iic2: <I2C generic I/O> on iicbus2 > >>> iicbus3: <unknown card> at addr 0x44 > >>> iic3: <I2C generic I/O> on iicbus3 > >>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 > >>> pwmbus0: <OFW PWM bus> on pwm0 > >>> pwmc0: <PWM Control> channel 0 on pwmbus0 > >>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 > >>> pwmbus1: <OFW PWM bus> on pwm1 > >>> pwmc1: <PWM Control> channel 0 on pwmbus1 > >>> gpioc0: <GPIO controller> on gpio0 > >>> gpioc1: <GPIO controller> on gpio1 > >>> gpioc2: <GPIO controller> on gpio2 > >>> gpioc3: <GPIO controller> on gpio3 > >>> gpioc4: <GPIO controller> on gpio4 > >>> gpioled0: <GPIO LEDs> on ofwbus0 > >>> cryptosoft0: <software crypto> > >>> Timecounters tick every 1.000 msec > >>> usbus0: 480Mbps High Speed USB v2.0 > >>> usbus1: 12Mbps Full Speed USB v1.0 > >>> usbus2: 480Mbps High Speed USB v2.0 > >>> usbus3: 12Mbps Full Speed USB v1.0 > >>> usbus4: 5.0Gbps Super Speed USB v3.0 > >>> usbus5: 5.0Gbps Super Speed USB v3.0 > >>> ugen3.1: <Generic OHCI root HUB> at usbus3 > >>> uhub0 on usbus3 > >>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > >>> ugen2.1: <Generic EHCI root HUB> at usbus2 > >>> uhub1 on usbus2 > >>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > >>> ugen1.1: <Generic OHCI root HUB> at usbus1 > >>> uhub2 on usbus1 > >>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > >>> ugen0.1: <Generic EHCI root HUB> at usbus0 > >>> uhub3 on usbus0 > >>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > >>> ugen5.1: <Synopsys XHCI root HUB> at usbus5 > >>> uhub4 on usbus5 > >>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 > >>> ugen4.1: <Synopsys XHCI root HUB> at usbus4 > >>> uhub5 on usbus4 > >>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 > >>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block > >>> mmcsd0boot0: 4MB partition 1 at mmcsd0 > >>> mmcsd0boot1: 4MB partition 2 at mmcsd0 > >>> mmcsd0rpmb: 17MB partition 3 at mmcsd0 > >>> Release APs...done > >>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 > >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> > >>> Instruction Set Attributes 1 = <> > >>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> > >>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... > >>> Processor Features 1 = <> > >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>> Memory Model Features 1 = <8bit VMID> > >>> Memory Model Features 2 = <32bit CCIDX,48bit VA> > >>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> > >>> Debug Features 1 = <> > >>> Auxiliary Features 0 = <> > >>> Auxiliary Features 1 = <> > >>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 > >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 > >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 > >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 > >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> > >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> > >>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 > >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> > >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> > >>> WARNING: WITNESS option enabled, expect reduced performance. > >>> Unresolved linked clock found: clkin_gmac > >>> uhub0: 1 port with 1 removable, self powered > >>> uhub2: 1 port with 1 removable, self powered > >>> uhub5: 2 ports with 2 removable, self powered > >>> uhub4: 2 ports with 2 removable, self powered > >>> Warning: no time-of-day clock registered, system time will not be set accurately > >>> uhub1: 1 port with 1 removable, self powered > >>> uhub3: 1 port with 1 removable, self powered > >>> Setting hostuuid: 31323634-3737-6236-6162-336630376339. > >>> Setting hostid: 0x5d4b60f9. > >>> Starting file system checks: > >>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS > >>> /dev/mmcsd0p3: clean, 27264803 free (363 frags, 3408055 blocks, 0.0% fragmentation) > >>> lock order reversal: > >>> 1st 0xffffa00062c99440 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724 > >>> 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918 > >>> lock order devfs -> ufs established at: > >>> #0 0xffff000000569234 at witness_checkorder+0x448 > >>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 > >>> #2 0xffff00000075ad38 at ffs_lock+0x64 > >>> #3 0xffff0000005ed57c at _vn_lock+0x54 > >>> #4 0xffff0000005ce630 at vfs_domount+0xdf8 > >>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4 > >>> #6 0xffff0000005d0e78 at kernel_mount+0x4c > >>> #7 0xffff0000005d3564 at parse_mount+0x49c > >>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc > >>> #9 0xffff00000048dc68 at start_init+0x24 > >>> #10 0xffff0000004b7474 at fork_exit+0x7c > >>> lock order ufs -> devfs attempted at: > >>> #0 0xffff000000569a40 at witness_checkorder+0xc54 > >>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50 > >>> #2 0xffff0000005ed57c at _vn_lock+0x54 > >>> #3 0xffff0000005d77d8 at vget_finish+0x4c > >>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0 > >>> #5 0xffff0000003b12c0 at devfs_root+0x44 > >>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 > >>> #7 0xffff0000005d89b0 at vflush+0x5c > >>> #8 0xffff0000003b11c8 at devfs_unmount+0x34 > >>> #9 0xffff0000005cf4c4 at dounmount+0x43c > >>> #10 0xffff0000005cf040 at kern_unmount+0x2d8 > >>> #11 0xffff000000812d0c at do_el0_sync+0x454 > >>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90 > >>> Mounting local filesystems:. > >>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat > >>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 > >>> ukbd0 on uhub2 > >>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1 > >>> kbd1 at ukbd0 > >>> Setting hostname: kazu.tfc. > >>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > >>> Feeding entropy: . > >>> lo0: link state changed to UP > >>> Starting Network: lo0. > >>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > >>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> > >>> inet6 ::1 prefixlen 128 > >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > >>> inet 127.0.0.1 netmask 0xff000000 > >>> groups: lo > >>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > >>> Starting devd. > >>> Autoloading module: mx25l.ko > >>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 > >>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K > >>> Autoloading module: pwm_backlight.ko > >>> link_elf: symbol backlight_get_info_desc undefined > >>> kldload: can't load pwm_backlight.ko: No such file or directory > >>> Autoloading module: uhid.ko > >>> Autoloading module: wmt.ko > >>> add host 127.0.0.1: gateway lo0 fib 0: route already in table > >>> route: writing to routing socket: Network is unreachable > >>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable > >>> add host ::1: gateway lo0 fib 0: route already in table > >>> add net fe80::: gateway ::1 > >>> add net ff02::: gateway ::1 > >>> add net ::ffff:0.0.0.0: gateway ::1 > >>> add net ::0.0.0.0: gateway ::1 > >>> Updating /var/run/os-release done. > >>> Creating and/or trimming log files. > >>> Updating motd:. > >>> Clearing /tmp (X related). > >>> Starting syslogd. > >>> No core dumps found. > >>> Mounting late filesystems:. > >>> Security policy loaded: MAC/ntpd (mac_ntpd) > >>> Starting ntpd. > >>> Feb 8 15:24:40 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago > >>> Performing sanity check on sshd configuration. > >>> Starting sshd. > >>> Starting cron. > >>> Starting sendmail. > >>> Starting sendmail_msp_queue. > >>> Feb 8 15:24:41 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8) > >>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory > >>> /etc/rc: WARNING: Unable to load kernel module logo_saver > >>> . > >>> Starting background file system checks in 60 seconds. > >>> > >>> Mon Feb 8 15:24:42 JST 2021 > >>> > >>> FreeBSD/arm64 (kazu.tfc) (ttyu1) > >>> > >>> login: > >>> > >>> > >>>> regards > >>>> > >>>> /Jesper > >>>> > >>>>> root@kazu:~ # cu -s 1500000 -l /dev/cuaU0 > >>>>> Connected > >>>>> > >>>>> U-Boot TPL 2020.10 (Feb 03 2021 - 11:13:01) > >>>>> Channel 0: LPDDR4, 50MHz > >>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > >>>>> Channel 1: LPDDR4, 50MHz > >>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > >>>>> 256B stride > >>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > >>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > >>>>> Trying to boot from BOOTROM > >>>>> Returning to boot ROM... > >>>>> > >>>>> U-Boot SPL 2020.10 (Feb 03 2021 - 11:13:01 +0900) > >>>>> Trying to boot from MMC2 > >>>>> > >>>>> > >>>>> U-Boot 2020.10 (Feb 03 2021 - 11:13:01 +0900) > >>>>> > >>>>> SoC: Rockchip rk3399 > >>>>> Reset cause: POR > >>>>> Model: Pine64 Pinebook Pro > >>>>> DRAM: 3.9 GiB > >>>>> PMIC: RK808 > >>>>> MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 > >>>>> Loading Environment from SPIFlash... Invalid bus 0 (err=-19) > >>>>> *** Warning - spi_flash_probe_bus_cs() failed, using default environment > >>>>> > >>>>> In: serial > >>>>> Out: serial > >>>>> Err: serial > >>>>> Model: Pine64 Pinebook Pro > >>>>> Net: No ethernet found. > >>>>> Failed to load 'splash.bmp' > >>>>> Card did not respond to voltage select! > >>>>> Hit any key to stop autoboot: 0 > >>>>> Consoles: EFI console > >>>>> Read loader env vars from /efi/freebsd/loader.env > >>>>> Setting currdev to disk0p1: > >>>>> FreeBSD/arm64 EFI loader, Revision 1.1 > >>>>> (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) > >>>>> > >>>>> Command line arguments: loader.efi > >>>>> Image base: 0xf3dee000 > >>>>> EFI version: 2.80 > >>>>> EFI Firmware: Das U-Boot (rev 8224.4096) > >>>>> Console: comconsole (0) > >>>>> Load Path: /efi\boot\bootaa64.efi > >>>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000) > >>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000) > >>>>> Setting currdev to disk0p1: > >>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x21000,0x1000000) > >>>>> Setting currdev to disk0p2: > >>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x1021000,0xd8d4f80) > >>>>> Setting currdev to disk0p3: > >>>>> Loading /boot/defaults/loader.conf > >>>>> Loading /boot/defaults/loader.conf > >>>>> Loading /boot/device.hints > >>>>> Loading /boot/loader.conf > >>>>> Loading /boot/loader.conf.local > >>>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_! | ! > > ! > >>> |_| ! > >>>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 9 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 8 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 7 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop > >>>>> [25;0HLoading kernel... > >>>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e] > >>>>> Loading configured modules... > >>>>> /etc/hostid size=0x25 > >>>>> /boot/entropy size=0x1000 > >>>>> Using DTB provided by EFI at 0x80ec000. > >>>>> EFI framebuffer information: > >>>>> addr, size 0xf7800000, 0x3f4800 > >>>>> dimensions 1920 x 1080 > >>>>> stride 1920 > >>>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 > >>>>> ---<<BOOT>>--- > >>>>> KDB: debugger backends: ddb > >>>>> KDB: current backend: ddb > >>>>> Copyright (c) 1992-2020 The FreeBSD Project. > >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > >>>>> The Regents of the University of California. All rights reserved. > >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation. > >>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 > >>>>> admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 > >>>>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) > >>>>> WARNING: WITNESS option enabled, expect reduced performance. > >>>>> VT(efifb): resolution 1920x1080 > >>>>> module firmware already present! > >>>>> real memory = 4158377984 (3965 MB) > >>>>> avail memory = 4025098240 (3838 MB) > >>>>> Starting CPU 1 (1) > >>>>> Starting CPU 2 (2) > >>>>> Starting CPU 3 (3) > >>>>> Starting CPU 4 (100) > >>>>> Starting CPU 5 (101) > >>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs > >>>>> random: unblocking device. > >>>>> random: entropy device external interface > >>>>> MAP f3f16000 mode 2 pages 4 > >>>>> MAP f3f1b000 mode 2 pages 4 > >>>>> MAP f6f40000 mode 2 pages 16 > >>>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. > >>>>> kbd0 at kbdmux0 > >>>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. > >>>>> ofwbus0: <Open Firmware Device Tree> > >>>>> clk_fixed0: <Fixed clock> on ofwbus0 > >>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0 > >>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0 > >>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0 > >>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0 > >>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0 > >>>>> regfix0: <Fixed Regulator> on ofwbus0 > >>>>> regfix1: <Fixed Regulator> on ofwbus0 > >>>>> regfix2: <Fixed Regulator> on ofwbus0 > >>>>> regfix3: <Fixed Regulator> on ofwbus0 > >>>>> regfix4: <Fixed Regulator> on ofwbus0 > >>>>> regfix5: <Fixed Regulator> on ofwbus0 > >>>>> regfix6: <Fixed Regulator> on ofwbus0 > >>>>> regfix7: <Fixed Regulator> on ofwbus0 > >>>>> regfix8: <Fixed Regulator> on ofwbus0 > >>>>> regfix9: <Fixed Regulator> on ofwbus0 > >>>>> regfix10: <Fixed Regulator> on ofwbus0 > >>>>> regfix11: <Fixed Regulator> on ofwbus0 > >>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0 > >>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 > >>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0 > >>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0 > >>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0 > >>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 > >>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0 > >>>>> gpiobus0: <OFW GPIO bus> on gpio0 > >>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0 > >>>>> gpiobus1: <OFW GPIO bus> on gpio1 > >>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0 > >>>>> gpiobus2: <OFW GPIO bus> on gpio2 > >>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0 > >>>>> gpiobus3: <OFW GPIO bus> on gpio3 > >>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0 > >>>>> gpiobus4: <OFW GPIO bus> on gpio4 > >>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 > >>>>> iicbus0: <OFW I2C bus> on rk_i2c0 > >>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 > >>>>> iicbus1: <OFW I2C bus> on rk_i2c1 > >>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 > >>>>> iicbus2: <OFW I2C bus> on rk_i2c2 > >>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 > >>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 > >>>>> iicbus3: <OFW I2C bus> on rk_i2c3 > >>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 > >>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 > >>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 > >>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 > >>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0 > >>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffffrk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 > >>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0 > >>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0 > >>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0 > >>>>> cpu0: <Open Firmware CPU> on cpulist0 > >>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0 > >>>>> cpu1: <Open Firmware CPU> on cpulist0 > >>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1 > >>>>> cpu2: <Open Firmware CPU> on cpulist0 > >>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2 > >>>>> cpu3: <Open Firmware CPU> on cpulist0 > >>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3 > >>>>> cpu4: <Open Firmware CPU> on cpulist0 > >>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4 > >>>>> cpu5: <Open Firmware CPU> on cpulist0 > >>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5 > >>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0 > >>>>> pcib0: Gen1 link training timeouted: 0x00080001. > >>>>> pci0: <PCI bus> on pcib0 > >>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0 > >>>>> pcib0: failed to reserve resource for pcib1 > >>>>> pcib1: failed to allocate initial memory window: 0-0xfffff > >>>>> pci1: <PCI bus> on pcib1 > >>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 > >>>>> rockchip_dwmmc0: Hardware version ID is 270a > >>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 > >>>>> rockchip_dwmmc1: Hardware version ID is 270a > >>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0 > >>>>> rk_emmcphy0: got emmcclk clock > >>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. > >>>>> sdhci_fdt0: 1 slot(s) allocated > >>>>> mmc0: <MMC/SD bus> on sdhci_fdt0 > >>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0 > >>>>> usbus0: EHCI version 1.0 > >>>>> usbus0 on ehci0 > >>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0 > >>>>> usbus1 on ohci0 > >>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0 > >>>>> usbus2: EHCI version 1.0 > >>>>> usbus2 on ehci1 > >>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0 > >>>>> usbus3 on ohci1 > >>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 > >>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30 > >>>>> xhci0: 64 bytes context size, 32-bit DMA > >>>>> usbus4: trying to attach > >>>>> usbus4 on xhci0 > >>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 > >>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31 > >>>>> xhci1: 64 bytes context size, 32-bit DMA > >>>>> usbus5: trying to attach > >>>>> usbus5 on xhci1 > >>>>> iicbus0: <unknown card> at addr 0x22 > >>>>> iic0: <I2C generic I/O> on iicbus0 > >>>>> iic1: <I2C generic I/O> on iicbus1 > >>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0 > >>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0 > >>>>> uart1: console (1500000,n,8,1) > >>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 > >>>>> spibus0: <OFW SPI bus> on spi0 > >>>>> spibus0: <unknown card> at cs 0 mode 0 > >>>>> iicbus2: <unknown card> at addr 0x82 > >>>>> iic2: <I2C generic I/O> on iicbus2 > >>>>> iicbus3: <unknown card> at addr 0x44 > >>>>> iic3: <I2C generic I/O> on iicbus3 > >>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 > >>>>> pwmbus0: <OFW PWM bus> on pwm0 > >>>>> pwmc0: <PWM Control> channel 0 on pwmbus0 > >>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 > >>>>> pwmbus1: <OFW PWM bus> on pwm1 > >>>>> pwmc1: <PWM Control> channel 0 on pwmbus1 > >>>>> gpioc0: <GPIO controller> on gpio0 > >>>>> gpioc1: <GPIO controller> on gpio1 > >>>>> gpioc2: <GPIO controller> on gpio2 > >>>>> gpioc3: <GPIO controller> on gpio3 > >>>>> gpioc4: <GPIO controller> on gpio4 > >>>>> gpioled0: <GPIO LEDs> on ofwbus0 > >>>>> cryptosoft0: <software crypto> > >>>>> Timecounters tick every 1.000 msec > >>>>> usbus0: 480Mbps High Speed USB v2.0 > >>>>> usbus1: 12Mbps Full Speed USB v1.0 > >>>>> usbus2: 480Mbps High Speed USB v2.0 > >>>>> usbus3: 12Mbps Full Speed USB v1.0 > >>>>> usbus4: 5.0Gbps Super Speed USB v3.0 > >>>>> usbus5: 5.0Gbps Super Speed USB v3.0 > >>>>> ugen3.1: <Generic OHCI root HUB> at usbus3 > >>>>> uhub0 on usbus3 > >>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 > >>>>> ugen2.1: <Generic EHCI root HUB> at usbus2 > >>>>> uhub1 on usbus2 > >>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > >>>>> ugen1.1: <Generic OHCI root HUB> at usbus1 > >>>>> uhub2 on usbus1 > >>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > >>>>> ugen0.1: <Generic EHCI root HUB> at usbus0 > >>>>> uhub3 on usbus0 > >>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > >>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5 > >>>>> uhub4 on usbus5 > >>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 > >>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4 > >>>>> uhub5 on usbus4 > >>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 > >>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block > >>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0 > >>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0 > >>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0 > >>>>> Release APs...done > >>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 > >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> > >>>>> Instruction Set Attributes 1 = <> > >>>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> > >>>>> Processor Features 1 = <> > >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>>>> Memory Model Features 1 = <8bit VMID> > >>>>> Memory Model Features 2 = <32bit CCIDX,48bit VA> > >>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... > >>>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> > >>>>> Debug Features 1 = <> > >>>>> Auxiliary Features 0 = <> > >>>>> Auxiliary Features 1 = <> > >>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 > >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 > >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 > >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > >>>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 > >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> > >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> > >>>>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 > >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> > >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> > >>>>> WARNING: WITNESS option enabled, expect reduced performance. > >>>>> Unresolved linked clock found: clkin_gmac > >>>>> uhub0: 1 port with 1 removable, self powered > >>>>> uhub2: 1 port with 1 removable, self powered > >>>>> Warning: no time-of-day clock registered, system time will not be set accurately > >>>>> uhub4: 2 ports with 2 removable, self powered > >>>>> uhub5: 2 ports with 2 removable, self powered > >>>>> uhub3: 1 port with 1 removable, self powered > >>>>> uhub1: 1 port with 1 removable, self powered > >>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339. > >>>>> Setting hostid: 0x5d4b60f9. > >>>>> Starting file system checks: > >>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS > >>>>> /dev/mmcsd0p3: clean, 27264816 free (352 frags, 3408058 blocks, 0.0% fragmentation) > >>>>> lock order reversal: > >>>>> 1st 0xffffa00062dabbe0 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724 > >>>>> 2nd 0xffffa00062c9ddc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918 > >>>>> lock order devfs -> ufs established at: > >>>>> #0 0xffff000000569234 at witness_checkorder+0x448 > >>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 > >>>>> #2 0xffff00000075ad38 at ffs_lock+0x64 > >>>>> #3 0xffff0000005ed57c at _vn_lock+0x54 > >>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8 > >>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4 > >>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c > >>>>> #7 0xffff0000005d3564 at parse_mount+0x49c > >>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc > >>>>> #9 0xffff00000048dc68 at start_init+0x24 > >>>>> #10 0xffff0000004b7474 at fork_exit+0x7c > >>>>> lock order ufs -> devfs attempted at: > >>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54 > >>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50 > >>>>> #2 0xffff0000005ed57c at _vn_lock+0x54 > >>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c > >>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0 > >>>>> #5 0xffff0000003b12c0 at devfs_root+0x44 > >>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 > >>>>> #7 0xffff0000005d89b0 at vflush+0x5c > >>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34 > >>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c > >>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8 > >>>>> #11 0xffff000000812d0c at do_el0_sync+0x454 > >>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90 > >>>>> Mounting local filesystems:. > >>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat > >>>>> Setting hostname: kazu.tfc. > >>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 > >>>>> ukbd0 on uhub2 > >>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1 > >>>>> kbd1 at ukbd0 > >>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > >>>>> Feeding entropy: . > >>>>> lo0: link state changed to UP > >>>>> Starting Network: lo0. > >>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > >>>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> > >>>>> inet6 ::1 prefixlen 128 > >>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > >>>>> inet 127.0.0.1 netmask 0xff000000 > >>>>> groups: lo > >>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > >>>>> Starting devd. > >>>>> Autoloading module: mx25l.ko > >>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 > >>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K > >>>>> Autoloading module: pwm_backlight.ko > >>>>> link_elf: symbol backlight_get_info_desc undefined > >>>>> kldload: can't load pwm_backlight.ko: No such file or directory > >>>>> Autoloading module: uhid.ko > >>>>> Autoloading module: wmt.ko > >>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table > >>>>> route: writing to routing socket: Network is unreachable > >>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable > >>>>> add host ::1: gateway lo0 fib 0: route already in table > >>>>> add net fe80::: gateway ::1 > >>>>> add net ff02::: gateway ::1 > >>>>> add net ::ffff:0.0.0.0: gateway ::1 > >>>>> add net ::0.0.0.0: gateway ::1 > >>>>> Updating /var/run/os-release done. > >>>>> Creating and/or trimming log files. > >>>>> Updating motd:. > >>>>> Clearing /tmp (X related). > >>>>> Starting syslogd. > >>>>> No core dumps found. > >>>>> Mounting late filesystems:. > >>>>> Security policy loaded: MAC/ntpd (mac_ntpd) > >>>>> Starting ntpd. > >>>>> Feb 3 18:00:15 kazu ntpd[1004]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 38 days ago > >>>>> Performing sanity check on sshd configuration. > >>>>> Starting sshd. > >>>>> Starting cron. > >>>>> Starting sendmail. > >>>>> Starting sendmail_msp_queue. > >>>>> Configuring vt: blanktime screensaverFeb 3 18:00:16 kazu ntpd[1004]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8) > >>>>> kldload: can't load logo_saver: No such file or directory > >>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver > >>>>> . > >>>>> Starting background file system checks in 60 seconds. > >>>>> > >>>>> Wed Feb 3 18:00:16 JST 2021 > >>>>> > >>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1) > >>>>> > >>>>> login: > >>>>> > >>>>> > >>>>> [1] https://github.com/TrueFC/ports/tree/master/sysutils/u-boot-pinebook-pro > >>>>>> the twitter thread > >>>>>> https://twitter.com/jsm22413542/status/1355896239104159748 > >>>>>> > >>>>>> Long story short I keep CPLL at 800000000 but set ACLK_VOP1 at 594000000.. > >>>>>> > >>>>>> > >>>>>> /Jsm > >>>>>> > >>>>>> _______________________________________________ > >>>>>> freebsd-arm@freebsd.org mailing list > >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >>>>>> > >>>>> --- > >>>>> Kazuhiko Kiriyama <kiri@truefc.org> > >>>> _______________________________________________ > >>>> freebsd-arm@freebsd.org mailing list > >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >>>> > >> _______________________________________________ > >> freebsd-arm@freebsd.org mailing list > >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >> > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202102090747.1197ln92039484>