Date: Fri, 12 Nov 2021 12:18:06 +0100 From: Milan Obuch <freebsd-usb@dino.sk> To: freebsd-usb@freebsd.org Subject: Re: USBDMSC emulated device does not work on FreeBSD Message-ID: <20211112121806.2db2a908@zeta.dino.sk> In-Reply-To: <972a650d-d490-1965-13a4-2fb984531f1d@selasky.org> References: <20211112095915.226af6be@zeta.dino.sk> <6a6850f5-8233-aae7-8e65-42594402fcb5@selasky.org> <20211112120714.73f195a9@zeta.dino.sk> <972a650d-d490-1965-13a4-2fb984531f1d@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 12 Nov 2021 12:11:38 +0100 Hans Petter Selasky <hps@selasky.org> wrote: > Hi, > > > kernel: ugen1.3: <Microchip Inc PolarFireSoc-FlashDrive> at usbus1 > > > > line in console (and later in dmesg). Relevant line in output of > > 'usbconfig show_ifdrv' command is > > > > ugen1.3: <Microchip Inc PolarFireSoc-FlashDrive> at usbus1, cfg=255 > > md=HOST spd=HIGH (480Mbps) pwr=ON (100mA) > > cfg=255 means something very low level USB failed. It was not able to > set the configuration number. > > Try: > > usbconfig -d ugen1.3 set_config 0 > > --HPS > I tried, basically no change (no output on console, no change in output of 'usbconfig show_ifdrv' command). Also, I tried 'usbconfig -d ugen1.3 dump_all_desc' just out of curiosity, output is ugen1.3: <Microchip Inc PolarFireSoc-FlashDrive> at usbus1, cfg=255 md=HOST spd=HIGH (480Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x1514 idProduct = 0x0001 bcdDevice = 0x3000 iManufacturer = 0x0001 <retrieving string failed> iProduct = 0x0002 <retrieving string failed> iSerialNumber = 0x0003 <retrieving string failed> bNumConfigurations = 0x0001 Regards, Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20211112121806.2db2a908>