Date: Tue, 13 Feb 2024 12:19:37 +0100 From: Milan Obuch <freebsd-hackers@dino.sk> To: freebsd-hackers@freebsd.org Subject: rcorder question Message-ID: <20240213121936.2c0fc4c0@zeta.dino.sk>
next in thread | raw e-mail | index | archive | help
Hi, I am trying to solve an issue how to start local scripts in proper order (for my application). Basically, I use net/socat port to create virtual serial port used to read data from some device (just simple character stream, with CR LF terminating the record with fixed position items). I configured socat instance in /etc/rc.conf: socat_enable="YES" and /usr/local/etc/socat-instances.conf: [moxa] daemonuser=root flags="PTY,link=/dev/cuaV0,rawer,wait-slave TCP4:192.168.x.y:5000" It works - on boot, designated device is contacted and virtual serial port is created. For starting program consuming data, I put following in /etc/rc.local: /usr/local/xxx/yyy/zzz /dev/cuaV0 & If started manually after boot up, it works as intended, but here is the problem, it is started before socat, because # rcorder /etc/rc.d/* /usr/local/etc/rc.d/* | grep local /etc/rc.d/mountcritlocal /usr/local/etc/rc.d/dbus /etc/rc.d/local /usr/local/etc/rc.d/socat (some more entries edited out, not relevant to the issue). So the question is how could I alter boot order to start /etc/rc.local *after* socat instance. I tried, altering /etc/rc.d/local line (naively) # REQUIRE: DAEMON to # REQUIRE: DAEMON socat but this does not work, because then rcorder reports rcorder: Circular dependency on file `/usr/local/etc/rc.d/socat'. rcorder: Circular dependency on provision `LOGIN': /etc/rc.d/LOGIN -> /etc/rc.d/local -> /usr/local/etc/rc.d/socat -> /etc/rc.d/LOGIN. rcorder: `/usr/local/etc/rc.d/socat' was seen in circular dependencies for 1 times. rcorder: `/etc/rc.d/local' was seen in circular dependencies for 1 times. rcorder: `/etc/rc.d/LOGIN' was seen in circular dependencies for 1 times. rcorder: `/usr/local/etc/rc.d/socat' was seen in circular dependencies for 1 times. I did some more, but no success yet... Anybody to offer some hint I can try? Regards, Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20240213121936.2c0fc4c0>