Date: Sat, 01 May 2021 18:37:42 -0500 From: Greg Rivers <gcr+freebsd-current@tharned.org> To: Stefan Esser <se@freebsd.org> Cc: FreeBSD CURRENT <freebsd-current@freebsd.org> Subject: Re: Problems with realtek NIC Message-ID: <2191438.sMrx5ctUpN@no.place.like.home> In-Reply-To: <a549a53f-5ad7-314b-44f4-44c74f6d2c54@freebsd.org> References: <202105011909.141J9kQ4068083@server.i805.com.br> <2429724.0dHE6SNnxz@no.place.like.home> <a549a53f-5ad7-314b-44f4-44c74f6d2c54@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Saturday, 1 May 2021 16:45:03 CDT Stefan Esser wrote:
> Am 01.05.21 um 21:48 schrieb Greg Rivers via freebsd-current:
> > On Saturday, 1 May 2021 14:09:46 CDT Nilton Jose Rizzo wrote:
> >> I using a FreeBSD 14-Current and get random error with my NIC. The watchdog timer send a timeout message and I loose connection temporaly. In logs show only this message:
> >>
> > Switch to the official Realtek driver in ports: net/realtek-re-kmod
>
> The "official" RealTek driver is based on a very old version of "our"
> driver that was written by Bill Paul.
>
> It lacks many features that have been introduced in FreeBSD in the
> last decade (or even earlier) like NETMAP-Support.
>
> The RealTek-driver has special cases for some 50 variants of RealTek
> Ethernet chips and contains individual firmware patches for nearly all
> of them.
>
> I had started to merge chip specific changes from the official driver
> to the FreeBSD driver in the hope to get it to support the RTL8125A/B
> chips. But I have stopped that project for lack of RTL8125 documentation,
> especially regarding the PHY, which has its own driver module in our
> version but not the RealTek code. (And somebody claimed to know that
> another FreeBSD developer was working on RTL8125 support but did not
> tell who that might be and whether he had documentation.)
>
> Anyway, there are changes regarding the initialization and error recovery
> of different RealTek chips in the official driver that could be merged
> into our version. But I do not know whether these changes require the
> firmware changes provided by the RealTek driver to correctly work.
>
Thanks for the information Stefan, and for your work on FreeBSD. My use of the term "official" was apparently inaccurate. I was not aware of the deficiencies in the RealTek driver. I would prefer to use the FreeBSD driver, but I don't for purely pragmatic reasons: the FreeBSD driver continually locks up and resets under load (as described by the OP), while the RealTek driver does not.
FWIW, here are the particulars on the RealTek chip-set that I've got:
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xb0804000-0xb0804fff,0xb0800000-0xb0803fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
re0@pci0:1:0:0: class=0x020000 rev=0x06 hdr=0x00 vendor=0x10ec device=0x8168 subvendor=0x1458 subdevice=0xe000
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller'
class = network
subclass = ethernet
Would the FreeBSD Foundation be able to help with getting documentation from RealTek?
--
Greg
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2191438.sMrx5ctUpN>