Date: Fri, 07 May 1999 10:41:47 +0200 From: sthaug@nethelp.no To: roberto@keltia.freenix.fr Cc: scsi@FreeBSD.ORG Subject: Re: HEADS UP: CAM changes Message-ID: <26197.926066507@verdi.nethelp.no> In-Reply-To: Your message of "Fri, 7 May 1999 00:37:04 %2B0200" References: <19990507003704.A50446@keltia.freenix.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
> > NOTE: I would really like to hear from NCR owners about these changes.
> > Justin and I made a small negotiation change in the NCR driver that should
> > mean that people with 875's and the like should get Ultra speeds without
> > putting options in their kernel.
>
> For the record, I get Ultra speed w/o any problems on my 875 even without
> these changes. YMMV of course.
Same here, running a kernel somewhere between 3.0 and 3.1, and (now)
3.1-STABLE. Never had a problem with Ultra speeds for the 875.
Steinar Haug, Nethelp consulting, sthaug@nethelp.no
----------------------------------------------------------------------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #0: Sat Apr 3 10:11:35 CEST 1999
sthaug@verdi.nethelp.no:/d/freebsd/stable/src/sys/compile/VERDI_ELF
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 166193834 Hz
CPU: Pentium/P55C (166.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134217728 (131072K bytes)
avail memory = 127574016 (124584K bytes)
Preloaded elf kernel "kernel" at 0xf02d8000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439> rev 0x03 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 12 on pci0.9.0
fxp0: Ethernet address 00:a0:c9:44:a8:90
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 10 on pci0.10.0
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.11.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL009e [0x9e008c0e] Serial 0x026f274d Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP> sn 0x026f274d) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pcm0 not probed due to drq conflict with pcm1 at 1
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <IBM-DTTA-351680>, DMA, 32-bit, multi-block-16
wd0: 16124MB (33022080 sectors), 32760 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <FX240S/j01>, removable, intr, dma, iordis
acd0: drive speed 4134KB/sec, 256KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
ppc0 at 0x378 irq 7 on isa
ppc0: W83877F chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppb0: IEEE1284 device found /NIBBLE/PS2/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Lexmark International Lexmark Optra S 1255> PRINTER PCL 6 Emulation, PostScript Level 2 Emulation, NPAP, PJL
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
Waiting 3 seconds for SCSI devices to settle
sa0 at ncr0 bus 0 target 4 lun 0
sa0: <WANGTEK 51000 SCSI P633> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
changing root device to da0s1a
da0 at ncr0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?26197.926066507>