Date: Fri, 25 Jun 2004 01:16:54 -0400 From: "MAin D. ToRK" <tork@n0th1ng.spb.ru> To: freebsd-current@freebsd.org Subject: Project Evil - RTSThreshold Message-ID: <289459035.20040625011654@n0th1ng.spb.ru>
next in thread | raw e-mail | index | archive | help
Hello. << 6/25/2004
RELENG_5_2.
hardware: adm8211.
cvsup of sys/compat/ndis, sys/modules/ndis/, sys/modules/if_ndis
cvsup's been made 2 days ago.
made copy of .inf and .sys to sys/modules/if_ndis
run ndiscvt
make && make load in both sys/modules/ndis, sys/modules/if_ndis
ndis0: <802.11b Wireless PCI Card> port 0x3000-0x30ff mem 0xf4200000-0xf42003ff irq 21 at device 5.0 on pci3
can't re-use a leaf (RTSThreshold)!
ndis0: NDIS API version: 5.0
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ifconfig ndis0 inet 192.168.1.102 netmask 255.255.255.0 channel 6 ssid
"myssid" media auto
ndis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.102 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:e0:98:bd:b7:3e
media: IEEE 802.11 Wireless Ethernet autoselect
status: no carrier
ssid ""
channel -1 authmode OPEN powersavemode OFF powersavesleep 100
wepmode OFF weptxkey 1
Could a bad connection between card and antenna lead to "can't re-use a
leaf (RTSThreshold)!"?
Is this bad connection causes "status: no carrier" or because of RTS
Threshold?
Can't set SSID and get right status.
Thank you.
--
MAin D. ToRK
mail@tork.spb.ru
tork@synomatic.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?289459035.20040625011654>