Date: Sat, 28 Feb 2015 03:02:28 +0300 From: Maxim V FIlimonov <che@bein.link> To: freebsd-questions@freebsd.org Cc: Christian Baer <christian.baer@uni-dortmund.de> Subject: Re: Am I too dumb to mount an SD-card? Message-ID: <2959707.sdgvqrTRN0@quad> In-Reply-To: <9107632.xkY3nEPMJS@falbala.rz1.convenimus.net> References: <9107632.xkY3nEPMJS@falbala.rz1.convenimus.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Do you have fuse installed? If not, here's the guess: install fuse first, then run kldload fuse, then try mounting the file system. On Friday 27 February 2015 23:28:24 Christian Baer wrote: > Hey everyone! > > I decided to give a few pieces of software a spin, so that I could possibly > use FreeBSD for my photo stuff aswell. > > My problem is that I can't mount the SD-card from my camera (Pentax K-3). > It's formatted exFAT (I am guessing) by the camera. > > I stuck the card into the card reader and there is a device there for it to: > > /dev/da1 and /dev/da1s1 > > However, mounting does not work: > > mount.exfat-fuse /dev/da1s1 /mnt/sdcard/ > FUSE exfat 1.0.1 > fuse: failed to open fuse device: No such file or directory > > It seems to be there (last one): > > camcontrol devlist > <WDC WD6401AALS-00L3B2 01.03B01> at scbus0 target 0 lun 0 (ada0,pass0) > <Hitachi HDS721075KLA330 GK8OAB0A> at scbus1 target 0 lun 0 (ada1,pass1) > <Samsung SSD 840 PRO Series DXM06B0Q> at scbus2 target 0 lun 0 (ada2,pass2) > <PIONEER BD-RW BDR-209D 1.10> at scbus6 target 0 lun 0 (pass3,cd0) > <AHCI SGPIO Enclosure 1.00 0001> at scbus8 target 0 lun 0 (pass4,ses0) > <Generic- Compact Flash 1.01> at scbus9 target 0 lun 0 (da0,pass5) > <Multiple Flash Reader 1.05> at scbus9 target 0 lun 1 (da1,pass6) > > And it is definately the one with something plugged in... :-) > > kernel: ugen2.3: <vendor 0x058f> at usbus2 > kernel: umass0: <vendor 0x058f product 0x6361, class 0/0, rev 2.00/1.00, > addr 2> on usbus2 > kernel: umass0: SCSI over Bulk-Only; quirks = 0x4001 > kernel: umass0:9:0:-1: Attached to scbus9 > kernel: da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 > kernel: da0: <Generic- Compact Flash 1.01> Removable Direct Access SCSI-0 > device > kernel: da0: 40.000MB/s transfers > kernel: da0: Attempt to query device size failed: NOT READY, Medium not > present > kernel: da0: quirks=0x2<NO_6_BYTE> > kernel: da1 at umass-sim0 bus 0 scbus9 target 0 lun 1 > kernel: da1: <Multiple Flash Reader 1.05> Removable Direct Access SCSI-0 > device > kernel: da1: 40.000MB/s transfers > kernel: da1: 60906MB (124735488 512 byte sectors: 255H 63S/T 7764C) > kernel: da1: quirks=0x2<NO_6_BYTE> > > In some forum I read something about having to start fusefs as a service or > loadable kernel module. However, I could not find a start script for fuse > after installing it nor could I find a klm. > > What piece of the puzzle am I missing (again)? > > Y'all have a good night! :-) > Chris > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- wbr, Maxim Filimonov che@bein.link
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2959707.sdgvqrTRN0>