Date: Mon, 3 Feb 2014 20:59:07 -0800 From: Tim Kientzle <tim@kientzle.com> To: Warner Losh <imp@bsdimp.com> Cc: freebsd-arm <freebsd-arm@freebsd.org>, Bernd Walter <ticso@cicely7.cicely.de>, ticso@cicely.de, Ian Lepore <ian@freebsd.org> Subject: Re: wandboard / imx6 / exynos4 / cortex-a9 "wrong-endian bug" fixed Message-ID: <2BDF104B-16DE-4488-9870-148843D8CC2F@kientzle.com> In-Reply-To: <1584FD9C-581F-4BCF-8153-E381693887DB@bsdimp.com> References: <1391371204.13026.43.camel@revolution.hippie.lan> <20140202230450.GA42331@cicely7.cicely.de> <CAB3ij4AjkrMfF2YLrjTE5vZx25XT%2B2iTSghKG=kh8iu==XeZ2w@mail.gmail.com> <1391395062.13026.69.camel@revolution.hippie.lan> <1584FD9C-581F-4BCF-8153-E381693887DB@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Feb 2, 2014, at 6:59 PM, Warner Losh <imp@bsdimp.com> wrote: >=20 > On Feb 2, 2014, at 7:37 PM, Ian Lepore wrote: >=20 >> On Sun, 2014-02-02 at 18:25 -0700, Tom Everett wrote: >>> I can confirm that a crochet image for Wandboard no longer crashes = after >>> this fix. It doesn't mount the FS yet, but that's a known issue, = noted >>> here: >>>=20 >>> https://github.com/kientzle/crochet-freebsd/issues/29 >>=20 >> That thread mentions needing to build a u-boot for wandboard. Here's = a >> patchset for doing that. Apply this in your ports/sysutils dir, = using: >>=20 >> patch -p0 <u-boot-wandboard.diff >>=20 >> This was copied from Tim's beaglebone work and changed a bit for >> wandboard. =20 >>=20 >> I've been meaning to ask about how we should handle this. Do we want = a >> u-boot port for every board, or is there some way to parameterize a >> single port so that it applies the right set of patches, or what? = I'm >> not very savvy about ports. >=20 > Usually there's a master port, and slave ports that parameterize. When = we talked about this at BSDcan, I believe that was the model that was = suggested for this problem.. Does that work when there=92s a different source distro for many of the ports? (Not to mention different patches for each one.) Tim P.S. I started a U-Boot port for BeagleBone but my time has evaporated. If anyone wants to take that over and extend it for other boards, step right up=85
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2BDF104B-16DE-4488-9870-148843D8CC2F>