Date: Fri, 26 Jun 2009 17:25:29 -0700 From: Jack Vogel <jfvogel@gmail.com> To: Mark Atkinson <atkin901@yahoo.com> Cc: freebsd-net@freebsd.org Subject: Re: Regression: em driver in -CURRENT, "Invalid MAC address" Message-ID: <2a41acea0906261725x57e6903br9f3f42b55f3a3d30@mail.gmail.com> In-Reply-To: <h234fa$cob$1@ger.gmane.org> References: <gthe3t$822$1@ger.gmane.org> <2a41acea0905020803s63b69b1awb39538f000f5bd5a@mail.gmail.com> <h234fa$cob$1@ger.gmane.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Oh, hmmm, so this card is completely broken with the new driver then? What was the last working version you used? Jack On Fri, Jun 26, 2009 at 11:36 AM, Mark Atkinson <atkin901@yahoo.com> wrote: > Jack Vogel wrote: > > > I'm willing to bet that its in fact the same problem that VMWare is > > having. Our method of getting the mac address changed, and the emulations > > seem to be unprepared for it. > > > > This was done for a real customer requirement to allow support of > > alternate mac addressing in firmware. What happens now is a warm reset of > > the hardware is done, followed by reading the RAR[0] register. In a real > > Intel NIC the mac > > address will be valid in that register, but in VMWare, and I'm willing to > > bet in > > VirtualBox as well, its 0. > > > > VMWare also has 3 choices of device (wow, amazing coincidence :), can > > you tell me when you pick e1000 what real adapter it claims to emulate? > > > > I am considering options for this problem. The one I lean toward right > now > > is to make a "legacy" em driver, it will have support for ONLY pre-PCI > > Express > > hardware, it will be frozen as it were, the idea is that with no new work > > on it > > it will not suffer from any regression type failures. If I do this, there > > are some > > strategy issues, and its those I'm thinking about. > > > > In any case, I intend to have this problem resolved for 8's release. Stay > > tuned. > > Just FYI. this is a real machine with real cards. Older fiber cards. > > em0: <Intel(R) PRO/1000 Network Connection 6.9.14> mem > 0xdb000000-0xdb01ffff > irq 28 at device 4.0 on pci19 > em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdb000000 > em0: Invalid MAC address > device_attach: em0 attach returned 5 > em1: <Intel(R) PRO/1000 Network Connection 6.9.14> mem > 0xdb020000-0xdb03ffff > irq 29 at device 9.0 on pci19 > em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdb020000 > em1: Invalid MAC address > device_attach: em1 attach returned 5 > > > $ pciconf -v -l |grep -A4 -e "^em" > em0@pci0:19:4:0: class=0x020000 card=0x10008086 chip=0x10008086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82542 Gigabit Ethernet Controller' > class = network > subclass = ethernet > em1@pci0:19:9:0: class=0x020000 card=0x10008086 chip=0x10008086 > rev=0x03 hdr=0x00 > vendor = 'Intel Corporation' > device = '82542 Gigabit Ethernet Controller' > class = network > subclass = ethernet > > > > -- > Mark Atkinson > atkin901@yahoo.com > (!wired)?(coffee++):(wired); > > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2a41acea0906261725x57e6903br9f3f42b55f3a3d30>