Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 15 Feb 2007 00:54:38 -0800
From:      "Neeraj Sharma" <neeraj.dl@gmail.com>
To:        "Christian Walther" <cptsalek@gmail.com>,  "Abdullah Ibn Hamad Al-Marri" <almarrie@gmail.com>,  freebsd-questions@freebsd.org
Subject:   Re: Xorg on FreeBSD does not work
Message-ID:  <2b5834fa0702150054r33e4be56xd93c3e1ba0fad3d5@mail.gmail.com>
In-Reply-To: <14989d6e0702150010v799dc698n93e2ac003e8d77bd@mail.gmail.com>
References:  <2b5834fa0702142114v5e2d37b0t30eef03c892b9819@mail.gmail.com> <499c70c0702142202m74264384k3d36bd70e326a961@mail.gmail.com> <14989d6e0702150010v799dc698n93e2ac003e8d77bd@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
I tried copying my xorg.conf from Ubuntu (which automatically probes
everything and creates a xorg.conf) and tried to use on FreeBSD. But still
it hangs... I wonder if its because some drivers are missing in FreeBSD for
my monitor. My laptop has ATI Radeon 9000IGP in case that rings a bell to
someone in the same situation as me b4.
Here is xorg.conf from my Ubuntu Install
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   sudo sh -c 'md5sum /etc/X11/xorg.conf
>/var/lib/xfree86/xorg.conf.md5sum'
#   sudo dpkg-reconfigure xserver-xorg

Section "Files"
    FontPath    "unix/:7100"            # local font server
    # if the local font server has problems, we can fall back on these
    FontPath    "/usr/lib/X11/fonts/misc"
    FontPath    "/usr/lib/X11/fonts/cyrillic"
    FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/lib/X11/fonts/Type1"
    FontPath    "/usr/lib/X11/fonts/CID"
    FontPath    "/usr/lib/X11/fonts/100dpi"
    FontPath    "/usr/lib/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "bitmap"
    Load    "dbe"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "record"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "keyboard"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc104"
    Option        "XkbLayout"    "us"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection
Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option        "HorizScrollDelta"    "0"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon Mobility 9100 U3 (R200
IGP)"
    Driver        "ati"
    BusID        "PCI:1:5:0"
EndSection

Section "Monitor"
    Identifier    "Generic Monitor"
    Option        "DPMS"
    Modeline    "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies, Inc. Radeon Mobility 9100 U3 (R200
IGP)"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x800"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "DRI"
    Mode    0666
EndSection


Thanks for the help!

Neeraj


On 2/15/07, Christian Walther <cptsalek@gmail.com> wrote:
>
> On 15/02/07, Abdullah Ibn Hamad Al-Marri <almarrie@gmail.com> wrote:
> > On 2/15/07, Neeraj Sharma <neeraj.dl@gmail.com> wrote:
> > > I am a newbie to FreeBSD world. I am trying to install FreeBSD6.2 on
> my HP
> > > zv5240us laptop. Everything else went off fine except the X config. I
> ran
> > > the command X -configure which created a xorg.conf.new file. When I
> use that
> > > to run X it just shows a blank screen and I am not able to go back to
> the
> > > console also.
> > >
> > > I tried playing around with the parameters in xorg.conf.new file but
> without
> > > success. If anyone can help me with this it will be great...
> > >
> > > --
> > > Thanks & Regards,
> > > Neeraj Sharma
> >
> > That is alright to show you xorg works or not.
>
> Yes, a blank screen and a locked keyboard is a perfect description of
> an X configuration that isn't working. ;-)
>
> >
> > After doing that press ctrl+alt+backspace
> >
> > Then #cp /root/xorg.conf.new /etc/X11/xorg.conf then type startx or
> > reboot your notebook.
>
> Sorry for correcting, but this is not adviseable at this point. His X
> isn't working obviously, so installing xorg.conf into the right place
> would lead to more problems, without solving anything.
> He can do so when the X configuration is working.
>
> >
> > --
> > Regards,
> >
> > -Abdullah Ibn Hamad Al-Marri
> > Arab Portal
> > http://www.WeArab.Net/
>
> Regards
> Christian
>



-- 
Thanks & Regards,
Neeraj Sharma



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2b5834fa0702150054r33e4be56xd93c3e1ba0fad3d5>