Date: Thu, 13 Nov 2008 13:29:11 +0100 From: VeeJay <maanjee@gmail.com> To: bseklecki@collaborativefusion.com Cc: FreeBSD-Questions <freebsd-questions@freebsd.org> Subject: Re: Any help about FreeBSD & Dell's Troubleshooting Tool DSET Message-ID: <2cd0a0da0811130429s2dff46cam5b2bd0c214eed56a@mail.gmail.com> In-Reply-To: <2cd0a0da0811130049q2debb60esb12f47b2aa514409@mail.gmail.com> References: <2cd0a0da0811120701r7c57bd6btf7640440dbb11035@mail.gmail.com> <1226503559.27892.177.camel@soundwave.ws.pitbpa0.priv.collaborativefusion.com> <2cd0a0da0811121039m1f05643eh939ed4fd8f6f076d@mail.gmail.com> <1226519743.27892.193.camel@soundwave.ws.pitbpa0.priv.collaborativefusion.com> <2cd0a0da0811130049q2debb60esb12f47b2aa514409@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
If it looks healthy, why there are these errors on the screen? Is it controller problem or disk? Regards VJ On Thu, Nov 13, 2008 at 9:49 AM, VeeJay <maanjee@gmail.com> wrote: > Hi Guys > > I am running RAID 10. > > Here is the dmesg output: > > $ dmesg > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-PRERELEASE #0: Fri Aug 29 13:42:13 CEST 2008 > veejay@server3.03:/usr/src/sys/amd64/compile/KERNEL > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz (2995.54-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0xce3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 4 > usable memory = 17166688256 (16371 MB) > avail memory = 16619601920 (15849 MB) > ACPI APIC Table: <DELL PE_SC3 > > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > cpu4 (AP): APIC ID: 4 > cpu5 (AP): APIC ID: 5 > cpu6 (AP): APIC ID: 6 > cpu7 (AP): APIC ID: 7 > ioapic0: Changing APIC ID to 8 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <DELL PE_SC3> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci4: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4 > pci5: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > pci6: <ACPI PCI bus> on pcib3 > pcib4: <PCI-PCI bridge> at device 0.0 on pci6 > pci7: <PCI bus> on pcib4 > bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem > 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci7 > miibus0: <MII bus> on bce0 > brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce0: Ethernet address: 00:1e:c9:d5:88:f0 > bce0: [ITHREAD] > bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W > (0x04000305); Flags( MFW MSI ) > pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5 > pci8: <ACPI PCI bus> on pcib5 > pcib6: <PCI-PCI bridge> at device 0.3 on pci4 > pci9: <PCI bus> on pcib6 > pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci1: <ACPI PCI bus> on pcib7 > mfi0: <Dell PERC 6> port 0xec00-0xecff mem > 0xfc680000-0xfc6bffff,0xfc640000-0xfc67ffff irq 16 at device 0.0 on pci1 > mfi0: Megaraid SAS driver Ver 2.00 > mfi0: 2145 (279883150s/0x0020/info) - Shutdown command received from host > mfi0: 2146 (boot + 3s/0x0020/info) - Firmware initialization started (PCI > ID 0060/1000/1f0c/1028) > mfi0: 2147 (boot + 3s/0x0020/info) - Firmware version 1.11.52-0396 > mfi0: 2148 (boot + 3s/0x0008/info) - Battery Present > mfi0: 2149 (boot + 3s/0x0020/info) - Package version 6.0.2-0002 > mfi0: 2150 (boot + 21s/0x0004/info) - Enclosure (SES) discovered on PD 20(c > None/p0) > mfi0: 2151 (boot + 21s/0x0002/info) - Inserted: Encl PD 20 > mfi0: 2152 (boot + 21s/0x0002/info) - Inserted: PD 20(c None/p0) Info: > enclPd=20, scsiType=d, portMap=09, sasAddr=5001e0f03d0c6f00,0000000000000000 > mfi0: 2153 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0) > mfi0: 2154 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: > enclPd=20, scsiType=0, portMap=00, sasAddr=5000cca00904b705,0000000000000000 > mfi0: 2155 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1) > mfi0: 2156 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: > enclPd=20, scsiType=0, portMap=01, sasAddr=5000cca009024231,0000000000000000 > mfi0: 2157 (boot + 21s/0x0002/info) - Inserted: PD 02(e0x20/s2) > mfi0: 2158 (boot + 21s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: > enclPd=20, scsiType=0, portMap=02, sasAddr=5000cca00904d92d,0000000000000000 > mfi0: 2159 (boot + 21s/0x0002/info) - Inserted: PD 03(e0x20/s3) > mfi0: 2160 (boot + 21s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: > enclPd=20, scsiType=0, portMap=03, sasAddr=5000cca009048865,0000000000000000 > mfi0: 2161 (boot + 21s/0x0002/info) - Inserted: PD 04(e0x20/s4) > mfi0: 2162 (boot + 21s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: > enclPd=20, scsiType=0, portMap=04, sasAddr=5000cca009048d2d,0000000000000000 > mfi0: 2163 (boot + 21s/0x0002/info) - Inserted: PD 05(e0x20/s5) > mfi0: 2164 (boot + 21s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: > enclPd=20, scsiType=0, portMap=05, sasAddr=5000cca009048f31,0000000000000000 > mfi0: 2165 (279879506s/0x0020/info) - Time established as 11/13/08 > 8:18:26; (26 seconds since power on) > mfi0: 2166 (279879548s/0x0008/info) - Battery temperature is normal > mfi0: [ITHREAD] > pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci10: <ACPI PCI bus> on pcib8 > pcib9: <PCI-PCI bridge> at device 5.0 on pci0 > pci11: <PCI bus> on pcib9 > pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci12: <ACPI PCI bus> on pcib10 > em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0xdce0-0xdcff mem > 0xfc3e0000-0xfc3fffff,0xfc3c0000-0xfc3dffff irq 16 at device 0.0 on pci12 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:15:17:8f:f5:0f > pcib11: <PCI-PCI bridge> at device 7.0 on pci0 > pci13: <PCI bus> on pcib11 > pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib12 > pcib13: <PCI-PCI bridge> at device 0.0 on pci2 > pci3: <PCI bus> on pcib13 > bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem > 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3 > miibus1: <MII bus> on bce1 > brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce1: Ethernet address: 00:1e:c9:d5:88:ee > bce1: [ITHREAD] > bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W > (0x04000305); Flags( MFW MSI ) > uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xbce0-0xbcff > irq 21 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xbcc0-0xbcdf > irq 20 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xbca0-0xbcbf > irq 21 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xbc80-0xbc9f > irq 20 at device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3 > usb3: USB revision 1.0 > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc700000-0xfc7003ff irq 21 > at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 63XXESB USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 8 ports with 8 removable, self powered > uhub5: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2> on > uhub4 > uhub5: multiple transaction translators > uhub5: 2 ports with 2 removable, self powered > ukbd0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5 > kbd2 at ukbd0 > ums0: <Dell DRAC5, class 0/0, rev 1.10/0.00, addr 3> on uhub5 > ums0: X report 0x0002 not supported > device_attach: ums0 attach returned 6 > uhub6: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 4> on > uhub4 > uhub6: multiple transaction translators > uhub6: 4 ports with 4 removable, self powered > pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci14: <ACPI PCI bus> on pcib14 > vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem > 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci14 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel 63XXESB2 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > ata1: <ATA channel 1> on atapci0 > ata1: [ITHREAD] > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est2 attach returned 6 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > cpu4: <ACPI CPU> on acpi0 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est4 attach returned 6 > p4tcc4: <CPU Frequency Thermal Control> on cpu4 > cpu5: <ACPI CPU> on acpi0 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est5 attach returned 6 > p4tcc5: <CPU Frequency Thermal Control> on cpu5 > cpu6: <ACPI CPU> on acpi0 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est6 attach returned 6 > p4tcc6: <CPU Frequency Thermal Control> on cpu6 > cpu7: <ACPI CPU> on acpi0 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 91d091d0600091d > device_attach: est7 attach returned 6 > p4tcc7: <CPU Frequency Thermal Control> on cpu7 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > sio1: [FILTER] > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acd0: DVDROM <TEAC DVD-ROM DV28EV/D.AE <http://d.ae/>>; at ata0-master > UDMA33 > mfi0: 2167 (279879548s/0x0008/info) - Current capacity of the battery is > above threshold > mfid0: <MFI Logical Disk> on mfi0 > mfid0: 1286016MB (2633760768 sectors) RAID volume '' is optimal > SMP: AP CPU #3 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #7 Launched! > SMP: AP CPU #5 Launched! > Trying to mount root from ufs:/dev/mfid0s1a > WARNING: reducing size to maximum of 67108864 blocks per swap unit > em0: link state changed to UP > > > > -- > Thanks! > > BR / vj > -- Thanks! BR / vj
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2cd0a0da0811130429s2dff46cam5b2bd0c214eed56a>