Date: Fri, 29 Oct 1999 11:57:08 +0100 From: Bob Bishop <rb@gid.co.uk> To: current@freebsd.org Subject: Current kernel locks up during boot Message-ID: <3.0.6.32.19991029115708.0079b380@192.168.255.1>
next in thread | raw e-mail | index | archive | help
Hi,
-current kernels from the past 48hrs or so lock up during boot on my SMP
box, as in:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #50: Tue Oct 26 13:53:14 BST 1999
rb@bludnok:/source/cleansrc/sys/compile/BLUDNOK_MP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (349.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping = 1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126148608 (123192K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel.old" at 0xc03cb000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 7.1 on pci0
chip1: <UHCI USB controller> irq 11 at device 7.2 on pci0
Timecounter "PIIX" frequency 3579545 Hz
chip2: <Intel 82371AB Power management controller> at device 7.3 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 16 at device 8.0 on pci0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
vga-pci0: <S3 ViRGE DX/GX graphics accelerator> irq 19 at device 11.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <QUANTUM FIREBALL_TM1280A>
wd0: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
...and there it freezes. Total lockup, reset button or power cycle only.
Apparently it's barfing either on one of the PCI netcard probes, or trying
to initialise ed0 which on an older kernel probes as:
ed0 at port 0x300-0x31f iomem 0xd8000 irq 10 on isa0
ed0: address 00:20:18:72:97:67, type NE2000 (16 bit)
Any ideas?
--
Bob Bishop +44 118 977 4017
rb@gid.co.uk fax +44 118 989 4254 (0800-1800 UK)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.6.32.19991029115708.0079b380>