Date: Sat, 1 Sep 2007 18:12:58 +0400 From: Denis <piloyder@gmail.com> To: freebsd-acpi@freebsd.org Subject: ACPI error on Compaq nc6220, FreeBSD 7.0 Message-ID: <325305250709010712n4bd0d62l9a144572441cf3dc@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I use FreeBSD 7.0 (FreeBSD MY.LAPTOP 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Sat Sep 1 18:26:32 MSD 2007 root@MY.LAPTOP:/usr/obj/usr/src/sys/GENERIC i386) on my laptop - Compaq nc6220. And when I boot with ACPI enable after short period of time (about 0-3 minutes) I get next error on the console 0 (this message doesn't save in the log, I made photo and type from it): --- ACPI Exception (utmutex-0376): AE_TIME, Thread 27 could not acquire Mutex [0] [20070320] ACPI Error (exutils-0180): Could not acquire AML Interpreter mutex [20070320] ACPI Error (utmutex-0421): Mutex[0] is not acquired, cannot release [20070320] ACPI Error (exutils-0250): Could not acquire AML Interpreter mutex [20070320] ACPI Exception (utmutex-0376): AE_TIME, Thread 27 could not acquire Mutex [0] [20070320] ACPI Error (exutils-0180): Could not acquire AML Interpreter mutex [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\_TZ_.C265] (Node 0xc2e3fbe0), AE_TIME ACPI Error (psparse-0626): Method parse/execution failed [\_TZ_.TZ1_._TMP] (Node 0xc2e43920), AE_TIME acpi_tz0: error fetching current temperature -- AE_TIME ACPI Error (utmutex-0421): Mutex[0] is not acquired, cannot release [20070320] ACPI Error (exutils-0250): Could not acquire AML Interpreter mutex [20070320] --- After this error I cannot continue to work, the only way to reboot - to switch power off. Without ACPI it works fine. FreeBSD 6.2 on this laptop with ACPI enabled works almost fine - I do not have such error (almost means that sometimes computer gets overheated - cpu fun doesn't start. http://lists.freebsd.org/pipermail/freebsd-acpi/2007-June/003818.html) dmesg(8) with verbose booting with and without ACPI is in attach. ASL is here http://piloyder.googlepages.com/compaq_nc6220_freebsd_7.0.asl sysctl hw.acpi: --- hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 1 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 2 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 52.0C hw.acpi.thermal.tz0.active: 3 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 100.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 105.0C hw.acpi.thermal.tz0._ACx: 80.0C 70.0C 58.0C 35.0C -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1.temperature: 37.0C hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.passive_cooling: 0 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: -1 hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 103.0C hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz2.temperature: 28.8C hw.acpi.thermal.tz2.active: -1 hw.acpi.thermal.tz2.passive_cooling: 0 hw.acpi.thermal.tz2.thermal_flags: 0 hw.acpi.thermal.tz2._PSV: 60.0C hw.acpi.thermal.tz2._HOT: -1 hw.acpi.thermal.tz2._CRT: 105.0C hw.acpi.thermal.tz2._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 --- Is it possible to fix this error? Many-many thanks in advance! Best regards, Denis [-- Attachment #2 --] Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #0: Sat Sep 1 18:26:32 MSD 2007 root@EERUL8728008.EE.INTERBREW.NET:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0df5000. Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0df51f8. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0df52a4. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0df5350. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0df53fc. Calibrating clock(s) ... i8254 clock: 1193222 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1729181538 Hz CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 528285696 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000001eeb0fff, 501780480 bytes (122505 pages) avail memory = 503017472 (479 MB) Table 'FACP' at 0x1f7efc00 Table 'APIC' at 0x1f7efcb8 MADT: Found table at 0x1f7efcb8 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) ACPI APIC Table: <HP 0944 > bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x322 pnpbios: Found PnP BIOS data at 0xc00f4a70 pnpbios: Entry = f0000:4a9e Rev = 1.0 pnpbios: Event flag at f4a96 pnpbios: OEM ID 8a303c10 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 ACPI: RSDP @ 0x0xfe270/0x0014 (v 0 HP ) ACPI: RSDT @ 0x0x1f7efc84/0x0034 (v 1 HP 0944 0x24100520 HP 0x00000001) ACPI: FACP @ 0x0x1f7efc00/0x0084 (v 2 HP 0944 0x00000002 HP 0x00000001) ACPI: DSDT @ 0x0x1f7efd50/0x827A (v 1 HP nc6200 0x00010000 MSFT 0x0100000E) ACPI: FACS @ 0x0x1f7fae80/0x0040 ACPI: APIC @ 0x0x1f7efcb8/0x005A (v 1 HP 0944 0x00000001 HP 0x00000001) ACPI: MCFG @ 0x0x1f7efd14/0x003C (v 1 HP 0944 0x00000001 HP 0x00000001) ACPI: SSDT @ 0x0x1f7f7fca/0x0371 (v 1 HP HPQPpc 0x00001001 MSFT 0x0100000E) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> random: <entropy source, Software, Yarrow> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Sep 1 2007 18:26:02) npx0: INT 16 interface acpi0: <HP 0944> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f920 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C05C -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C06D.C1C6.C1C7 -> bus 2 dev 6 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xccd70000 pa 0x1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C003.C074 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1f700000 (3) failed ACPI timer: 1/1 1/1 1/2 1/2 1/1 1/1 1/1 1/1 1/2 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 10 11 Validation 0 11 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 10 11 Validation 0 11 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 10 11 Validation 0 11 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 10 11 Validation 0 10 N 0 10 11 After Disable 0 255 N 0 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 none Validation 0 255 N 0 none After Disable 0 255 N 0 none cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2592, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0800000, size 19, enabled map[14]: type I/O Port, range 32, base 0x5000, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled map[1c]: type Memory, range 32, base 0xd0880000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2792, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0900000, size 19, enabled found-> vendor=0x8086, dev=0x2660, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2662, revid=0x03 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2658, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x2000, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2659, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x2020, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x265a, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x2040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x265c, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0980000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2448, revid=0xd3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266e, revid=0x03 bus=0, slot=30, func=2 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2100, size 8, enabled map[14]: type I/O Port, range 32, base 0x2200, size 6, enabled map[18]: type Memory, range 32, base 0xd0981000, size 9, enabled map[1c]: type Memory, range 32, base 0xd0982000, size 8, enabled pcib0: matched entry for 0.30.INTA pcib0: slot 30 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x266d, revid=0x03 bus=0, slot=30, func=3 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled map[14]: type I/O Port, range 32, base 0x2500, size 7, enabled pcib0: matched entry for 0.30.INTB pcib0: slot 30 INTB hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2641, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266f, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x2580, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0800000-0xd087ffff,0xc0000000-0xcfffffff,0xd0880000-0xd08bffff irq 16 at device 2.0 on pci0 agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0800000 vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xd0880000 agp0: detected 7932k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xd0900000-0xd097ffff at device 2.1 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: secondary bus 16 pcib1: subordinate bus 16 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xd0000000-0xd03fffff pcib1: no prefetched decode pci16: <ACPI PCI bus> on pcib1 pci16: physical bus=16 found-> vendor=0x14e4, dev=0x167d, revid=0x11 bus=16, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xd0000000, size 16, enabled pcib1: requested memory range 0xd0000000-0xd000ffff: good pcib1: matched entry for 16.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci16:0:0: bad VPD cksum, remain 14 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0000000 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0018, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:14:c2:df:4b:3e ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 bge0: [MPSAFE] bge0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pcib2: secondary bus 32 pcib2: subordinate bus 32 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci32: <ACPI PCI bus> on pcib2 pci32: physical bus=32 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 20 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 50 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2020-0x203f irq 17 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0980000-0xd09803ff irq 20 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0980000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: wrong number of companions (4 != 3) usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 8 ports with 8 removable, self powered pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib3: secondary bus 2 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xd0400000-0xd07fffff pcib3: no prefetched decode pcib3: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib3 pci2: physical bus=2 found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=2, slot=4, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0400000, size 12, enabled pcib3: requested memory range 0xd0400000-0xd0400fff: good pcib3: matched entry for 2.4.INTA pcib3: slot 4 INTA hardwired to IRQ 21 found-> vendor=0x104c, dev=0x8031, revid=0x00 bus=2, slot=6, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0401000, size 12, enabled pcib3: requested memory range 0xd0401000-0xd0401fff: good pcib3: matched entry for 2.6.INTA pcib3: slot 6 INTA hardwired to IRQ 18 found-> vendor=0x104c, dev=0x8033, revid=0x00 bus=2, slot=6, func=3 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0402000, size 13, enabled pcib3: requested memory range 0xd0402000-0xd0403fff: good pcib3: matched entry for 2.6.INTB pcib3: slot 6 INTB hardwired to IRQ 19 found-> vendor=0x104c, dev=0x8034, revid=0x00 bus=2, slot=6, func=4 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0404000, size 8, enabled pcib3: requested memory range 0xd0404000-0xd04040ff: good map[14]: type Memory, range 32, base 0xd0405000, size 8, enabled pcib3: requested memory range 0xd0405000-0xd04050ff: good map[18]: type Memory, range 32, base 0xd0406000, size 8, enabled pcib3: requested memory range 0xd0406000-0xd04060ff: good pcib3: matched entry for 2.6.INTC pcib3: slot 6 INTC hardwired to IRQ 22 found-> vendor=0x104c, dev=0x8035, revid=0x00 bus=2, slot=6, func=5 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0407000, size 12, enabled pcib3: requested memory range 0xd0407000-0xd0407fff: good map[14]: type Memory, range 32, base 0xd0408000, size 12, enabled pcib3: requested memory range 0xd0408000-0xd0408fff: good map[18]: type Memory, range 32, base 0xd0409000, size 12, enabled pcib3: requested memory range 0xd0409000-0xd0409fff: good map[1c]: type Memory, range 32, base 0xd040a000, size 12, enabled pcib3: requested memory range 0xd040a000-0xd040afff: good pcib3: matched entry for 2.6.INTA pcib3: slot 6 INTA hardwired to IRQ 18 iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0400000-0xd0400fff irq 21 at device 4.0 on pci2 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0400000 iwi0: bpf attached iwi0: Ethernet address: 00:15:00:3a:f8:2a iwi0: bpf attached iwi0: bpf attached ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53 iwi0: [MPSAFE] iwi0: [ITHREAD] iwi0: auto rates: iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0401000-0xd0401fff irq 18 at device 6.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0401000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x8031104c 0x02100007 0x06070000 0x00824010 0x10: 0xd0401000 0x020000a0 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440112 0x40: 0x0944103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08441060 0x00000000 0x00070000 0x01111b22 0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci2: <mass storage> at device 6.3 (no driver attached) pci2: <base peripheral> at device 6.4 (no driver attached) pci2: <simple comms> at device 6.5 (no driver attached) pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0981000-0xd09811ff,0xd0982000-0xd09820ff irq 21 at device 30.2 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xd0981000 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xd0982000 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1ec94000, 4000; 0xd4c3d000 -> 1ec94000 pcm0: sndbuf_setmap 1ec9c000, 4000; 0xd4c41000 -> 1ec9c000 pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2580-0x258f irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2580 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55 ata1: [MPSAFE] ata1: [ITHREAD] battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0x4e01 0x4e11 0x4e01 0x4e01 sio0: irq maps: 0x4e01 0x4e11 0x4e01 0x4e01 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58 sio0: [FILTER] sio1: irq maps: 0x4e01 0x4e09 0x4e01 0x4e01 sio1: irq maps: 0x4e01 0x4e09 0x4e01 0x4e01 sio1: <Generic IRDA-compatible device> port 0x3e8-0x3ef,0x100-0x10f irq 3 drq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 59 sio1: [FILTER] unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd2fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 60 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub1 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66506984 hz Timecounter "TSC" frequency 1729181538 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. acpi_tz0: _AC3: temperature 78.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 78.0 >= setpoint 55.0 acpi_tz0: _AC1: temperature 78.0 >= setpoint 65.0 acpi_tz0: _AC0: temperature 78.0 >= setpoint 75.0 acpi_tz0: switched from NONE to _AC0: 78.0C ata0-slave: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C006.C0CF -> bus 0 dev 28 func 0 battery0: battery initialization start battery1: battery initialization start ad0: setting PIO4 on ICH6 chip ad0: setting UDMA100 on ICH6 chip ad0: 57231MB <WDC WD600VE-00HDT0 09.07D09> at ata0-master UDMA100 ad0: 117210240 sectors [124032C/15H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 battery0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_tz0: _AC3: temperature 78.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 78.0 >= setpoint 55.0 acpi_tz0: _AC1: temperature 78.0 >= setpoint 65.0 acpi_tz0: _AC3: temperature 78.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 78.0 >= setpoint 55.0 acpi_tz0: _AC1: temperature 78.0 >= setpoint 65.0 acpi_tz0: switched from _AC0 to _AC1: 78.0C acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.C002.C0DE.C0DF -> bus 0 dev 28 func 1 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed acd0: setting PIO4 on ICH6 chip acd0: <UJDA765aDVD/CDRW/1.02> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm data disc pcm0: measured ac97 link rate at 48005 Hz, will use 48000 Hz ATA PseudoRAID loaded WARNING: WITNESS option enabled, expect reduced performance. GEOM_LABEL: Label for provider acd0 is iso9660/styabap. Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init acpi_tz0: _AC3: temperature 75.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 75.0 >= setpoint 55.0 acpi_tz0: _AC3: temperature 70.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 70.0 >= setpoint 55.0 ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled Linux ELF exec handler installed acpi_tz0: _AC3: temperature 69.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 69.0 >= setpoint 55.0 acpi_tz0: _AC3: temperature 72.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 72.0 >= setpoint 55.0 acpi_tz0: _AC3: temperature 68.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 68.0 >= setpoint 55.0 battery1: battery initialization failed, giving up acpi_tz0: _AC3: temperature 67.0 >= setpoint 35.0 acpi_tz0: _AC2: temperature 67.0 >= setpoint 55.0 [-- Attachment #3 --] Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #0: Sat Sep 1 18:26:32 MSD 2007 root@EERUL8728008.EE.INTERBREW.NET:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 528285696 (503 MB) avail memory = 503037952 (479 MB) kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6120d2606000d26 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0800000-0xd087ffff,0xc0000000-0xcfffffff,0xd0880000-0xd08bffff irq 10 at device 2.0 on pci0 agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xd0900000-0xd097ffff at device 2.1 on pci0 pcib1: <PCI-PCI bridge> irq 10 at device 28.0 on pci0 pci16: <PCI bus> on pcib1 pci16:0:0: bad VPD cksum, remain 14 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 10 at device 0.0 on pci16 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:14:c2:df:4b:3e bge0: [ITHREAD] pcib2: <PCI-PCI bridge> at device 28.1 on pci0 pci32: <PCI bus> on pcib2 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 10 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2020-0x203f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2040-0x205f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0980000-0xd09803ff irq 10 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: wrong number of companions (4 != 3) usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 8 ports with 8 removable, self powered pcib3: <PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib3 iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0400000-0xd0400fff irq 11 at device 4.0 on pci2 iwi0: Ethernet address: 00:15:00:3a:f8:2a iwi0: [ITHREAD] cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0401000-0xd0401fff irq 11 at device 6.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] pci2: <mass storage> at device 6.3 (no driver attached) pci2: <base peripheral> at device 6.4 (no driver attached) pci2: <simple comms> at device 6.5 (no driver attached) pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0981000-0xd09811ff,0xd0982000-0xd09820ff irq 11 at device 30.2 on pci0 pcm0: [ITHREAD] pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2580-0x258f irq 10 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd2fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) sio4: <16550 or compatible> at port 0x3e8-0x3ef,0x300-0x30f irq 3 drq 3 pnpid SMCf010 on isa0 sio4: type 16550A sio4: [FILTER] unknown: <PNP0c02> can't assign resources (memory) ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1729181898 Hz quality 800 Timecounters tick every 1.000 msec ad0: 57231MB <WDC WD600VE-00HDT0 09.07D09> at ata0-master UDMA100 acd0: CDRW <UJDA765aDVD/CDRW/1.02> at ata0-slave PIO4 WARNING: WITNESS option enabled, expect reduced performance. GEOM_LABEL: Label for provider acd0 is iso9660/styabap. Trying to mount root from ufs:/dev/ad0s3a WARNING: / was not properly dismounted ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled drm0: <Intel i915GM> on vgapci0 info: [drm] AGP at 0xc0000000 256MB info: [drm] Initialized i915 1.5.0 20060119 drm0: [ITHREAD] bge0: link state changed to UP calcru: runtime went backwards from 1081 usec to 1066 usec for pid 0 (swapper) TCP: [69.64.6.22]:80 to [192.168.1.2]:49366 tcpflags 0x18<PUSH,ACK>; tcp_do_segment: FIN_WAIT_1: Received data after socket was closed, sending RST and removing tcpcb Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...6 4 3 0 0 done All buffers synced. Uptime: 9m21s Rebooting... Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #0: Sat Sep 1 18:26:32 MSD 2007 root@EERUL8728008.EE.INTERBREW.NET:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d89000. Preloaded elf module "/boot/kernel/if_iwi.ko" at 0xc0d891f8. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0d892a4. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0d89350. APIC: Could not find any APICs. Calibrating clock(s) ... i8254 clock: 1193222 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1729179705 Hz CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 528285696 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000001eeb0fff, 501780480 bytes (122505 pages) avail memory = 503037952 (479 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x322 pnpbios: Found PnP BIOS data at 0xc00f4a70 pnpbios: Entry = f0000:4a9e Rev = 1.0 pnpbios: Event flag at f4a96 pnpbios: OEM ID 8a303c10 Other BIOS signatures found: snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Sep 1 2007 18:26:02) npx0: INT 16 interface cpu0 on motherboard est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6120d2606000d26 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f920 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25908086) pcibios: BIOS version 2.10 pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2592, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0800000, size 19, enabled map[14]: type I/O Port, range 32, base 0x5000, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xc0000000, size 28, enabled map[1c]: type Memory, range 32, base 0xd0880000, size 18, enabled found-> vendor=0x8086, dev=0x2792, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0900000, size 19, enabled found-> vendor=0x8086, dev=0x2660, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2662, revid=0x03 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2658, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x2000, size 5, enabled found-> vendor=0x8086, dev=0x2659, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x2020, size 5, enabled found-> vendor=0x8086, dev=0x265a, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type I/O Port, range 32, base 0x2040, size 5, enabled found-> vendor=0x8086, dev=0x265c, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0980000, size 10, enabled found-> vendor=0x8086, dev=0x2448, revid=0xd3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266e, revid=0x03 bus=0, slot=30, func=2 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2100, size 8, enabled map[14]: type I/O Port, range 32, base 0x2200, size 6, enabled map[18]: type Memory, range 32, base 0xd0981000, size 9, enabled map[1c]: type Memory, range 32, base 0xd0982000, size 8, enabled found-> vendor=0x8086, dev=0x266d, revid=0x03 bus=0, slot=30, func=3 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled map[14]: type I/O Port, range 32, base 0x2500, size 7, enabled found-> vendor=0x8086, dev=0x2641, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266f, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x2580, size 4, enabled vgapci0: <VGA-compatible display> port 0x5000-0x5007 mem 0xd0800000-0xd087ffff,0xc0000000-0xcfffffff,0xd0880000-0xd08bffff irq 10 at device 2.0 on pci0 agp0: <Intel 82915GM (915GM GMCH) SVGA controller> on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0800000 vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xd0880000 agp0: detected 7932k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xd0900000-0xd097ffff at device 2.1 on pci0 pcib1: <PCI-PCI bridge> irq 10 at device 28.0 on pci0 pcib1: secondary bus 16 pcib1: subordinate bus 16 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xd0000000-0xd03fffff pcib1: no prefetched decode pci16: <PCI bus> on pcib1 pci16: physical bus=16 found-> vendor=0x14e4, dev=0x167d, revid=0x11 bus=16, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type Memory, range 64, base 0xd0000000, size 16, enabled pcib1: requested memory range 0xd0000000-0xd000ffff: good pci16:0:0: bad VPD cksum, remain 14 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xd0000000-0xd000ffff irq 10 at device 0.0 on pci16 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0000000 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: OUI 0x000818, model 0x0018, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:14:c2:df:4b:3e bge0: [MPSAFE] bge0: [ITHREAD] pcib2: <PCI-PCI bridge> at device 28.1 on pci0 pcib2: secondary bus 32 pcib2: subordinate bus 32 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci32: <PCI bus> on pcib2 pci32: physical bus=32 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x2000-0x201f irq 10 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x2020-0x203f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x2040-0x205f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd0980000-0xd09803ff irq 10 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0980000 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: wrong number of companions (4 != 3) usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 8 ports with 8 removable, self powered pcib3: <PCI-PCI bridge> at device 30.0 on pci0 pcib3: secondary bus 2 pcib3: subordinate bus 3 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xd0400000-0xd07fffff pcib3: no prefetched decode pcib3: Subtractively decoded bridge. pci2: <PCI bus> on pcib3 pci2: physical bus=2 found-> vendor=0x8086, dev=0x4220, revid=0x05 bus=2, slot=4, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd0400000, size 12, enabled pcib3: requested memory range 0xd0400000-0xd0400fff: good found-> vendor=0x104c, dev=0x8031, revid=0x00 bus=2, slot=6, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0401000, size 12, enabled pcib3: requested memory range 0xd0401000-0xd0401fff: good found-> vendor=0x104c, dev=0x8033, revid=0x00 bus=2, slot=6, func=3 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=b, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0402000, size 13, enabled pcib3: requested memory range 0xd0402000-0xd0403fff: good found-> vendor=0x104c, dev=0x8034, revid=0x00 bus=2, slot=6, func=4 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0404000, size 8, enabled pcib3: requested memory range 0xd0404000-0xd04040ff: good map[14]: type Memory, range 32, base 0xd0405000, size 8, enabled pcib3: requested memory range 0xd0405000-0xd04050ff: good map[18]: type Memory, range 32, base 0xd0406000, size 8, enabled pcib3: requested memory range 0xd0406000-0xd04060ff: good found-> vendor=0x104c, dev=0x8035, revid=0x00 bus=2, slot=6, func=5 class=07-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd0407000, size 12, enabled pcib3: requested memory range 0xd0407000-0xd0407fff: good map[14]: type Memory, range 32, base 0xd0408000, size 12, enabled pcib3: requested memory range 0xd0408000-0xd0408fff: good map[18]: type Memory, range 32, base 0xd0409000, size 12, enabled pcib3: requested memory range 0xd0409000-0xd0409fff: good map[1c]: type Memory, range 32, base 0xd040a000, size 12, enabled pcib3: requested memory range 0xd040a000-0xd040afff: good iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0400000-0xd0400fff irq 11 at device 4.0 on pci2 iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0400000 iwi0: bpf attached iwi0: Ethernet address: 00:15:00:3a:f8:2a iwi0: bpf attached iwi0: bpf attached iwi0: [MPSAFE] iwi0: [ITHREAD] iwi0: auto rates: iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0: <TI6411 PCI-CardBus Bridge> mem 0xd0401000-0xd0401fff irq 11 at device 6.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0401000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x8031104c 0x02100007 0x06070000 0x00824010 0x10: 0xd0401000 0x020000a0 0x20030302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b 0x40: 0x0944103c 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x08441060 0x00000000 0x00070010 0x01111b22 0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci2: <mass storage> at device 6.3 (no driver attached) pci2: <base peripheral> at device 6.4 (no driver attached) pci2: <simple comms> at device 6.5 (no driver attached) pcm0: <Intel ICH6 (82801FB)> port 0x2100-0x21ff,0x2200-0x223f mem 0xd0981000-0xd09811ff,0xd0982000-0xd09820ff irq 11 at device 30.2 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xd0981000 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xd0982000 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1ec18000, 4000; 0xd4bfa000 -> 1ec18000 pcm0: sndbuf_setmap 1ec20000, 4000; 0xd4bfe000 -> 1ec20000 pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2580-0x258f irq 10 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2580 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ata1: [ITHREAD] unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 15 devices, largest 250 bytes PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 PNP0c04: adding irq mask 0x2000 pnpbios: handle 1 device ID PNP0c04 (040cd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x1f7fffff, size=0x1f700000 pnpbios: handle 2 device ID PNP0c01 (010cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 3 device ID PNP0a03 (030ad041) PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x8f, size=0x10, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 PNP0200: adding dma mask 0x10 pnpbios: handle 5 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: adding irq mask 0x1 pnpbios: handle 6 device ID PNP0100 (0001d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: adding io range 0x72-0x72, size=0x1, align=0 PNP0b00: adding io range 0x73-0x73, size=0x1, align=0 PNP0b00: adding irq mask 0x100 pnpbios: handle 8 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: adding irq mask 0x2 pnpbios: handle 9 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 10 device ID PNP0f13 (130fd041) PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x2 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77a, size=0x3, align=0 pnpbios: handle 11 device ID PNP0401 (0104d041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: adding irq mask 0x8 pnpbios: handle 12 device ID PNP0501 (0105d041) SMCf010: adding io range 0x3e8-0x3ef, size=0x8, align=0 SMCf010: adding io range 0x300-0x30f, size=0x10, align=0x10 SMCf010: adding irq mask 0x8 SMCf010: adding dma mask 0x8 pnpbios: handle 13 device ID SMCf010 (10f0a34d) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0 pnpbios: handle 14 device ID PNP0e03 (030ed041) PNP0c02: adding fixed memory32 range 0xfff0000-0x100effff, size=0x100000 PNP0c02: adding fixed memory32 range 0xffb0000-0x100b03ff, size=0x100400 PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0 PNP0c02: adding io range 0x24-0x3f, size=0x1c, align=0 PNP0c02: adding io range 0x4e-0x4f, size=0x2, align=0 PNP0c02: adding io range 0x50-0x53, size=0x4, align=0 PNP0c02: adding io range 0x68-0x6f, size=0x8, align=0 PNP0c02: adding io range 0x74-0x77, size=0x4, align=0 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0 PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0 PNP0c02: adding io range 0xa4-0xbd, size=0x1a, align=0 PNP0c02: adding io range 0x510-0x51f, size=0x10, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0x1000-0x107f, size=0x80, align=0 PNP0c02: adding io range 0x1100-0x112f, size=0x30, align=0 PNP0c02: adding io range 0x1200-0x121f, size=0x20, align=0 pnpbios: handle 15 device ID PNP0c02 (020cd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd2fff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x401 0x411 0x401 0x401 sio0: irq maps: 0x401 0x411 0x401 0x401 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x401 0x401 0x401 0x401 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0 unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 pnpid PNP0f13 on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f pnpid PNP0401 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0 sio4: irq maps: 0x401 0x409 0x401 0x401 sio4: irq maps: 0x401 0x409 0x401 0x401 sio4: <16550 or compatible> at port 0x3e8-0x3ef,0x300-0x30f irq 3 drq 3 pnpid SMCf010 on isa0 sio4: type 16550A sio4: [FILTER] unknown: <PNP0e03> failed to probe at port 0x3e0-0x3e1 irq 5 pnpid PNP0e03 on isa0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0c02> at iomem 0xfff0000-0x100effff pnpid PNP0c02 on isa0 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/20.00, addr 2> on uhub1 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered Timecounter "TSC" frequency 1729179705 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. ata0-slave: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad0: setting PIO4 on ICH6 chip ad0: setting UDMA100 on ICH6 chip ad0: 57231MB <WDC WD600VE-00HDT0 09.07D09> at ata0-master UDMA100 ad0: 117210240 sectors [124032C/15H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed acd0: setting PIO4 on ICH6 chip acd0: <UJDA765aDVD/CDRW/1.02> CDRW drive at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm data disc pcm0: measured ac97 link rate at 48006 Hz, will use 48000 Hz ATA PseudoRAID loaded WARNING: WITNESS option enabled, expect reduced performance. GEOM_LABEL: Label for provider acd0 is iso9660/styabap. Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init bge0: link UP ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled Linux ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?325305250709010712n4bd0d62l9a144572441cf3dc>