Date: Sun, 02 Nov 1997 12:32:02 +0100 From: Micha Class <michael_class@hpbbse.bbn.hp.com> To: freebsd-scsi@freebsd.org Subject: Burning Audio-CD on HP4020i does not work Message-ID: <345C64B2.2ED68420@hpbbse.bbn.hp.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello,
I am having here a probblem in not beeing able to butn audio CD's on my
systen for quite some time. Right now I am using a 3.0-current SNAP from
Oct. 24th.
Symtom:
Burning does not start, I get the following error-messages:
Nov 2 12:20:40 pc-micha /kernel: worm0: ILLEGAL REQUEST asc:2c,0
Command sequence error
Nov 2 12:20:42 pc-micha last message repeated 2 times
I am using the following script:
#!/bin/sh
#
# usage: burncd input-file
#
# Note: This is set up to work ONLY on the HP 4020i CDR drive!
# See the man page for wormcontrol(1) and change the wormcontrol
commands
# to match your drive, if the man page lists it as supported.
#
# This script also requires the usage of team(1), an optional component
from
# the FreeBSD ports collection.
if [ "`id -u`" != "0" ]; then
echo "Sorry, this must be done as root."
else
echo -n "Place CD in the worm drive now and press return: "
read junk
scsi -f /dev/rworm0.ctl -c "0 0 0 0 0 0" >/dev/null 2>&1
#wormcontrol prepdisk double $*
wormcontrol prepdisk single
for i in *.pcm
do
wormcontrol track audio
rtprio 5 team -v 1m 5 < $i | rtprio 5 dd of=/dev/rworm0
obs=20k
done
wormcontrol fixate 0
fi
I have added the Nootmessages and the Config-File of the Machine to this
mail.
Any Ideas what could be wrong here?
Thank you
Michael
--
-------------------------------------------------------------------------
michael class, viktor-renner str. 83, 72074 tuebingen, frg
E-Mail: michael_class@hp.com
Phone: +49 7031 14-3707 (work) +49 7071 81950 (private)
-------------------------------------------------------------------------
[-- Attachment #2 --]
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-971024-SNAP #0: Fri Oct 24 18:15:50 MEST 1997
michaelc@pc-micha.zdv.uni-tuebingen.de:/usr/src/sys/compile/MCSCSI
CPU: Pentium Pro (232.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 63655936 (62164K bytes)
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.1.0
vga0: <VGA-compatible display device> rev 0x00 int a irq 15 on pci0.10.0
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 9 on pci0.11.0
ncr0: waiting for scsi devices to settle
scbus0 at ncr0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <QUANTUM PD1800S 3161> type 0 fixed SCSI 2
sd0: Direct-Access
sd0: 10.0 MB/s (100 ns, offset 15)
1717MB (3517856 512 byte sectors)
cd0 at scbus0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-3701TA 3615> type 5 removable SCSI 2
cd0: CD-ROM
cd0: 4.0 MB/s (250 ns, offset 15)
can't get the size
sd1 at scbus0 target 8 lun 0
sd1: <Quantum XP34300W L912> type 0 fixed SCSI 2
sd1: Direct-Access
sd1: WIDE SCSI (16 bit) enabled
sd1: 20.0 MB/s (100 ns, offset 15)
4101MB (8399520 512 byte sectors)
ncr1: <ncr 53c810 fast10 scsi> rev 0x01 int a irq 12 on pci0.12.0
ncr1: waiting for scsi devices to settle
scbus1 at ncr1 bus 0
st0 at scbus1 target 2 lun 0
st0: <HP HP35450A -A BE00> type 1 removable SCSI 2
st0: Sequential-Access
st0: asynchronous.
density code 0x13, drive empty
worm0 at scbus1 target 3 lun 0
worm0: <HP C4324/C4325 1.27> type 5 removable SCSI 2
worm0: Write-Once
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:b0:12:9a, type WD8013EBT (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 14 flags 0x20000 on isa
sio2: type ST16650A
sio3 not found at 0x2e8
sio4 not found at 0x2f0
sio5 not found at 0x3e0
sio6 not found at 0x2e0
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220-0x22f irq 5 drq 1 on isa
sb0: <SoundBlaster 16 4.13>
sbxvi0 drq 5 on isa
sbxvi0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330-0x331 on isa
sbmidi0: <SoundBlaster 16 MPU-401>
DEVFS: ready to run
IP packet filtering initialized, divert enabled, logging limited to 100 packets/entry
[-- Attachment #3 --]
#
# MCSCSI
#
# $Id: GENERICAH,v 1.36 1994/08/09 08:17:08 davidg Exp $
#
machine "i386"
#cpu "I386_CPU"
#cpu "I486_CPU"
cpu "I586_CPU"
cpu "I686_CPU"
ident MCSCSI
maxusers 32
#options MATH_EMULATE #Support for x87 emulation
options SYSVSHM
options SYSVSEM
options SYSVMSG
options INET #InterNETworking
#options QUOTA #ufs-quotas
options FFS #Berkeley Fast File System
#options LFS #Log File System
#options MFS #Memory File System
# these options are now run-time-loadable:
#options NFS #Network File System
#options MSDOSFS #MS-DOS File System
#options PROCFS #Process File System
#options KERNFS #Kernel File System
#options "CD9660" #CD ISO9660 File System
#options FDESC #File Descriptor File System
#options PORTAL #Portal File System
#options UNION #Union File System
#options NULLFS #NULL File System
#options UMAPFS #UID Map File System
# THis DEVFS is experimental but seems to work
options DEVFS #devices filesystem
options FIFO #Support for FIFO files
options "COMPAT_43" #Compatible with BSD 4.3
#options "TCP_COMPAT_42" #TCP/IP compatible with 4.2
#options "FAT_CURSOR" #block cursor in syscons or pccons
options "SCSI_DELAY=10" #Be pessimistic about Joe SCSI device
#options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab console
options USER_LDT #allow user-level control of i386 ldt
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options "AUTO_EOI_1"
options "AUTO_EOI_2"
#options GRKEYMAP # use German-Keyboard in kernel
#options "IBCS2" # make ibcs2-code loadable
#options "COMPAT_LINUX" # load linux-code
#options "LINUX" # load linux-code
#
# Allow processes to switch to vm86 mode, as well as enabling direct
# user-mode access to the I/O port space. This option is necessary for
# the doscmd emulator to run.
#
options "VM86"
# Enable the following (IPFIREWALL_VERBOSE optional) to enable the IP firewall
# code. This is used in conjunction with the ipfw(1) command. See the
# man page for more details.
options IPFIREWALL
options IPFIREWALL_VERBOSE #print information about dropped packets
options "IPFIREWALL_VERBOSE_LIMIT=100"
options IPDIVERT
options "FDSEEKWAIT=8" #fd-driver wait 1s / FDSEEKWAIT
# pcvt needs XCONSOLE for Xfree
options XCONSOLE
options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
# When this is set, copyin/copyout will use an unrolled loop using
# floating point registers. It makes copyin/copyout run 30-100%
# faster on Pentiums and makes no difference or slower on non-Pentium
# (including P6) systems.
#
# However, even when this is set, there is a run-time check for CPU
# type so the routine will never be invoked for a wrong architecture.
# It will become the default after some testing period.
#options "I586_FAST_BCOPY"
#
# Under some circumstances it is necessary to make the default max
# number of proccesses per user and open files per user more than the
# defaults on bootup. (an example is a large news server in which
# the uid, news, can sometimes need > 100 simultaneous processes running)
#options "CHILD_MAX=128"
#options "OPEN_MAX=128"
# Allow this many swap-devices.
options "NSWAPDEV=4"
config kernel root on sd0
controller isa0
#controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
#tape ft0 at fdc0 drive 2
#controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#controller ahb0
controller ncr0
controller ncr1
#controller aha0 at isa? port "IO_AHA0" bio irq 11 drq 5 vector ahaintr
controller scbus0 #base SCSI code
#device ch0 #SCSI media changers
device sd0 #SCSI disks
device st0 #SCSI tapes
device cd0 #SCSI CD-ROMs
#device od0 #SCSI optical disk
# The previous devices (ch, sd, st, cd) are recognized by config.
# config doesn't (and shouldn't) know about these newer ones,
# so we have to specify that they are on a SCSI bus with the "at scbus?"
# clause.
device worm0 at scbus? # SCSI worm
#device pt0 at scbus? # SCSI processor type
#device sctarg0 at scbus? # SCSI target
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
#syscons:
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
#pcvt:
#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty flags 0x20000 irq 14 vector siointr
device sio3 at isa? port "IO_COM4" tty flags 0x20000 irq 15 vector siointr
device sio4 at isa? port "0x2F0" tty flags 0x20000 irq 15 vector siointr
device sio5 at isa? port "0x3E0" tty flags 0x20000 irq 15 vector siointr
device sio6 at isa? port "0x2E0" tty flags 0x20000 irq 15 vector siointr
#device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
#device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt0 at isa? port? tty
#device lpt1 at isa? port? tty
#device lpt2 at isa? port? tty
device ed0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
# gsc: Genius GS-4500 hand scanner.
#device gsc0 at isa? port "IO_GSC1" tty drq 3
# Controls all sound devices
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr
device sbxvi0 at isa? drq 5
device sbmidi0 at isa? port 0x330
#device awe0 at isa? port 0x620
pseudo-device loop
pseudo-device ether
pseudo-device tun 1 #Tunnel driver(user process ppp)
#pseudo-device sl 2
#pseudo-device ppp #we use user-process ppp
pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device log
pseudo-device pty 48
pseudo-device speaker
pseudo-device gzip # Exec gzipped a.out's
pseudo-device vn #Vnode driver (turns a file into a device)
[-- Attachment #4 --]
begin: vcard
fn: Michael Class
n: Class;Michael
org: Hewlett-Packard GmbH
adr: Herrenbergerstr. 130;;;Boeblingen;Baden-Wuerttemberg;71004;Germany
email;internet: michael_class@hpbbse.bbn.hp.com
title: Technical Consultant
tel;work: +49 7031 14-3707
tel;fax: +49 7031 14-4196
x-mozilla-cpt: ;0
x-mozilla-html: FALSE
version: 2.1
end: vcard
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?345C64B2.2ED68420>