Date: Tue, 03 Mar 1998 16:06:48 -0600 From: Doug Ledford <dledford@dialnet.net> To: Michael Poole <poole+@andrew.cmu.edu> Cc: aic7xxx@FreeBSD.ORG Subject: Re: aic7880 problem talking to CD-R Message-ID: <34FC7EF8.75610325@dialnet.net> References: <Pine.SOL.3.95L.980303093952.1887A-100000@unix10.andrew.cmu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Michael Poole wrote:
> The RedHat aic7xxx driver with kernel 2.0.32 is the most verbose
> when the error occurs; under aic7xxx-5.0.7, I get one line:
> scsi0: Target 5, channel A, refusing WIDE negotiation; using 8 bit
> transfers.
> (or something to that effect) and then the machine just sits there. With
> the RedHat-supplied aic7xxx driver, I get that line, plus:
> scsi0: Channel reset, sequencer restarted
> (scsi0:5:0) Aborting scb 0
> (and more errors about Abort_Reset messages from device 5, which is the
> CD-R; they scroll rather quickly, but if they'd be helpful, I can copy
> them down verbatim), and then something about trying harder to reset; the
> messages repeat.
>
> If that were the extent of my experience with the drive, I'd chalk
> it up to a flakey CD-R. However, the drive did work and has been used to
> burn CDs in a (different) Windows 95 machine using an AHA-2940
> dual-channel narrow SCSI-2 controller without any difficulties setting it
> up. The only real difference I notice between the two (unless the chipset
> is different in some way I don't know about) is that my motherboard
> supports wide SCSI and is using it and the other machine is narrow-only.
>
> Does anyone have suggestions as to what I can try to do to make
> this work, or at least find out if it's a problem with the CD-R's firmware
> and I should scream at Matsushita/Panasonic?
Try going into the Adaptec SCSI BIOS (the CTRL-A message at bootup) and
disabling wide negotiation on the CD-R. It seems like the CD-R firmware
might be getting confused after we attempt to negotiate for wide transfers.
--
Doug Ledford <dledford@dialnet.net>
Opinions expressed are my own, but
they should be everybody's.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?34FC7EF8.75610325>