Date: Thu, 11 Jun 1998 02:52:14 -0500 From: Doug Ledford <dledford@dialnet.net> To: Elgin Lee <ehl@funghi.com> Cc: AIC7xxx@FreeBSD.ORG Subject: Re: 5.0.18: "Bad scbptr 255 during SELTO" Message-ID: <357F8CAE.EBB8C161@dialnet.net> References: <199806080500.WAA00697@porcini.funghi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Elgin Lee wrote:
>
> I just installed Linux kernel 2.0.34, updated with the 5.0.18 Adaptec
> driver. This setup seems to work reasonably so far, except that I
> often get error messages like
>
> (scsi0:-1:-1:-1) Bad scbptr 255 during SELTO.
> (scsi0:-1:-1:-1) Referenced SCB 255 not valid during SELTO.
> SCSISEQ = 0x12 SEQADDR = 0xb SSTAT0 = 0x10 SSTAT1 = 0x8a
>
> during startup. This is not always the case, however--sometimes I
> get what looks like a success message:
>
> (scsi0:-1:-1:-1) Allocating initial 30 SCB structures.
>
> Are the error messages something that I should be concerned about?
Well, you shouldn't need to be, I am. Give the 5.0.19 driver a shot. It's
on my ftp site at ftp.dialnet.net.
--
Doug Ledford <dledford@dialnet.net>
Opinions expressed are my own, but
they should be everybody's.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?357F8CAE.EBB8C161>