Date: Thu, 03 Sep 1998 23:51:30 -0500 From: Doug Ledford <dledford@dialnet.net> To: Michael Meissner <meissner@cygnus.com> Cc: linux-kernel@vger.rutgers.edu, AIC7xxx@FreeBSD.ORG Subject: Re: Archive Python DAT tape and Adaptec Message-ID: <35EF71D2.D713B3D6@dialnet.net> References: <199809031634.MAA06783@wogglebug.cygnus.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Michael Meissner wrote:
> The Adaptec driver that's been shipping with the latest experimental
> Linux kernels with a version # of 5.0.20 does not work reliably with
> my 3 year old Archive DAT DDS-1 tape drive. I had a similar problem
> with another Archive DAT of the same vintage on my work computer
> (about six months ago, the Adaptec was dealt with the tape drive
> completely fine until I switched to TekRam 390{U,F} controllers). The
> Archive is an asynch-only device, and I have the jumpers set for
> SCSI-2 and Parity support.
The 5.0.x and 5.1.x driver series do device negotiation in different ways,
and the problem is probably stemming from there. Try disabling all sync and
wide negotiation for the Archive tape in the Adaptec EZ-SCSI BIOS setup
screen (the Ctrl-A message at boot up).
--
Doug Ledford <dledford@dialnet.net>
Opinions expressed are my own, but
they should be everybody's.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35EF71D2.D713B3D6>