Date: Mon, 8 Feb 2021 09:20:38 +0100 From: Jesper Schmitz Mouridsen <jsm@FreeBSD.org> To: KIRIYAMA Kazuhiko <kiri@truefc.org> Cc: freebsd-arm@freebsd.org Subject: Re: Pinebook Pro display. Message-ID: <36699f90-fadd-86db-d6ee-62fadc0caf95@FreeBSD.org> In-Reply-To: <202102080652.1186qEGm050474@kx.truefc.org> References: <3161cf79-0ec1-a3bc-801f-084d014ca92d@FreeBSD.org> <202102040606.11466HZB089892@kx.truefc.org> <9dcde0d6-ccd9-af13-dffa-5a80d221cff9@FreeBSD.org> <202102080652.1186qEGm050474@kx.truefc.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 08.02.2021 07.52, KIRIYAMA Kazuhiko wrote: > On Thu, 04 Feb 2021 22:24:05 +0900, > Jesper Schmitz Mouridsen wrote: >> >> On 04.02.2021 07.06, KIRIYAMA Kazuhiko wrote: >>> Hi, Jesper >>> >>> On Mon, 01 Feb 2021 00:49:24 +0900, >>> Jesper Schmitz Mouridsen wrote: >>>> Hi >>>> >>>> Just for information, I did some trial and error on u-boot for the >>>> >>>> Pinebook Pro in order to have display working without hacking >>>> >>>> the kernel. See https://github.com/jsm222/ports and >>> I've modified for u-boot-2020.10 [1] and remade >>> idbloader.img and u-boot.itb then install those and reboot. >>> But could not display console ;-( >> I sent you a PM with a patch. >> >> Also we did some duplicate work, see >> >> https://github.com/jsm222/u-boot-pinebookpro > I've tested above, it display until FreeBSD kernel boot but > blackout after. Namely display console > from `U-Boot 2020.10 (Feb 08 2021 -10:55:28 +0900)' > to `masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000' > and blackout after '---<<BOOT>>---' in the below log : > > root@kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0 > Connected > > U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28) > Channel 0: LPDDR4, 50MHz > BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 Si= ze=3D2048MB > Channel 1: LPDDR4, 50MHz > BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 Si= ze=3D2048MB > 256B stride > lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > Trying to boot from BOOTROM > Returning to boot ROM... Hi, you also need to copy the u-boot dtb files to the efi partition from /usr/ports/sysutils/u-boot-pinebookpro/work/u-boot-2020.10. sudo find . -name "*.dtb" -exec cp -iv {} /mnt/dtb/rockchip/ \; after make. Otherwise the ACLK_VOP1 goes to 800000000, and we lose display. /Jesper > U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900) > Trying to boot from MMC2 > > > U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900) > Consoles: EFI console > Reading loader env vars from /efi/freebsd/loader.env > Setting currdev to disk0p1: > FreeBSD/arm64 EFI loader, Revision 1.1 > (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) > > Command line arguments: loader.efi > Image base: 0xf3df0000 > EFI version: 2.80 > EFI Firmware: Das U-Boot (rev 8224.4096) > Console: comconsole (0) > Load Path: /efi\boot\bootaa64.efi > Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/e= MMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) > Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0= )/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) > Setting currdev to disk0p1: > Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD= (2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000) > Setting currdev to disk0p2: > Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD= (3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80) > Setting currdev to disk0p3: > Loading /boot/defaults/loader.conf > Loading /boot/defaults/loader.conf > Loading /boot/device.hints > Loading /boot/loader.conf > Loading /boot/loader.conf.local > c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....= ---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` = +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ = [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m= [14;48H / [31;1m`-- /[31m[15;48H `: = [31;1m:`[31m[16;48H `: [31;1m:`[31m[17= ;48H / [31;1m/[31m[18;48H .- = [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H = `:` [31;1m`:`[21;48H [31;1m.-- `--.[2= 2;48H .---.....----.[m[1;2H ______ ____ _____ __= ___ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ __= _ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | = | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | |= || | | |[7;2H |_| |_| ! > \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H----= -------------------------------------[22;3H------------------------------= -----------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[1= 4;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|= [19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;= 5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle use= r[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1= mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mk= ernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 = seconds, hit [Enter] to boot or any other key to stop > [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key= to stop > [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key= to stop > [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key= to stop > [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key= to stop > [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key= to stop > [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key= to stop > [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key= to stop > [25;0HLoading kernel... > /boot/kernel/kernel text=3D0x2a8 text=3D0x87de9c text=3D0x1f04bc data=3D= 0x19b3c0 data=3D0x0+0x53ffc6 syms=3D[0x8+0x116910+0x8+0x13b60e] > Loading configured modules... > /etc/hostid size=3D0x25 > /boot/entropy size=3D0x1000 > Using DTB provided by EFI at 0x80ec000. > EFI framebuffer information: > addr, size 0xf7800000, 0x3f4800 > dimensions 1920 x 1080 > stride 1920 > masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 > ---<<BOOT>>--- > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2020 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 199= 4 > The Regents of the University of California. All rights reserv= ed. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 > admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 > FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvm= org-11.0.0-0-g176249bd673) > WARNING: WITNESS option enabled, expect reduced performance. > VT(efifb): resolution 1920x1080 > module firmware already present! > real memory =3D 4158373888 (3965 MB) > avail memory =3D 4025094144 (3838 MB) > Starting CPU 1 (1) > Starting CPU 2 (2) > Starting CPU 3 (3) > Starting CPU 4 (100) > Starting CPU 5 (101) > FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs > random: unblocking device. > random: entropy device external interface > MAP f3f16000 mode 2 pages 4 > MAP f3f1b000 mode 2 pages 4 > MAP f6f40000 mode 2 pages 16 > WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD= 13.0. > kbd0 at kbdmux0 > WARNING: Device "openfirm" is Giant locked and may be deleted before Fr= eeBSD 13.0. > ofwbus0: <Open Firmware Device Tree> > clk_fixed0: <Fixed clock> on ofwbus0 > simplebus0: <Flattened device tree simple bus> on ofwbus0 > rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on= ofwbus0 > rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff7500= 00-0xff750fff on ofwbus0 > rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff= 760fff on ofwbus0 > rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on= ofwbus0 > regfix0: <Fixed Regulator> on ofwbus0 > regfix1: <Fixed Regulator> on ofwbus0 > regfix2: <Fixed Regulator> on ofwbus0 > regfix3: <Fixed Regulator> on ofwbus0 > regfix4: <Fixed Regulator> on ofwbus0 > regfix5: <Fixed Regulator> on ofwbus0 > regfix6: <Fixed Regulator> on ofwbus0 > regfix7: <Fixed Regulator> on ofwbus0 > regfix8: <Fixed Regulator> on ofwbus0 > regfix9: <Fixed Regulator> on ofwbus0 > regfix10: <Fixed Regulator> on ofwbus0 > regfix11: <Fixed Regulator> on ofwbus0 > simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff3= 10fff on ofwbus0 > psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 > gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff= ,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff2= 0000-0xfff2ffff irq 18 on ofwbus0 > its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff= on gic0 > rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on = rk_grf0 > rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on= rk_grf1 > rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 > gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71= on rk_pinctrl0 > gpiobus0: <OFW GPIO bus> on gpio0 > gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72= on rk_pinctrl0 > gpiobus1: <OFW GPIO bus> on gpio1 > gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73= on rk_pinctrl0 > gpiobus2: <OFW GPIO bus> on gpio2 > gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74= on rk_pinctrl0 > gpiobus3: <OFW GPIO bus> on gpio3 > gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75= on rk_pinctrl0 > gpiobus4: <OFW GPIO bus> on gpio4 > rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 > iicbus0: <OFW I2C bus> on rk_i2c0 > rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 > iicbus1: <OFW I2C bus> on rk_i2c1 > rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 > iicbus2: <OFW I2C bus> on rk_i2c2 > syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 > rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 > iicbus3: <OFW I2C bus> on rk_i2c3 > rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 > generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 > Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000= > Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 > rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq= 35 on ofwbus0 > rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_= grf1 > rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_= grf1 > rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk= _grf1 > rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on r= k_grf1 > rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on= ofwbus0 > rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on= ofwbus0 > cpulist0: <Open Firmware CPU Group> on ofwbus0 > cpu0: <Open Firmware CPU> on cpulist0 > cpufreq_dt0: <Generic cpufreq driver> on cpu0 > cpu1: <Open Firmware CPU> on cpulist0 > cpufreq_dt1: <Generic cpufreq driver> on cpu1 > cpu2: <Open Firmware CPU> on cpulist0 > cpufreq_dt2: <Generic cpufreq driver> on cpu2 > cpu3: <Open Firmware CPU> on cpulist0 > cpufreq_dt3: <Generic cpufreq driver> on cpu3 > cpu4: <Open Firmware CPU> on cpulist0 > cpufreq_dt4: <Generic cpufreq driver> on cpu4 > cpu5: <Open Firmware CPU> on cpulist0 > cpufreq_dt5: <Generic cpufreq driver> on cpu5 > pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-= 0xfdffffff irq 6,7,8 on ofwbus0 > pcib0: Gen1 link training timeouted: 0x00080001. > pci0: <PCI bus> on pcib0 > pcib1: <PCI-PCI bridge> at device 0.0 on pci0 > pcib0: failed to reserve resource for pcib1 > pcib1: failed to allocate initial memory window: 0-0xfffff > pci1: <PCI bus> on pcib1 > rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (R= ockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 > rockchip_dwmmc0: Hardware version ID is 270a > rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (R= ockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 > rockchip_dwmmc1: Hardware version ID is 270a > sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe3= 3ffff irq 12 on ofwbus0 > rk_emmcphy0: got emmcclk clock > sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, set= ting BROKEN_TIMEOUT quirk. > sdhci_fdt0: 1 slot(s) allocated > mmc0: <MMC/SD bus> on sdhci_fdt0 > ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on of= wbus0 > usbus0: EHCI version 1.0 > usbus0 on ehci0 > ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on of= wbus0 > usbus1 on ohci0 > ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on of= wbus0 > usbus2: EHCI version 1.0 > usbus2 on ehci1 > ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on of= wbus0 > usbus3 on ohci1 > rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 > xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on r= k_dwc30 > xhci0: 64 bytes context size, 32-bit DMA > usbus4: trying to attach > usbus4 on xhci0 > rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 > xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on r= k_dwc31 > xhci1: 64 bytes context size, 32-bit DMA > usbus5: trying to attach > usbus5 on xhci1 > iicbus0: <unknown card> at addr 0x22 > iic0: <I2C generic I/O> on iicbus0 > iic1: <I2C generic I/O> on iicbus1 > uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus= 0 > uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus= 0 > uart1: console (1500000,n,8,1) > spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 > spibus0: <OFW SPI bus> on spi0 > spibus0: <unknown card> at cs 0 mode 0 > iicbus2: <unknown card> at addr 0x82 > iic2: <I2C generic I/O> on iicbus2 > iicbus3: <unknown card> at addr 0x44 > iic3: <I2C generic I/O> on iicbus3 > pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 > pwmbus0: <OFW PWM bus> on pwm0 > pwmc0: <PWM Control> channel 0 on pwmbus0 > pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 > pwmbus1: <OFW PWM bus> on pwm1 > pwmc1: <PWM Control> channel 0 on pwmbus1 > gpioc0: <GPIO controller> on gpio0 > gpioc1: <GPIO controller> on gpio1 > gpioc2: <GPIO controller> on gpio2 > gpioc3: <GPIO controller> on gpio3 > gpioc4: <GPIO controller> on gpio4 > gpioled0: <GPIO LEDs> on ofwbus0 > cryptosoft0: <software crypto> > Timecounters tick every 1.000 msec > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 480Mbps High Speed USB v2.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 5.0Gbps Super Speed USB v3.0 > usbus5: 5.0Gbps Super Speed USB v3.0 > ugen3.1: <Generic OHCI root HUB> at usbus3 > uhub0 on usbus3 > uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usb= us3 > ugen2.1: <Generic EHCI root HUB> at usbus2 > uhub1 on usbus2 > uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usb= us2 > ugen1.1: <Generic OHCI root HUB> at usbus1 > uhub2 on usbus1 > uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usb= us1 > ugen0.1: <Generic EHCI root HUB> at usbus0 > uhub3 on usbus0 > uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usb= us0 > ugen5.1: <Synopsys XHCI root HUB> at usbus5 > uhub4 on usbus5 > uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on us= bus5 > ugen4.1: <Synopsys XHCI root HUB> at usbus4 > uhub5 on usbus4 > uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on us= bus4 > mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> a= t mmc0 25.0MHz/8bit/65535-block > mmcsd0boot0: 4MB partition 1 at mmcsd0 > mmcsd0boot1: 4MB partition 2 at mmcsd0 > mmcsd0rpmb: 17MB partition 3 at mmcsd0 > Release APs...done > CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 > Cache Type =3D <64 byte D-cacheline,64 byte I-cache= line,VIPT ICache,64 byte ERG,64 byte CWG> > Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL> > Instruction Set Attributes 1 =3D <> > Processor Features 0 =3D <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32= ,EL0 32> > Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... > Processor Features 1 =3D <> > Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit = ASID,1TB PA> > Memory Model Features 1 =3D <8bit VMID> > Memory Model Features 2 =3D <32bit CCIDX,48bit VA> > Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 Breakpo= ints,PMUv3,Debugv8> > Debug Features 1 =3D <> > Auxiliary Features 0 =3D <> > Auxiliary Features 1 =3D <> > CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 > Cache Type =3D <64 byte D-cacheline,64 byte I-cache= line,VIPT ICache,64 byte ERG,64 byte CWG> > Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit = ASID,1TB PA> > CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 > Cache Type =3D <64 byte D-cacheline,64 byte I-cache= line,VIPT ICache,64 byte ERG,64 byte CWG> > Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit = ASID,1TB PA> > CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 > Cache Type =3D <64 byte D-cacheline,64 byte I-cache= line,VIPT ICache,64 byte ERG,64 byte CWG> > Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit = ASID,1TB PA> > CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 > Cache Type =3D <64 byte D-cacheline,64 byte I-cache= line,PIPT ICache,64 byte ERG,64 byte CWG> > Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit = ASID,16TB PA> > CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 > Cache Type =3D <64 byte D-cacheline,64 byte I-cache= line,PIPT ICache,64 byte ERG,64 byte CWG> > Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit = ASID,16TB PA> > WARNING: WITNESS option enabled, expect reduced performance. > Unresolved linked clock found: clkin_gmac > uhub0: 1 port with 1 removable, self powered > uhub2: 1 port with 1 removable, self powered > uhub5: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > Warning: no time-of-day clock registered, system time will not be set a= ccurately > uhub1: 1 port with 1 removable, self powered > uhub3: 1 port with 1 removable, self powered > Setting hostuuid: 31323634-3737-6236-6162-336630376339. > Setting hostid: 0x5d4b60f9. > Starting file system checks: > /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/mmcsd0p3: clean, 27264803 free (363 frags, 3408055 blocks, 0.0% fr= agmentation) > lock order reversal: > 1st 0xffffa00062c99440 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mou= nt.c:1724 > 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs= _subr.c:2918 > lock order devfs -> ufs established at: > #0 0xffff000000569234 at witness_checkorder+0x448 > #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 > #2 0xffff00000075ad38 at ffs_lock+0x64 > #3 0xffff0000005ed57c at _vn_lock+0x54 > #4 0xffff0000005ce630 at vfs_domount+0xdf8 > #5 0xffff0000005cca08 at vfs_donmount+0x2b4 > #6 0xffff0000005d0e78 at kernel_mount+0x4c > #7 0xffff0000005d3564 at parse_mount+0x49c > #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc > #9 0xffff00000048dc68 at start_init+0x24 > #10 0xffff0000004b7474 at fork_exit+0x7c > lock order ufs -> devfs attempted at: > #0 0xffff000000569a40 at witness_checkorder+0xc54 > #1 0xffff0000004cd560 at lockmgr_xlock+0x50 > #2 0xffff0000005ed57c at _vn_lock+0x54 > #3 0xffff0000005d77d8 at vget_finish+0x4c > #4 0xffff0000003b1b30 at devfs_allocv+0xd0 > #5 0xffff0000003b12c0 at devfs_root+0x44 > #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 > #7 0xffff0000005d89b0 at vflush+0x5c > #8 0xffff0000003b11c8 at devfs_unmount+0x34 > #9 0xffff0000005cf4c4 at dounmount+0x43c > #10 0xffff0000005cf040 at kern_unmount+0x2d8 > #11 0xffff000000812d0c at do_el0_sync+0x454 > #12 0xffff0000007f2a24 at handle_el0_sync+0x90 > Mounting local filesystems:. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat > ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 > ukbd0 on uhub2 > ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2>= on usbus1 > kbd1 at ukbd0 > Setting hostname: kazu.tfc. > Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER= ],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > Feeding entropy: . > lo0: link state changed to UP > Starting Network: lo0. > lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IP= V6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > inet 127.0.0.1 netmask 0xff000000 > groups: lo > nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> > Starting devd. > Autoloading module: mx25l.ko > mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 > mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase = size 4K > Autoloading module: pwm_backlight.ko > link_elf: symbol backlight_get_info_desc undefined > kldload: can't load pwm_backlight.ko: No such file or directory > Autoloading module: uhid.ko > Autoloading module: wmt.ko > add host 127.0.0.1: gateway lo0 fib 0: route already in table > route: writing to routing socket: Network is unreachable > add net default: gateway 192.168.1.254 fib 0: Network is unreachable > add host ::1: gateway lo0 fib 0: route already in table > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > Updating /var/run/os-release done. > Creating and/or trimming log files. > Updating motd:. > Clearing /tmp (X related). > Starting syslogd. > No core dumps found. > Mounting late filesystems:. > Security policy loaded: MAC/ntpd (mac_ntpd) > Starting ntpd. > Feb 8 15:24:40 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-se= conds.list'): expired 43 days ago > Performing sanity check on sshd configuration. > Starting sshd. > Starting cron. > Starting sendmail. > Starting sendmail_msp_queue. > Feb 8 15:24:41 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.nt= p.org: Name does not resolve (8) > Configuring vt: blanktime screensaverkldload: can't load logo_saver: No= such file or directory > /etc/rc: WARNING: Unable to load kernel module logo_saver > . > Starting background file system checks in 60 seconds. > > Mon Feb 8 15:24:42 JST 2021 > > FreeBSD/arm64 (kazu.tfc) (ttyu1) > > login: > > >> regards >> >> /Jesper >> >>> root@kazu:~ # cu -s 1500000 -l /dev/cuaU0 >>> Connected >>> >>> U-Boot TPL 2020.10 (Feb 03 2021 - 11:13:01) >>> Channel 0: LPDDR4, 50MHz >>> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 = Size=3D2048MB >>> Channel 1: LPDDR4, 50MHz >>> BW=3D32 Col=3D10 Bk=3D8 CS0 Row=3D15 CS1 Row=3D15 CS=3D2 Die BW=3D16 = Size=3D2048MB >>> 256B stride >>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1 >>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0 >>> Trying to boot from BOOTROM >>> Returning to boot ROM... >>> >>> U-Boot SPL 2020.10 (Feb 03 2021 - 11:13:01 +0900) >>> Trying to boot from MMC2 >>> >>> >>> U-Boot 2020.10 (Feb 03 2021 - 11:13:01 +0900) >>> >>> SoC: Rockchip rk3399 >>> Reset cause: POR >>> Model: Pine64 Pinebook Pro >>> DRAM: 3.9 GiB >>> PMIC: RK808 >>> MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 >>> Loading Environment from SPIFlash... Invalid bus 0 (err=3D-19) >>> *** Warning - spi_flash_probe_bus_cs() failed, using default environm= ent >>> >>> In: serial >>> Out: serial >>> Err: serial >>> Model: Pine64 Pinebook Pro >>> Net: No ethernet found. >>> Failed to load 'splash.bmp' >>> Card did not respond to voltage select! >>> Hit any key to stop autoboot: 0 >>> Consoles: EFI console >>> Read loader env vars from /efi/freebsd/loader.env >>> Setting currdev to disk0p1: >>> FreeBSD/arm64 EFI loader, Revision 1.1 >>> (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) >>> >>> Command line arguments: loader.efi >>> Image base: 0xf3dee000 >>> EFI version: 2.80 >>> EFI Firmware: Das U-Boot (rev 8224.4096) >>> Console: comconsole (0) >>> Load Path: /efi\boot\bootaa64.efi >>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0= )/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000) >>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC= (0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000) >>> Setting currdev to disk0p1: >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/= HD(2,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x21000,0x1000000) >>> Setting currdev to disk0p2: >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/= HD(3,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x1021000,0xd8d4f80) >>> Setting currdev to disk0p3: >>> Loading /boot/defaults/loader.conf >>> Loading /boot/defaults/loader.conf >>> Loading /boot/device.hints >>> Loading /boot/loader.conf >>> Loading /boot/loader.conf.local >>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `...= =2E.---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` = +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ = [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.= [31m[14;48H / [31;1m`-- /[31m[15;48H `: = [31;1m:`[31m[16;48H `: [31;1m:`[31= m[17;48H / [31;1m/[31m[18;48H .- = [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;4= 8H `:` [31;1m`:`[21;48H [31;1m.-- `-= -.[22;48H .---.....----.[m[1;2H ______ ____ ____= _ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ _= _ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \|= | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | = | || | | |[7;2H |_| ! > |_| ! >>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-= ----------------------------------------[22;3H---------------------------= --------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H= |[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;4= 4H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[= 11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle = user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5.= [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[3= 2mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in = 10 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 9 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 8 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 7 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other k= ey to stop >>> [25;0HLoading kernel... >>> /boot/kernel/kernel text=3D0x2a8 text=3D0x87de9c text=3D0x1f04bc data= =3D0x19b3c0 data=3D0x0+0x53ffc6 syms=3D[0x8+0x116910+0x8+0x13b60e] >>> Loading configured modules... >>> /etc/hostid size=3D0x25 >>> /boot/entropy size=3D0x1000 >>> Using DTB provided by EFI at 0x80ec000. >>> EFI framebuffer information: >>> addr, size 0xf7800000, 0x3f4800 >>> dimensions 1920 x 1080 >>> stride 1920 >>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 >>> ---<<BOOT>>--- >>> KDB: debugger backends: ddb >>> KDB: current backend: ddb >>> Copyright (c) 1992-2020 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1= 994 >>> The Regents of the University of California. All rights res= erved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 >>> admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 >>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git ll= vmorg-11.0.0-0-g176249bd673) >>> WARNING: WITNESS option enabled, expect reduced performance. >>> VT(efifb): resolution 1920x1080 >>> module firmware already present! >>> real memory =3D 4158377984 (3965 MB) >>> avail memory =3D 4025098240 (3838 MB) >>> Starting CPU 1 (1) >>> Starting CPU 2 (2) >>> Starting CPU 3 (3) >>> Starting CPU 4 (100) >>> Starting CPU 5 (101) >>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs >>> random: unblocking device. >>> random: entropy device external interface >>> MAP f3f16000 mode 2 pages 4 >>> MAP f3f1b000 mode 2 pages 4 >>> MAP f6f40000 mode 2 pages 16 >>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeB= SD 13.0. >>> kbd0 at kbdmux0 >>> WARNING: Device "openfirm" is Giant locked and may be deleted before = FreeBSD 13.0. >>> ofwbus0: <Open Firmware Device Tree> >>> clk_fixed0: <Fixed clock> on ofwbus0 >>> simplebus0: <Flattened device tree simple bus> on ofwbus0 >>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff = on ofwbus0 >>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff75= 0000-0xff750fff on ofwbus0 >>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0x= ff760fff on ofwbus0 >>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff = on ofwbus0 >>> regfix0: <Fixed Regulator> on ofwbus0 >>> regfix1: <Fixed Regulator> on ofwbus0 >>> regfix2: <Fixed Regulator> on ofwbus0 >>> regfix3: <Fixed Regulator> on ofwbus0 >>> regfix4: <Fixed Regulator> on ofwbus0 >>> regfix5: <Fixed Regulator> on ofwbus0 >>> regfix6: <Fixed Regulator> on ofwbus0 >>> regfix7: <Fixed Regulator> on ofwbus0 >>> regfix8: <Fixed Regulator> on ofwbus0 >>> regfix9: <Fixed Regulator> on ofwbus0 >>> regfix10: <Fixed Regulator> on ofwbus0 >>> regfix11: <Fixed Regulator> on ofwbus0 >>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xf= f310fff on ofwbus0 >>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ff= ff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xff= f20000-0xfff2ffff irq 18 on ofwbus0 >>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ff= ff on gic0 >>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff o= n rk_grf0 >>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff = on rk_grf1 >>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 >>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq = 71 on rk_pinctrl0 >>> gpiobus0: <OFW GPIO bus> on gpio0 >>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq = 72 on rk_pinctrl0 >>> gpiobus1: <OFW GPIO bus> on gpio1 >>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq = 73 on rk_pinctrl0 >>> gpiobus2: <OFW GPIO bus> on gpio2 >>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq = 74 on rk_pinctrl0 >>> gpiobus3: <OFW GPIO bus> on gpio3 >>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq = 75 on rk_pinctrl0 >>> gpiobus4: <OFW GPIO bus> on gpio4 >>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 >>> iicbus0: <OFW I2C bus> on rk_i2c0 >>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 >>> iicbus1: <OFW I2C bus> on rk_i2c1 >>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 >>> iicbus2: <OFW I2C bus> on rk_i2c2 >>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 >>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 >>> iicbus3: <OFW I2C bus> on rk_i2c3 >>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 >>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 >>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 10= 00 >>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 100= 0 >>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff i= rq 35 on ofwbus0 >>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffffrk_us= b2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on = rk_grf1 >>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on= rk_grf1 >>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff = on ofwbus0 >>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff = on ofwbus0 >>> cpulist0: <Open Firmware CPU Group> on ofwbus0 >>> cpu0: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt0: <Generic cpufreq driver> on cpu0 >>> cpu1: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt1: <Generic cpufreq driver> on cpu1 >>> cpu2: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt2: <Generic cpufreq driver> on cpu2 >>> cpu3: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt3: <Generic cpufreq driver> on cpu3 >>> cpu4: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt4: <Generic cpufreq driver> on cpu4 >>> cpu5: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt5: <Generic cpufreq driver> on cpu5 >>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd00000= 0-0xfdffffff irq 6,7,8 on ofwbus0 >>> pcib0: Gen1 link training timeouted: 0x00080001. >>> pci0: <PCI bus> on pcib0 >>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0 >>> pcib0: failed to reserve resource for pcib1 >>> pcib1: failed to allocate initial memory window: 0-0xfffff >>> pci1: <PCI bus> on pcib1 >>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller = (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 >>> rockchip_dwmmc0: Hardware version ID is 270a >>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller = (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 >>> rockchip_dwmmc1: Hardware version ID is 270a >>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xf= e33ffff irq 12 on ofwbus0 >>> rk_emmcphy0: got emmcclk clock >>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, s= etting BROKEN_TIMEOUT quirk. >>> sdhci_fdt0: 1 slot(s) allocated >>> mmc0: <MMC/SD bus> on sdhci_fdt0 >>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on = ofwbus0 >>> usbus0: EHCI version 1.0 >>> usbus0 on ehci0 >>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on = ofwbus0 >>> usbus1 on ohci0 >>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on = ofwbus0 >>> usbus2: EHCI version 1.0 >>> usbus2 on ehci1 >>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on = ofwbus0 >>> usbus3 on ohci1 >>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 >>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on= rk_dwc30 >>> xhci0: 64 bytes context size, 32-bit DMA >>> usbus4: trying to attach >>> usbus4 on xhci0 >>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 >>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on= rk_dwc31 >>> xhci1: 64 bytes context size, 32-bit DMA >>> usbus5: trying to attach >>> usbus5 on xhci1 >>> iicbus0: <unknown card> at addr 0x22 >>> iic0: <I2C generic I/O> on iicbus0 >>> iic1: <I2C generic I/O> on iicbus1 >>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwb= us0 >>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwb= us0 >>> uart1: console (1500000,n,8,1) >>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 >>> spibus0: <OFW SPI bus> on spi0 >>> spibus0: <unknown card> at cs 0 mode 0 >>> iicbus2: <unknown card> at addr 0x82 >>> iic2: <I2C generic I/O> on iicbus2 >>> iicbus3: <unknown card> at addr 0x44 >>> iic3: <I2C generic I/O> on iicbus3 >>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 >>> pwmbus0: <OFW PWM bus> on pwm0 >>> pwmc0: <PWM Control> channel 0 on pwmbus0 >>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 >>> pwmbus1: <OFW PWM bus> on pwm1 >>> pwmc1: <PWM Control> channel 0 on pwmbus1 >>> gpioc0: <GPIO controller> on gpio0 >>> gpioc1: <GPIO controller> on gpio1 >>> gpioc2: <GPIO controller> on gpio2 >>> gpioc3: <GPIO controller> on gpio3 >>> gpioc4: <GPIO controller> on gpio4 >>> gpioled0: <GPIO LEDs> on ofwbus0 >>> cryptosoft0: <software crypto> >>> Timecounters tick every 1.000 msec >>> usbus0: 480Mbps High Speed USB v2.0 >>> usbus1: 12Mbps Full Speed USB v1.0 >>> usbus2: 480Mbps High Speed USB v2.0 >>> usbus3: 12Mbps Full Speed USB v1.0 >>> usbus4: 5.0Gbps Super Speed USB v3.0 >>> usbus5: 5.0Gbps Super Speed USB v3.0 >>> ugen3.1: <Generic OHCI root HUB> at usbus3 >>> uhub0 on usbus3 >>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on u= sbus3 >>> ugen2.1: <Generic EHCI root HUB> at usbus2 >>> uhub1 on usbus2 >>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on u= sbus2 >>> ugen1.1: <Generic OHCI root HUB> at usbus1 >>> uhub2 on usbus1 >>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on u= sbus1 >>> ugen0.1: <Generic EHCI root HUB> at usbus0 >>> uhub3 on usbus0 >>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on u= sbus0 >>> ugen5.1: <Synopsys XHCI root HUB> at usbus5 >>> uhub4 on usbus5 >>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus5 >>> ugen4.1: <Synopsys XHCI root HUB> at usbus4 >>> uhub5 on usbus4 >>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus4 >>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000>= at mmc0 25.0MHz/8bit/65535-block >>> mmcsd0boot0: 4MB partition 1 at mmcsd0 >>> mmcsd0boot1: 4MB partition 2 at mmcsd0 >>> mmcsd0rpmb: 17MB partition 3 at mmcsd0 >>> Release APs...done >>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 >>> Cache Type =3D <64 byte D-cacheline,64 byte I-ca= cheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL> >>> Instruction Set Attributes 1 =3D <> >>> Processor Features 0 =3D <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1= 32,EL0 32> >>> Processor Features 1 =3D <> >>> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b= it ASID,1TB PA> >>> Memory Model Features 1 =3D <8bit VMID> >>> Memory Model Features 2 =3D <32bit CCIDX,48bit VA> >>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... >>> Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 Brea= kpoints,PMUv3,Debugv8> >>> Debug Features 1 =3D <> >>> Auxiliary Features 0 =3D <> >>> Auxiliary Features 1 =3D <> >>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 >>> Cache Type =3D <64 byte D-cacheline,64 byte I-ca= cheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b= it ASID,1TB PA> >>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 >>> Cache Type =3D <64 byte D-cacheline,64 byte I-ca= cheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b= it ASID,1TB PA> >>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 >>> Cache Type =3D <64 byte D-cacheline,64 byte I-ca= cheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b= it ASID,1TB PA> >>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 >>> Cache Type =3D <64 byte D-cacheline,64 byte I-ca= cheline,PIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b= it ASID,16TB PA> >>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 >>> Cache Type =3D <64 byte D-cacheline,64 byte I-ca= cheline,PIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16b= it ASID,16TB PA> >>> WARNING: WITNESS option enabled, expect reduced performance. >>> Unresolved linked clock found: clkin_gmac >>> uhub0: 1 port with 1 removable, self powered >>> uhub2: 1 port with 1 removable, self powered >>> Warning: no time-of-day clock registered, system time will not be set= accurately >>> uhub4: 2 ports with 2 removable, self powered >>> uhub5: 2 ports with 2 removable, self powered >>> uhub3: 1 port with 1 removable, self powered >>> uhub1: 1 port with 1 removable, self powered >>> Setting hostuuid: 31323634-3737-6236-6162-336630376339. >>> Setting hostid: 0x5d4b60f9. >>> Starting file system checks: >>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS >>> /dev/mmcsd0p3: clean, 27264816 free (352 frags, 3408058 blocks, 0.0% = fragmentation) >>> lock order reversal: >>> 1st 0xffffa00062dabbe0 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_= mount.c:1724 >>> 2nd 0xffffa00062c9ddc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/= vfs_subr.c:2918 >>> lock order devfs -> ufs established at: >>> #0 0xffff000000569234 at witness_checkorder+0x448 >>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 >>> #2 0xffff00000075ad38 at ffs_lock+0x64 >>> #3 0xffff0000005ed57c at _vn_lock+0x54 >>> #4 0xffff0000005ce630 at vfs_domount+0xdf8 >>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4 >>> #6 0xffff0000005d0e78 at kernel_mount+0x4c >>> #7 0xffff0000005d3564 at parse_mount+0x49c >>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc >>> #9 0xffff00000048dc68 at start_init+0x24 >>> #10 0xffff0000004b7474 at fork_exit+0x7c >>> lock order ufs -> devfs attempted at: >>> #0 0xffff000000569a40 at witness_checkorder+0xc54 >>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50 >>> #2 0xffff0000005ed57c at _vn_lock+0x54 >>> #3 0xffff0000005d77d8 at vget_finish+0x4c >>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0 >>> #5 0xffff0000003b12c0 at devfs_root+0x44 >>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 >>> #7 0xffff0000005d89b0 at vflush+0x5c >>> #8 0xffff0000003b11c8 at devfs_unmount+0x34 >>> #9 0xffff0000005cf4c4 at dounmount+0x43c >>> #10 0xffff0000005cf040 at kern_unmount+0x2d8 >>> #11 0xffff000000812d0c at do_el0_sync+0x454 >>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90 >>> Mounting local filesystems:. >>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat >>> Setting hostname: kazu.tfc. >>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 >>> ukbd0 on uhub2 >>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr = 2> on usbus1 >>> kbd1 at ukbd0 >>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETH= ER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED >>> Feeding entropy: . >>> lo0: link state changed to UP >>> Starting Network: lo0. >>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >>> options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM= _IPV6> >>> inet6 ::1 prefixlen 128 >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 >>> inet 127.0.0.1 netmask 0xff000000 >>> groups: lo >>> nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> >>> Starting devd. >>> Autoloading module: mx25l.ko >>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, eras= e size 4K >>> Autoloading module: pwm_backlight.ko >>> link_elf: symbol backlight_get_info_desc undefined >>> kldload: can't load pwm_backlight.ko: No such file or directory >>> Autoloading module: uhid.ko >>> Autoloading module: wmt.ko >>> add host 127.0.0.1: gateway lo0 fib 0: route already in table >>> route: writing to routing socket: Network is unreachable >>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable >>> add host ::1: gateway lo0 fib 0: route already in table >>> add net fe80::: gateway ::1 >>> add net ff02::: gateway ::1 >>> add net ::ffff:0.0.0.0: gateway ::1 >>> add net ::0.0.0.0: gateway ::1 >>> Updating /var/run/os-release done. >>> Creating and/or trimming log files. >>> Updating motd:. >>> Clearing /tmp (X related). >>> Starting syslogd. >>> No core dumps found. >>> Mounting late filesystems:. >>> Security policy loaded: MAC/ntpd (mac_ntpd) >>> Starting ntpd. >>> Feb 3 18:00:15 kazu ntpd[1004]: leapsecond file ('/var/db/ntpd.leap-= seconds.list'): expired 38 days ago >>> Performing sanity check on sshd configuration. >>> Starting sshd. >>> Starting cron. >>> Starting sendmail. >>> Starting sendmail_msp_queue. >>> Configuring vt: blanktime screensaverFeb 3 18:00:16 kazu ntpd[1004]:= error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8) >>> kldload: can't load logo_saver: No such file or directory >>> /etc/rc: WARNING: Unable to load kernel module logo_saver >>> . >>> Starting background file system checks in 60 seconds. >>> >>> Wed Feb 3 18:00:16 JST 2021 >>> >>> FreeBSD/arm64 (kazu.tfc) (ttyu1) >>> >>> login: >>> >>> >>> [1] https://github.com/TrueFC/ports/tree/master/sysutils/u-boot-pineb= ook-pro >>>> the twitter thread >>>> https://twitter.com/jsm22413542/status/1355896239104159748 >>>> >>>> Long story short I keep CPLL at 800000000 but set ACLK_VOP1 at 59400= 0000.. >>>> >>>> >>>> /Jsm >>>> >>>> _______________________________________________ >>>> freebsd-arm@freebsd.org mailing list >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.or= g" >>>> >>> --- >>> Kazuhiko Kiriyama <kiri@truefc.org> >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"= >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36699f90-fadd-86db-d6ee-62fadc0caf95>