Date: Sun, 11 Jul 1999 11:52:44 +0200 From: sthaug@nethelp.no To: freebsd-smp@freebsd.org Subject: 3.2-STABLE up & running on Abit BP6 (dual Celeron socket370) Message-ID: <37674.931686764@verdi.nethelp.no>
next in thread | raw e-mail | index | archive | help
Bought myself an Abit BP6 board and a couple of Celeron 366 processors
the other day. This is a dual socket 370 board - Intel of course doesn't
want you to do this, but it makes for a very nice and inexpensive MP
platform. Been running very smoothly so far, and it's now happily doing
a buildworld.
Below you'll find dmesg and mptable for the system.
Steinar Haug, Nethelp consulting, sthaug@nethelp.no
----------------------------------------------------------------------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-19990708-STABLE #1: Sun Jul 11 11:09:03 CEST 1999
sthaug@celery.nethelp.no:/usr/src/sys/compile/CELERY_MP
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
avail memory = 258351104 (252296K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x03 int a irq 17 on pci0.13.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x04 int a irq 16 on pci0.15.0
fxp0: Ethernet address 00:a0:c9:b6:df:4b
Probing for devices on PCI bus 1:
vga0: <ATI model 4742 graphics accelerator> rev 0x5c int a irq 16 on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <IBM-DTTA-351010>, DMA, 32-bit, multi-block-16
wd0: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 3 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
changing root device to wd0s1a
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
ffs_mountfs: superblock updated for soft updates
----------------------------------------------------------------------
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f5b30
signature: '_MP_'
length: 16 bytes
version: 1.1
checksum: 0x80
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f1400
signature: 'PCMP'
base table length: 260
version: 1.1
checksum: 0xfd
OEM ID: 'OEM00000'
Product ID: 'PROD00000000'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 24
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 6 6 5 0xfbff
1 0x11 AP, usable 6 6 5 0xfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 2 0 2 0
INT conforms conforms 2 1 2 1
INT conforms conforms 2 0 2 2
INT conforms conforms 2 3 2 3
INT conforms conforms 2 4 2 4
INT conforms conforms 2 6 2 6
INT conforms conforms 2 7 2 7
INT active-hi edge 2 8 2 8
INT conforms conforms 2 9 2 9
INT conforms conforms 2 13 2 13
INT conforms conforms 2 14 2 14
INT conforms conforms 2 15 2 15
INT active-lo level 2 10 2 16
INT active-lo level 2 12 2 17
INT active-lo level 2 11 2 18
INT active-lo level 2 5 2 19
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 2 0 255 0
NMI conforms conforms 2 0 255 1
-------------------------------------------------------------------------------
# SMP kernel config file options:
# Required:
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optional (built-in defaults will work in most cases):
#options NCPU=2 # number of CPUs
#options NBUS=3 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
===============================================================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37674.931686764>