Date: Wed, 15 Sep 1999 00:28:07 -0500 From: Kris Kirby <kris@airnet.net> To: "Kenneth D. Merry" <ken@kdm.org> Cc: scsi@freebsd.org Subject: Re: Reformatting a 520-byte-per-sector drive Message-ID: <37DF2E67.B9F54D28@airnet.net> References: <199909150229.UAA39212@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Kenneth D. Merry wrote: > > Kris Kirby wrote... > > Kenneth D. Merry wrote: > > > > > > > # camcontrol cmd da1 -v -c "1A 0 3 0 c 0" -i 0xc "i1 i1 i1 i1 i1 i3 i1 i3" > > > > > 35 0 16 8 1 1052654 0 512 > > > > This spits out the appropriate answer. > > #root:orgy: {17} camcontrol cmd da0 -v -c "1A 0 3 0 c 0" -i 0xc "i1 i1 > > i1 i1 i1 i3 i1 i3" > > 35 0 16 8 0 1931265 0 520 > > Good. > > > > > > The last 3-byte integer is the block size. So, in theory, I suppose you > > > > > could change the blocksize by doing something like this: > > > > > > > # camcontrol cmd da1 -v -c "15 10 0 0 c 0" -o 0xc "b 0 0 8 0 0:i3 0 v:i3" 512 > > > > > [ of course you'd substitute "da3" for "da1" above ] > > > > This sets it properly, but when chased with a format, doesn't do > > anything. (Except format the drive. :-) > > Hmm...so the setting doesn't stick? > > > > > What would be the proper command to change the number of blocks? Docs > > > > say it needs both. > > > > > > Well, in that case, you'd do this I think: > > > > > > # camcontrol cmd da3 -v -c "15 10 0 0 c 0" -o 0xc "b 0 0 8 0 v:i3 0 v:i3" xxxx 512 > > > > > > Where the 'xxxx' is the number of 512 byte blocks. > > > > #root:orgy: {15} camcontrol cmd da0 -v -c "15 10 0 0 c 0" -o 0xc "b 0 0 > > 8 0 v:i3 0 v:i3" 1962030 512 > > camcontrol: error sending command > > (pass0:aha0:0:0:0): MODE SELECT(06). CDB: 15 10 0 0 c 0 > > (pass0:aha0:0:0:0): ILLEGAL REQUEST asc:26,0 > > (pass0:aha0:0:0:0): Invalid field in parameter list sks:80,0 > > Well, I neglected the fact that the length parameter in the mode page > header is reserved for mode select. The above error is pointing to the > first byte in the parameter list. So, try this instead: > > camcontrol cmd da0 -v -c "15 10 0 0 c 0" -o 0xc "0 0 0 8 0 v:i3 0 v:i3" 1962030 512 > Good deal. Let me know whether this works. As of now, it is running this command. Until the machine hangs... (I have a bad widdle 1542CF. But three good 1542Bs. Well, the CF is the only one with a BIOS more intelligent than mud. :-) -- Kris Kirby <kris@airnet.net> ------------------------------------------- TGIFreeBSD... 'Nuff said. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37DF2E67.B9F54D28>