Date: Fri, 30 Jun 2000 13:29:57 +0200 From: "F. Heinrichmeyer" <fritz.heinrichmeyer@fernuni-hagen.de> To: freebsd-stable <freebsd-stable@FreeBSD.ORG> Subject: error message xl0: transmission error: 90 Message-ID: <395C84B5.B39742AE@fernuni-hagen.de>
next in thread | raw e-mail | index | archive | help
What can i do against the following messages (dmesg): xl0: transmission error: 90 xl0: tx underrun, increasing tx start threshold to 120 bytes xl0: transmission error: 90 xl0: tx underrun, increasing tx start threshold to 180 bytes they nag me since i used freebsd-3.0 but everything else seems to work ... Here is the full dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-STABLE #0: Wed Jun 28 11:46:35 CEST 2000 root@es-i2.fernuni-hagen.de:/usr/obj/usr/src/sys/ES-I2.smp Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (265.26-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX> real memory = 268435456 (262144K bytes) avail memory = 257863680 (251820K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0323000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <Intel PIIX3 ATA controller> at 7.1 pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 10.0 irq 16 xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xef00-0xef3f irq 19 at device 11.0 on pci0 xl0: Ethernet address: 00:60:08:0b:b0:a5 miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: supplying EUI64: 00:60:08:ff:fe:0b:b0:a5 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xec00-0xecff mem 0xfebfb000-0xfebfbfff irq 16 at device 14.0 on pci0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! da0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM XP39100W LYK8> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: <QUANTUM XP39100W LXY4> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8682MB (17781520 512 byte sectors: 255H 63S/T 1106C) Mounting root from ufs:/dev/da0s1a cd0 at ahc0 bus 0 target 3 lun 0 cd0: <TEAC CD-ROM CD-516S 1.0G> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present xl0: transmission error: 90 xl0: tx underrun, increasing tx start threshold to 120 bytes xl0: transmission error: 90 xl0: tx underrun, increasing tx start threshold to 180 bytes -- Fritz Heinrichmeyer mailto:fritz.heinrichmeyer@fernuni-hagen.de FernUniversitaet Hagen, LG ES, 58084 Hagen (Germany) tel:+49 2331/987-1166 fax:987-355 http://www-es.fernuni-hagen.de/~jfh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?395C84B5.B39742AE>