Date: Fri, 01 Sep 2000 14:37:56 -0500 From: Doc Shipley <drdoc@mail.utexas.edu> To: FBSD <freebsd-stable@FreeBSD.ORG> Subject: 18G LVD drive not recognized Message-ID: <39B00594.58ED3E21@mail.utexas.edu>
next in thread | raw e-mail | index | archive | help
I posted this question a couple of days ago, but haven't found any
answers. I did find a PR (15356) that's similar, but no fix. I've also
tried v4.1-2000829-STABLE, with the same result.
SCSI adapter:
Tekram DC390U2W (NCR53c895 chipset)
ID Device
0,0 9G IBM LVD (1115C, 255H, 63S)
0,1 18G IBM LVD (2212C, 255H, 63S)
0,2 9G Seagate LVD (1106S, 255H, 63S)
0,3 Archive 4G DDS2
0,4 Iomega 100m ZIP
0,5 Plextor PX32TS CD-ROM
0,6 TEAC R55S CD-R
I have FBSD 4.1-STABLE installed & running on the IBM 9G (0,0), Linux
on
the rest of that drive, NT4 on the Seagate (0,2) and Be on the first
partition
partition of the 18G. Linux, NT, and Be all recognize the 18G IBM, and
Linux
mounts partitions on it.
FreeBSD does not recognize the drive in any way, during install or the
running system. Available drives are:
/dev/da0 9G IBM
/dev/da1 9G Seagate
/dev/da2 100m Iomega ZIP
The hardware is all jumpered correctly, there are no ID conflicts, and
the
Tekram BIOS is set to factory defaults.
Has anyone seen this? Is there a solution?
I'm also stuck for a way to scan the SCSI bus in FBSD. What's the
equivalent of Linux' "cat /proc/scsi/scsi" or "scsiinfo"?
Thanks.
--
Doc Shipley
Network Stuff
Austin, Earth
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39B00594.58ED3E21>