Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 25 Apr 2012 16:15:55 +0200
From:      Fabien Thomas <fabien.thomas@netasq.com>
To:        freebsd-arm@freebsd.org
Cc:        hps@freebsd.org
Subject:   Dreamplug : USB support
Message-ID:  <39ED732B-A88A-4052-976D-CB13F0CB1C0C@netasq.com>

next in thread | raw e-mail | index | archive | help

--Apple-Mail=_6536D8CE-12F5-48D1-A5AD-EC0E024C7712
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	charset=us-ascii

	Hi,

It seems that sometimes USB works on Dreamplug and sometimes not.

I've included a working dmesg and a full debug output of the non-working =
boot.
I've tried to increase the timeout in usb.h but without success.

Maybe someone will have a clue for  this problem ?

Fabien

Success:

uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x1a40> at usbus0
uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on =
usbus0
Root mount waiting for: usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.3: <vendor 0x05e3> at usbus0
umass0: <vendor 0x05e3 USB Storage, class 0/0, rev 2.00/99.10, addr 3> =
on usbus0
umass0:  SCSI over Bulk-Only; quirks =3D 0x4000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Generic STORAGE DEVICE 9910> Removable Direct Access SCSI-0 device=20=

da0: 40.000MB/s transfers
da0: 3724MB (7626752 512 byte sectors: 255H 63S/T 474C)
(probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0=20
(probe0:umass-sim0:0:0:1): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:1): SCSI status: Check Condition
(probe0:umass-sim0:0:0:1): SCSI sense: UNIT ATTENTION asc:28,0 (Not =
ready to ready change, medium may have changed)
da1 at umass-sim0 bus 0 scbus0 target 0 lun 1
da1: <Generic STORAGE DEVICE 9910> Removable Direct Access SCSI-0 device=20=

da1: 40.000MB/s transfers
da1: 30959MB (63404032 512 byte sectors: 255H 63S/T 3946C)
ugen0.4: <vendor 0x0d8c> at usbus0
Trying to mount root from ufs:/dev/ufs/dreamplug

Failure:

usb_needs_explore:=20
usb_needs_explore: No root HUB
usb_process: Message pm=3D0xc34eadac, cb=3D0xc0967474 (enter)
usbus0: 480Mbps High Speed USB v2.0
usb_alloc_device: parent_dev=3D0xc3500b80, bus=3D0xc34eac78, =
parent_hub=3D0, depth=3D0, port_index=3D0, port_no=3D1, speed=3D3, =
usb_mode=3D0
usb_set_device_state: udev 0xc3686c00 state DETACHED -> POWERED
usbd_req_set_address: setting device address=3D1
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x00 =
bRequest=3D0x05 wValue=3D0x0001 wIndex=3D0x0000 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
ad0: 70911MB <WDC WD740GD-00FLC0 33.08F33> at ata0-master UDMA100 SATA =
1.5Gb/s
usb_set_device_state: udev 0xc3686c00 state POWERED -> ADDRESSED
usbd_setup_device_desc: Minimum MaxPacketSize is large enough to hold =
the complete device descriptor
usbd_req_get_device_desc:=20
usbd_req_get_desc: id=3D0, type=3D1, index=3D0, max_len=3D18
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0100 wIndex=3D0x0000 wLength=3D0x0012
usbd_do_request_flags: Handle Request function is set
usbd_setup_device_desc: adding unit addr=3D1, rev=3D200, class=3D9, =
subclass=3D0, protocol=3D1, maxpacket=3D64, len=3D18, speed=3D3
usbd_req_get_desc: id=3D0, type=3D3, index=3D0, max_len=3D4
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0300 wIndex=3D0x0000 wLength=3D0x0002
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0300 wIndex=3D0x0000 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
usb_alloc_device: Using first language
usb_alloc_device: Language selected: 0x0001
usbd_req_get_desc: id=3D1, type=3D3, index=3D1, max_len=3D255
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0301 wIndex=3D0x0001 wLength=3D0x0002
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0301 wIndex=3D0x0001 wLength=3D0x0010
usbd_do_request_flags: Handle Request function is set
usbd_req_get_desc: id=3D1, type=3D3, index=3D2, max_len=3D255
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0302 wIndex=3D0x0001 wLength=3D0x0002
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0302 wIndex=3D0x0001 wLength=3D0x001c
usbd_do_request_flags: Handle Request function is set
usb_alloc_device: setting config 0
usbd_set_config_index: udev=3D0xc3686c00 index=3D0
usb_detach_device: udev=3D0xc3686c00
usb_cdev_free: Freeing device nodes
usb_config_parse: iface_index=3D255 cmd=3D1
usbd_req_get_config_desc_full: index=3D0
usbd_req_get_config_desc: confidx=3D0
usbd_req_get_desc: id=3D0, type=3D2, index=3D0, max_len=3D9
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0200 wIndex=3D0x0000 wLength=3D0x0009
usbd_do_request_flags: Handle Request function is set
usbd_req_get_desc: id=3D0, type=3D2, index=3D0, max_len=3D25
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0200 wIndex=3D0x0000 wLength=3D0x0019
usbd_do_request_flags: Handle Request function is set
usbd_set_config_index: udev=3D0xc3686c00 cdesc=3D0xc34e5520 (addr 1) =
cno=3D1 attr=3D0x40, selfpowered=3D1, power=3D0
usb_set_device_state: udev 0xc3686c00 state ADDRESSED -> CONFIGURED
usbd_req_set_config: setting config 1
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x00 =
bRequest=3D0x09 wValue=3D0x0001 wIndex=3D0x0000 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usb_config_parse: iface_index=3D255 cmd=3D0
usb_config_parse: found idesc nendpt=3D1
usb_config_parse: iface_index=3D255 cmd=3D2
usb_config_parse: found idesc nendpt=3D1
usb_cdev_create: Creating device nodes
usbd_set_config_index: error=3DUSB_ERR_NORMAL_COMPLETION
usb_detach_device: udev=3D0xc3686c00
usb_alloc_device: new dev (addr 1), udev=3D0xc3686c00, parent_hub=3D0
usb_bus_port_set_device: bus 0xc34eac78 devices[1] =3D 0xc3686c00
ugen0.1: <Marvell> at usbus0
usb_probe_and_attach: iclass=3D9/0/0 iindex=3D0/0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus0
uhub_attach: depth=3D0 selfpowered=3D1, parent=3D0, =
parent->selfpowered=3D0
uhub_attach: Getting HUB descriptor
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa0 =
bRequest=3D0x06 wValue=3D0x2900 wIndex=3D0x0000 wLength=3D0x0009
usbd_do_request_flags: Handle Request function is set
GEOM: ad0s2: geometry does not match label (255h,63s !=3D 16h,63s).
GEOM: ufsid/4eb8e3d67ec8647c: geometry does not match label (255h,63s !=3D=
 16h,63s).
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x03 wValue=3D0x0008 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
uhub_attach: turn on port 1 power
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D0
uhub0: 1 port with 1 removable, self powered
usb_needs_explore:=20
usb_proc_msignal:  t=3D1, num=3D1
usb_probe_and_attach: end of interfaces at 1
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
usb_process: Message pm=3D0xc34eadac (leave)
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0001,=
 err=3DUSB_ERR_NORMAL_COMPLETION
uhub_reattach_port: reattaching port 1
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0010 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
uhub_reattach_port: Port 1 is in Host Mode
usbd_req_reset_port:=20
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0014 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x03 wValue=3D0x0004 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
Root mount waiting for: usbus0
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0014 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_req_reset_port: port 1 reset returning =
error=3DUSB_ERR_NORMAL_COMPLETION
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0303, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_alloc_device: parent_dev=3D0xc3461a00, bus=3D0xc34eac78, =
parent_hub=3D0xc3686c00, depth=3D1, port_index=3D0, port_no=3D1, =
speed=3D1, usb_mode=3D0
usb_set_device_state: udev 0xc368d000 state DETACHED -> POWERED
usbd_req_set_address: setting device address=3D2
usbd_do_request_flags: udev=3D0xc368d000 bmRequestType=3D0x00 =
bRequest=3D0x05 wValue=3D0x0002 wIndex=3D0x0000 wLength=3D0x0000
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371f044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=3D0
usbd_transfer_submit: xfer=3D0xc371f0b0, endpoint=3D0xc368d08c, =
nframes=3D1, dir=3Dwrite
usb_dump_endpoint: endpoint=3D0xc368d08c edesc=3D0xc368d34c isoc_next=3D0 =
toggle_next=3D0 bEndpointAddress=3D0x00
usb_dump_queue: endpoint=3D0xc368d08c xfer:=20
usbd_transfer_submit: open
usbd_transfer_power_ref: Adding type 0 to power state
usbd_transfer_power_ref: needs power
usb_command_wrapper: cb 0xc371f0b0 (enter)
usb_command_wrapper: cb 0xc371f0b0 (leave)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_pipe_enter: enter
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_pipe_start: start
usb_command_wrapper: cb 0xc371f0b0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371f044 (leave)
usbd_transfer_done: err=3DUSB_ERR_STALLED
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371f044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=3D0xc371f0b0 endpoint=3D0xc368d08c =
sts=3D22 alen=3D0, slen=3D8, afrm=3D1, nfrm=3D1
usbd_do_request_callback: st=3D2
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371f044 (leave)
usbd_transfer_stop: close
usbd_transfer_done: err=3DUSB_ERR_CANCELLED
usbd_transfer_done: not transferring
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
Root mount waiting for: usbus0
usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored)
usb_set_device_state: udev 0xc368d000 state POWERED -> ADDRESSED
usbd_req_get_desc: id=3D0, type=3D1, index=3D0, max_len=3D8
usbd_do_request_flags: udev=3D0xc368d000 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0100 wIndex=3D0x0000 wLength=3D0x0008
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371e044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=3D0
usbd_transfer_submit: xfer=3D0xc371e0b0, endpoint=3D0xc368d08c, =
nframes=3D2, dir=3Dwrite
usb_dump_endpoint: endpoint=3D0xc368d08c edesc=3D0xc368d34c isoc_next=3D0 =
toggle_next=3D1 bEndpointAddress=3D0x00
usb_dump_queue: endpoint=3D0xc368d08c xfer:=20
usbd_transfer_submit: open
usb_command_wrapper: cb 0xc371e0b0 (enter)
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_pipe_enter: enter
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_pipe_start: start
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371e044 (leave)
usbd_transfer_done: err=3DUSB_ERR_STALLED
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371e044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=3D0xc371e0b0 endpoint=3D0xc368d08c =
sts=3D22 alen=3D0, slen=3D16, afrm=3D1, nfrm=3D2
usbd_do_request_callback: st=3D2
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371e044 (leave)
usbd_transfer_stop: close
usbd_transfer_done: err=3DUSB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_setup_device_desc: getting device descriptor at addr 2 failed, =
USB_ERR_STALLED
usbd_req_re_enumerate: Trying to reset parent High Speed TT.
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x09 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_req_reset_port:=20
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0014 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x03 wValue=3D0x0004 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0014 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
Root mount waiting for: usbus0
usbd_req_reset_port: port 1 reset returning =
error=3DUSB_ERR_NORMAL_COMPLETION
usb_set_device_state: udev 0xc368d000 state ADDRESSED -> POWERED
usbd_req_set_address: setting device address=3D2
usbd_do_request_flags: udev=3D0xc368d000 bmRequestType=3D0x00 =
bRequest=3D0x05 wValue=3D0x0002 wIndex=3D0x0000 wLength=3D0x0000
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371e044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=3D0
usbd_transfer_submit: xfer=3D0xc371e0b0, endpoint=3D0xc368d08c, =
nframes=3D1, dir=3Dwrite
usb_dump_endpoint: endpoint=3D0xc368d08c edesc=3D0xc368d34c isoc_next=3D0 =
toggle_next=3D1 bEndpointAddress=3D0x00
usb_dump_queue: endpoint=3D0xc368d08c xfer:=20
usbd_transfer_submit: open
usb_command_wrapper: cb 0xc371e0b0 (enter)
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_pipe_enter: enter
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_pipe_start: start
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371e044 (leave)
usbd_transfer_done: err=3DUSB_ERR_STALLED
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371e044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=3D0xc371e0b0 endpoint=3D0xc368d08c =
sts=3D22 alen=3D0, slen=3D8, afrm=3D1, nfrm=3D1
usbd_do_request_callback: st=3D2
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371e044 (leave)
usbd_transfer_stop: close
usbd_transfer_done: err=3DUSB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_STALLED, =
ignored)
usbd_req_get_desc: id=3D0, type=3D1, index=3D0, max_len=3D8
usbd_do_request_flags: udev=3D0xc368d000 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0100 wIndex=3D0x0000 wLength=3D0x0008
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371f044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=3D0
usbd_transfer_submit: xfer=3D0xc371f0b0, endpoint=3D0xc368d08c, =
nframes=3D2, dir=3Dwrite
usb_dump_endpoint: endpoint=3D0xc368d08c edesc=3D0xc368d34c isoc_next=3D0 =
toggle_next=3D1 bEndpointAddress=3D0x00
usb_dump_queue: endpoint=3D0xc368d08c xfer:=20
usbd_transfer_submit: open
usb_command_wrapper: cb 0xc371f0b0 (enter)
usb_command_wrapper: cb 0xc371f0b0 (leave)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usb_command_wrapper: cb 0xc371f0b0 (leave)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_pipe_enter: enter
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_pipe_start: start
usb_command_wrapper: cb 0xc371f0b0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371f044 (leave)
usbd_transfer_done: err=3DUSB_ERR_STALLED
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371f044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=3D0xc371f0b0 endpoint=3D0xc368d08c =
sts=3D22 alen=3D0, slen=3D16, afrm=3D1, nfrm=3D2
usbd_do_request_callback: st=3D2
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371f044 (leave)
usbd_transfer_stop: close
usbd_transfer_done: err=3DUSB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_setup_device_desc: getting device descriptor at addr 2 failed, =
USB_ERR_STALLED
Root mount waiting for: usbus0
usbd_req_re_enumerate: Trying to reset parent High Speed TT.
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x09 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_req_reset_port:=20
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0014 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x03 wValue=3D0x0004 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0014 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usbd_req_reset_port: port 1 reset returning =
error=3DUSB_ERR_NORMAL_COMPLETION
usb_set_device_state: udev 0xc368d000 state POWERED -> POWERED
usbd_req_set_address: setting device address=3D2
usbd_do_request_flags: udev=3D0xc368d000 bmRequestType=3D0x00 =
bRequest=3D0x05 wValue=3D0x0002 wIndex=3D0x0000 wLength=3D0x0000
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371f044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=3D0
usbd_transfer_submit: xfer=3D0xc371f0b0, endpoint=3D0xc368d08c, =
nframes=3D1, dir=3Dwrite
usb_dump_endpoint: endpoint=3D0xc368d08c edesc=3D0xc368d34c isoc_next=3D0 =
toggle_next=3D1 bEndpointAddress=3D0x00
usb_dump_queue: endpoint=3D0xc368d08c xfer:=20
usbd_transfer_submit: open
usb_command_wrapper: cb 0xc371f0b0 (enter)
usb_command_wrapper: cb 0xc371f0b0 (leave)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_pipe_enter: enter
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_pipe_start: start
usb_command_wrapper: cb 0xc371f0b0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371f044 (leave)
usbd_transfer_done: err=3DUSB_ERR_STALLED
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371f044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371f0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=3D0xc371f0b0 endpoint=3D0xc368d08c =
sts=3D22 alen=3D0, slen=3D8, afrm=3D1, nfrm=3D1
usbd_do_request_callback: st=3D2
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371f044 (leave)
usbd_transfer_stop: close
usbd_transfer_done: err=3DUSB_ERR_CANCELLED
usbd_transfer_done: not transferring
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3D2, set address failed! (USB_ERR_STALLED, =
ignored)
usbd_req_get_desc: id=3D0, type=3D1, index=3D0, max_len=3D8
usbd_do_request_flags: udev=3D0xc368d000 bmRequestType=3D0x80 =
bRequest=3D0x06 wValue=3D0x0100 wIndex=3D0x0000 wLength=3D0x0008
usb_needs_explore:=20
usb_proc_msignal:  t=3D3, num=3D1
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usbd_get_endpoint: udev=3D0xc368d000 iface_index=3D0 address=3D0x0 =
type=3D0x0 dir=3D0xff index=3D0
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371e044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_do_request_callback: st=3D0
usbd_transfer_submit: xfer=3D0xc371e0b0, endpoint=3D0xc368d08c, =
nframes=3D2, dir=3Dwrite
usb_dump_endpoint: endpoint=3D0xc368d08c edesc=3D0xc368d34c isoc_next=3D0 =
toggle_next=3D1 bEndpointAddress=3D0x00
usb_dump_queue: endpoint=3D0xc368d08c xfer:=20
usbd_transfer_submit: open
usb_command_wrapper: cb 0xc371e0b0 (enter)
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_pipe_enter: enter
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_pipe_start: start
usb_command_wrapper: cb 0xc371e0b0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371e044 (leave)
usbd_transfer_done: err=3DUSB_ERR_STALLED
usb_proc_msignal:  t=3D0, num=3D0
usb_process: Message pm=3D0xc371e044, cb=3D0xc098296c (enter)
usb_command_wrapper: cb 0xc371e0b0 (enter)
usbd_callback_wrapper: case 1-4
usbd_callback_wrapper_sub: xfer=3D0xc371e0b0 endpoint=3D0xc368d08c =
sts=3D22 alen=3D0, slen=3D16, afrm=3D1, nfrm=3D2
usbd_do_request_callback: st=3D2
usb_command_wrapper: cb 0 (leave)
usb_process: Message pm=3D0xc371e044 (leave)
usbd_transfer_stop: close
usbd_transfer_done: err=3DUSB_ERR_CANCELLED
usbd_transfer_done: not transferring
usbd_setup_device_desc: getting device descriptor at addr 2 failed, =
USB_ERR_STALLED
usb_free_device: udev=3D0xc368d000 port=3D1
usb_set_device_state: udev 0xc368d000 state POWERED -> DETACHED
ugen0.2: <Unknown> at usbus0 (disconnected)
usb_bus_port_set_device: bus 0xc34eac78 devices[0] =3D 0
usb_detach_device: udev=3D0xc368d000
usb_cdev_free: Freeing device nodes
usb_config_parse: iface_index=3D255 cmd=3D1
uhub_reattach_port: could not allocate new device
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0x23 =
bRequest=3D0x01 wValue=3D0x0001 wIndex=3D0x0001 wLength=3D0x0000
usbd_do_request_flags: Handle Request function is set
usb_process: Message pm=3D0xc34ead5c (leave)
usb_process: Message pm=3D0xc34ead70, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead70 (leave)
Trying to mount root from ufs:/dev/ufs/dreamplug
GEOM: ufsid/4eb8e3d67ec8647c: geometry does not match label (255h,63s !=3D=
 16h,63s).
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)
usb_needs_explore:=20
usb_proc_msignal:  t=3D0, num=3D1
usb_process: Message pm=3D0xc34ead5c, cb=3D0xc0967708 (enter)
usb_bus_powerd: bus=3D0xc34eac78
usb_bus_powerd: Recomputing power masks
usbd_do_request_flags: udev=3D0xc3686c00 bmRequestType=3D0xa3 =
bRequest=3D0x00 wValue=3D0x0000 wIndex=3D0x0001 wLength=3D0x0004
usbd_do_request_flags: Handle Request function is set
uhub_read_port_status: port 1, wPortStatus=3D0x0301, wPortChange=3D0x0000,=
 err=3DUSB_ERR_NORMAL_COMPLETION
usb_process: Message pm=3D0xc34ead5c (leave)=

--Apple-Mail=_6536D8CE-12F5-48D1-A5AD-EC0E024C7712--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39ED732B-A88A-4052-976D-CB13F0CB1C0C>