Date: Sun, 22 Oct 2000 01:33:57 -0400 From: "E. J. Cerejo" <ecerejo@idt.net> To: freebsd-questions@FreeBSD.org Subject: PPP help please Message-ID: <39F27C45.9080907@idt.net>
next in thread | raw e-mail | index | archive | help
I've installed FreeBSD 4.1.1, and now I'm fighting with myself to setup
this ppp thing, I've read the chapter in the manual and still can't get it
to work, it dials out and I get all of these as it logs on: ppP, pPP, PPP
OK and I get lost on how to get back to my regular prompt so I can use lynx
and I've pressing Ctrl+Z and that suspends it and gets me back to the
prompt but I can't ping anybody, I can't do nslookup or ftp or anything it
just hangs there. On the bottom there's a copy of all the files that
edited, any help would be greatly appreciated.
MY ppp.log:
Oct 21 18:00:00 ecerejo newsyslog[337]: logfile turned over
Oct 21 18:12:12 ecerejo ppp[206]: Phase: Using interface: tun0
Oct 21 18:12:12 ecerejo ppp[206]: Phase: deflink: Created in closed state
Oct 21 18:12:12 ecerejo ppp[206]: Warning: Carrier: Invalid log value
Oct 21 18:12:12 ecerejo ppp[206]: Warning: Usage: set log [local] [+|-]
async|cbcp|ccp|chat|command|connect|debug|dns|hdlc|id0
|ipcp|lcp|lqm|phase|physical|sync|tcp/ip|timer|tun...
Oct 21 18:12:12 ecerejo ppp[206]: Command: default: set speed 115200
Oct 21 18:12:12 ecerejo ppp[206]: Command: default: set dial ABORT BUSY
ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T
TIMEOUT 40 CONNECT
Oct 21 18:12:12 ecerejo ppp[206]: Command: default: set ifaddr 10.0.0.1/0
10.0.0.2/0 255.255.255.0 0.0.0.0
Oct 21 18:12:12 ecerejo ppp[206]: Command: default: set timeout 120
Oct 21 18:12:12 ecerejo ppp[206]: Command: default: add default HISADDR
Oct 21 18:12:12 ecerejo ppp[206]: Command: default: enable dns
Oct 21 18:12:12 ecerejo ppp[206]: Command: default: alias enable yes
Oct 21 18:12:12 ecerejo ppp[206]: Command: idt: set phone 9960976
Oct 21 18:12:12 ecerejo ppp[206]: Command: idt: set authname ecerejo
Oct 21 18:12:12 ecerejo ppp[206]: Command: idt: set authkey ********
Oct 21 18:12:12 ecerejo ppp[206]: Command: idt: set openmode active
Oct 21 18:12:12 ecerejo ppp[207]: Phase: PPP Started (auto mode).
Oct 21 18:12:29 ecerejo ppp[208]: Phase: Using interface: tun1
Oct 21 18:12:29 ecerejo ppp[208]: Phase: deflink: Created in closed state
Oct 21 18:12:29 ecerejo ppp[208]: Warning: Carrier: Invalid log value
Oct 21 18:12:29 ecerejo ppp[208]: Warning: Usage: set log [local] [+|-]
async|cbcp|ccp|chat|command|connect|debug|dns|hdlc|id0
|ipcp|lcp|lqm|phase|physical|sync|tcp/ip|timer|tun...
Oct 21 18:12:29 ecerejo ppp[208]: Command: default: set speed 115200
Oct 21 18:12:29 ecerejo ppp[208]: Command: default: set dial ABORT BUSY
ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T
TIMEOUT 40 CONNECT
Oct 21 18:12:29 ecerejo ppp[208]: Command: default: set ifaddr 10.0.0.1/0
10.0.0.2/0 255.255.255.0 0.0.0.0
Oct 21 18:12:29 ecerejo ppp[208]: Command: default: set timeout 120
Oct 21 18:12:29 ecerejo ppp[208]: Command: default: add default HISADDR
Oct 21 18:12:29 ecerejo ppp[208]: Warning: Add route failed: default
already exists
Oct 21 18:12:29 ecerejo ppp[208]: Command: default: enable dns
Oct 21 18:12:29 ecerejo ppp[208]: Command: default: alias enable yes
Oct 21 18:12:29 ecerejo ppp[208]: Phase: PPP Started (interactive mode).
Oct 21 18:12:44 ecerejo ppp[208]: Command: /dev/tty: dial idt -auto
Oct 21 18:12:47 ecerejo ppp[208]: Command: /dev/tty: dial idt
Oct 21 18:12:47 ecerejo ppp[208]: Command: idt: set phone 9960976
Oct 21 18:12:47 ecerejo ppp[208]: Command: idt: set authname ecerejo
Oct 21 18:12:47 ecerejo ppp[208]: Command: idt: set authkey ********
Oct 21 18:12:47 ecerejo ppp[208]: Command: idt: set openmode active
Oct 21 18:12:47 ecerejo ppp[208]: Phase: bundle: Establish
Oct 21 18:12:47 ecerejo ppp[208]: Phase: deflink: closed -> opening
Oct 21 18:12:47 ecerejo ppp[208]: Phase: deflink: Connected!
Oct 21 18:12:47 ecerejo ppp[208]: Phase: deflink: opening -> dial
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Phone: 9960976
Oct 21 18:12:47 ecerejo ppp[208]: Chat: deflink: Dial attempt 1 of 1
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Send: AT^M
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Expect(5): OK
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Received: AT^M^M
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Received: OK^M
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Send: ATE1Q0^M
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Expect(5): OK
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Received: ATE1Q0^M^M
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Received: OK^M
Oct 21 18:12:47 ecerejo ppp[208]: Chat: Send: ATDT9960976^M
Oct 21 18:12:49 ecerejo ppp[208]: Chat: Expect(40): CONNECT
Oct 21 18:13:13 ecerejo ppp[208]: Chat: Received: ATDT9960976^M^M
Oct 21 18:13:13 ecerejo ppp[208]: Chat: Received: CONNECT 115200^M
Oct 21 18:13:13 ecerejo ppp[208]: Phase: deflink: dial -> carrier
Oct 21 18:13:14 ecerejo ppp[208]: Phase: deflink: /dev/cuaa1: CD detected
Oct 21 18:13:14 ecerejo ppp[208]: Phase: deflink: carrier -> login
Oct 21 18:13:14 ecerejo ppp[208]: Phase: deflink: login -> lcp
Oct 21 18:13:14 ecerejo ppp[208]: LCP: FSM: Using "deflink" as a transport
Oct 21 18:13:14 ecerejo ppp[208]: LCP: deflink: State change Initial -->
Closed
Oct 21 18:13:14 ecerejo ppp[208]: LCP: deflink: State change Closed -->
Stopped
Oct 21 18:13:15 ecerejo ppp[208]: LCP: deflink: LayerStart
Oct 21 18:13:15 ecerejo ppp[208]: LCP: deflink: SendConfigReq(1) state =
Stopped
Oct 21 18:13:15 ecerejo ppp[208]: LCP: ACFCOMP[2]
Oct 21 18:13:15 ecerejo ppp[208]: LCP: PROTOCOMP[2]
Oct 21 18:13:15 ecerejo ppp[208]: LCP: ACCMAP[6] 0x00000000
Oct 21 18:13:15 ecerejo ppp[208]: LCP: MRU[4] 1500
Oct 21 18:13:15 ecerejo ppp[208]: LCP: MAGICNUM[6] 0x71fe786c
Oct 21 18:13:15 ecerejo ppp[208]: LCP: deflink: State change Stopped -->
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: LCP: deflink: SendConfigReq(1) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: LCP: ACFCOMP[2]
Oct 21 18:13:18 ecerejo ppp[208]: LCP: PROTOCOMP[2]
Oct 21 18:13:18 ecerejo ppp[208]: LCP: ACCMAP[6] 0x00000000
Oct 21 18:13:18 ecerejo ppp[208]: LCP: MRU[4] 1500
Oct 21 18:13:18 ecerejo ppp[208]: LCP: MAGICNUM[6] 0x71fe786c
Oct 21 18:13:18 ecerejo ppp[208]: LCP: deflink: RecvConfigReq(0) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: LCP: ACCMAP[6] 0x00000000
Oct 21 18:13:18 ecerejo ppp[208]: LCP: AUTHPROTO[4] 0xc023 (PAP)
Oct 21 18:13:18 ecerejo ppp[208]: LCP: MAGICNUM[6] 0x0dc7f786
Oct 21 18:13:18 ecerejo ppp[208]: LCP: PROTOCOMP[2]
Oct 21 18:13:18 ecerejo ppp[208]: LCP: ACFCOMP[2]
Oct 21 18:13:18 ecerejo ppp[208]: LCP: deflink: SendConfigAck(0) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: LCP: ACCMAP[6] 0x00000000
Oct 21 18:13:18 ecerejo ppp[208]: LCP: AUTHPROTO[4] 0xc023 (PAP)
Oct 21 18:13:18 ecerejo ppp[208]: LCP: MAGICNUM[6] 0x0dc7f786
Oct 21 18:13:18 ecerejo ppp[208]: LCP: PROTOCOMP[2]
Oct 21 18:13:18 ecerejo ppp[208]: LCP: ACFCOMP[2]
Oct 21 18:13:18 ecerejo ppp[208]: LCP: deflink: State change Req-Sent -->
Ack-Sent
Oct 21 18:13:18 ecerejo ppp[208]: LCP: deflink: RecvConfigAck(1) state =
Ack-Sent
Oct 21 18:13:18 ecerejo ppp[208]: LCP: deflink: State change Ack-Sent -->
Opened
Oct 21 18:13:18 ecerejo ppp[208]: LCP: deflink: LayerUp
Oct 21 18:13:18 ecerejo ppp[208]: Phase: bundle: Authenticate
Oct 21 18:13:18 ecerejo ppp[208]: Phase: deflink: his = PAP, mine = none
Oct 21 18:13:18 ecerejo ppp[208]: Phase: Pap Output: ecerejo ********
Oct 21 18:13:18 ecerejo ppp[208]: Phase: Pap Input: SUCCESS ()
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: Using trigger address 0.0.0.0
Oct 21 18:13:18 ecerejo ppp[208]: CCP: FSM: Using "deflink" as a transport
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: State change Initial -->
Closed
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: LayerStart.
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: SendConfigReq(1) state =
Closed
Oct 21 18:13:18 ecerejo ppp[208]: CCP: DEFLATE[4] win 15
Oct 21 18:13:18 ecerejo ppp[208]: CCP: PRED1[2]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: State change Closed -->
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: Phase: deflink: lcp -> open
Oct 21 18:13:18 ecerejo ppp[208]: Phase: bundle: Network
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: FSM: Using "deflink" as a transport
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: State change Initial -->
Closed
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: LayerStart.
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: SendConfigReq(1) state =
Closed
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: IPADDR[6] 0.0.0.0
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: COMPPROTO[6] 16 VJ slots with
slot compression
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: PRIDNS[6] 198.4.75.100
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: SECDNS[6] 198.4.75.69
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: State change Closed -->
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: RecvConfigReq(1) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: COMPPROTO[6] 16 VJ slots with
slot compression
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: IPADDR[6] 169.132.63.253
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: SendConfigAck(1) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: COMPPROTO[6] 16 VJ slots with
slot compression
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: IPADDR[6] 169.132.63.253
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: State change Req-Sent -->
Ack-Sent
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: RecvConfigReq(2) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: CCP: MPPC[6]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: STAC[5]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: BSD[3]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: PRED1[2]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: SendConfigRej(2) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: CCP: MPPC[6]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: STAC[5]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: BSD[3]
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: RecvConfigRej(1) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: CCP: DEFLATE[4] win 15
Oct 21 18:13:18 ecerejo ppp[208]: CCP: deflink: SendConfigReq(2) state =
Req-Sent
Oct 21 18:13:18 ecerejo ppp[208]: CCP: PRED1[2]
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: RecvConfigNak(1) state =
Ack-Sent
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: IPADDR[6] 169.132.56.21
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: IPADDR[6] changing address:
0.0.0.0 --> 169.132.56.21
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: deflink: SendConfigReq(2) state =
Ack-Sent
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: IPADDR[6] 169.132.56.21
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: COMPPROTO[6] 16 VJ slots with
slot compression
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: PRIDNS[6] 198.4.75.100
Oct 21 18:13:18 ecerejo ppp[208]: IPCP: SECDNS[6] 198.4.75.69
Oct 21 18:13:19 ecerejo ppp[208]: CCP: deflink: RecvConfigReq(3) state =
Req-Sent
Oct 21 18:13:19 ecerejo ppp[208]: CCP: PRED1[2]
Oct 21 18:13:19 ecerejo ppp[208]: CCP: deflink: SendConfigAck(3) state =
Req-Sent
Oct 21 18:13:19 ecerejo ppp[208]: CCP: PRED1[2]
Oct 21 18:13:19 ecerejo ppp[208]: CCP: deflink: State change Req-Sent -->
Ack-Sent
Oct 21 18:13:19 ecerejo ppp[208]: CCP: deflink: RecvConfigAck(2) state =
Ack-Sent
Oct 21 18:13:19 ecerejo ppp[208]: CCP: deflink: State change Ack-Sent -->
Opened
Oct 21 18:13:19 ecerejo ppp[208]: CCP: deflink: LayerUp.
Oct 21 18:13:19 ecerejo ppp[208]: CCP: Predictor1: Input channel reset
Oct 21 18:13:19 ecerejo ppp[208]: CCP: Predictor1: Output channel reset
Oct 21 18:13:19 ecerejo ppp[208]: CCP: deflink: Out = PRED1[1], In = PRED1
[1]
Oct 21 18:13:19 ecerejo ppp[208]: IPCP: deflink: RecvConfigAck(2) state =
Ack-Sent
Oct 21 18:13:19 ecerejo ppp[208]: IPCP: deflink: State change Ack-Sent -->
Opened
Oct 21 18:13:19 ecerejo ppp[208]: IPCP: deflink: LayerUp.
Oct 21 18:13:19 ecerejo ppp[208]: IPCP: myaddr 169.132.56.21 hisaddr =
169.132.63.253
Oct 21 18:13:19 ecerejo ppp[208]: Command: idt: delete ALL
Oct 21 18:13:19 ecerejo ppp[208]: Command: idt: add 0 0 HISADDR
Oct 21 18:13:19 ecerejo ppp[208]: Warning: Add route failed: default
already exists
Oct 21 18:14:11 ecerejo ppp[208]: Command: /dev/tty: quit
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: deflink: LayerDown: 169.132.56.21
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: Using trigger address 0.0.0.0
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: deflink: SendTerminateReq(3) state
= Opened
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: deflink: State change Opened -->
Closing
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: deflink: RecvTerminateAck(3) state
= Closing
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: deflink: LayerFinish.
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: Connect time: 53 secs: 0 octets in,
0 octets out
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: : 0 packets in, 0 packets out
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: total 0 bytes/sec, peak 0
bytes/sec on Sat Oct 21 18:14:11 2000
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: deflink: State change Closing -->
Closed
Oct 21 18:14:11 ecerejo ppp[208]: Phase: bundle: Terminate
Oct 21 18:14:11 ecerejo ppp[208]: CCP: deflink: LayerDown.
Oct 21 18:14:11 ecerejo ppp[208]: CCP: deflink: State change Opened -->
Starting
Oct 21 18:14:11 ecerejo ppp[208]: CCP: deflink: LayerFinish.
Oct 21 18:14:11 ecerejo ppp[208]: CCP: deflink: State change Starting -->
Initial
Oct 21 18:14:11 ecerejo ppp[208]: LCP: deflink: LayerDown
Oct 21 18:14:11 ecerejo ppp[208]: LCP: deflink: SendTerminateReq(2) state =
Opened
Oct 21 18:14:11 ecerejo ppp[208]: LCP: deflink: State change Opened -->
Closing
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: open -> lcp
Oct 21 18:14:11 ecerejo ppp[208]: IPCP: deflink: State change Closed -->
Initial
Oct 21 18:14:11 ecerejo ppp[208]: LCP: deflink: RecvTerminateAck(2) state =
Closing
Oct 21 18:14:11 ecerejo ppp[208]: LCP: deflink: LayerFinish
Oct 21 18:14:11 ecerejo ppp[208]: LCP: deflink: State change Closing -->
Closed
Oct 21 18:14:11 ecerejo ppp[208]: LCP: deflink: State change Closed -->
Initial
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: Disconnected!
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: lcp -> logout
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: logout -> hangup
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: Disconnected!
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: Connect time: 84 secs:
273 octets in, 365 octets out
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: : 10 packets in, 13
packets out
Oct 21 18:14:11 ecerejo ppp[208]: Phase: total 7 bytes/sec, peak 117
bytes/sec on Sat Oct 21 18:14:11 2000
Oct 21 18:14:11 ecerejo ppp[208]: Phase: deflink: hangup -> closed
Oct 21 18:14:11 ecerejo ppp[208]: Phase: bundle: Dead
Oct 21 18:14:11 ecerejo ppp[208]: Phase: PPP Terminated (normal).
-------------------------------x-------------------------------------------
MY ppp.conf:
#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.1 2000/08/18 08:33:02 jhb Exp $
#################################################################
default:
set device /dev/cuaa1
# set log Phase Chat LCP IPCP CCP tun command
set log Phase Chat Connect Carrier lcp ipcp ccp command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
set timeout 120 # 3 mintue idle timer (the default)
add default HISADDR # Add a (sticky) default route
enable dns # request DNS info (for resolv.conf)
alias enable yes
#papchap:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#
idt:
set phone 9960976
set authname ecerejo
set authkey xxxxxxxx
set openmode active
-----------------------------------------x---------------------------------
MY ppp.linkup:
idt:
delete ALL
add 0 0 HISADDR
----------------------------------------x----------------------------------
MY host.conf:
# $FreeBSD: src/etc/host.conf,v 1.6 1999/08/27 23:23:41 peter Exp $
# First try the /etc/hosts file
hosts
# Now try the nameserver next.
bind
# If you have YP/NIS configured, uncomment the next line
# nis
---------------------------------------x-----------------------------------
MY hosts:
127.0.0.1 localhost.idt.net localhost
127.0.0.1 localhost.idt.net
10.0.0.1 ecerejo.idt.net ecerejo
10.0.0.1 ecerejo.idt.net
----------------------------------------x----------------------------------
MY resolv.conf:
domain idt.net
nameserver 198.4.75.100
nameserver 198.4.75.69
----------------------------------------x----------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39F27C45.9080907>