Date: Wed, 22 Nov 2000 22:05:14 -0800 From: Bill Schoolcraft <bill@wiliweld.com> To: FreeBSD <freebsd-questions@FreeBSD.org> Cc: Gerd Knops <gerti-freebsdq@bitart.com> Subject: USB and "camcontrol" update Message-ID: <3A1CB39A.15E399C@wiliweld.com>
next in thread | raw e-mail | index | archive | help
Hello Gerd and Family, I have followed the instructions for having my USB HP Digital camera recognized by FreeBSD 4.1 and the commands I used were: (A) mkdir /camera (B) camcontrol rescan 0 /*which reported success */ (C) mount_msdos /dev/da0s1 /camera And the error that I received from the last command is: mount_msdos: /dev/da0s1: Device not configured. The FreeBSD-4.1 detects and identifies the camera each and every time I turn it on. It detected and identified it 4 seperate times trying each port on the hub. Again 4 seperate times with the hub plugged into the second USB port on the back of the machine. And it was identified plugging the camera directly into the USB port(s) on the back of the machine. I did that thinking that maybe the 4 port USB hub might be causing some issues. I'd like to thank anyone in advance for any tips here. -- Bill Schoolcraft PO Box 210076 San Francisco, CA 94121 "UNIX, A Way of Life !!!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A1CB39A.15E399C>