Date: Sun, 26 Nov 2000 17:10:18 -0700 From: Janet Sullivan <eliyanah@techie.com> To: Otter <otterr@telocity.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3c574-TX PCMCIA NIC Message-ID: <3A21A66A.F1ECC526@techie.com> References: <HLEDJBJKDDPDJBMGCLPPMEIICKAA.otterr@telocity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The mediaopt half-duplex flag doesn't work with ep, at least on 4.2-STABLE from a couple of days ago. The ep man page also does not state it supports the full and half duplex mediaopt flags. I tried that before posting. ;-) I had some time to do some further investigations with a cross over cable and another FreeBSD box. The ep0 in my laptop correctly auto sensed both full and half-duplex at both 10baseT and 100baseTX speeds when plugged into the other NIC (rl). I'm now suspecting that there is some kind of compatability problem between the 3c574-TX and my little Linksys switch. Unfortunately, its an unmanaged (dumb) switch that only auto senses things, so I can't set anything on the switch side. It also looks like the 3c574-TX wants to be "auto only". :-( I decided to try another OS on the laptop to see if the problem was the same, and it also exists with SuSE 7.0 and Win98, neither of which lets you set the card to anything but "auto" when it comes to speed and duplex. So, at this point it looks like the two "auto sensing only" pieces of hardware just don't like each other. My solution for now has been to go back to SuSE which supports my Sohoware CardBus card. I'd really rather run FreeBSD though. Is anyone out there using a 3c574-TX with a LinkSys 10/100 switch? Otter wrote: > > Janet, > I have the same card, but can't test it because it's linked to a > switch. I need full-duplex. Try using the mediaopt flag. ifconfig ep0 > a.b.c.d mediaopt half-duplex netmask 255.x.y.z should do it. The > mediaopt flag is mentioned in the ifconfig man page. > -Otter > > }-----Original Message----- > }From: owner-freebsd-questions@FreeBSD.ORG > }[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of > }Janet Sullivan > }Sent: Sunday, November 26, 2000 6:14 AM > }To: freebsd-questions@FreeBSD.ORG > }Subject: 3c574-TX PCMCIA NIC > } > } > }Is there a way to force a 3c574-TX PCMCIA NIC into half-duplex mode? > }The ep driver doesn't seem to allow this. My problem is that my > }3c574-TX in my laptop will not work when plugged in to my > }10/100 switch > }- all the lights are on, but no traffic is ever sent or > }received. When > }I plug the same NIC directly into another system with a cross over > }cable, and its a half-duplex connection, things work just fine. Any > }suggestions? > } > } > }To Unsubscribe: send mail to majordomo@FreeBSD.org > }with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A21A66A.F1ECC526>