Date: Sat, 22 Feb 2003 12:50:40 +0100 From: Michael Class <michael_class@gmx.net> To: phk@phk.freebsd.dk Cc: Christian Gusenbauer <c47g@gmx.at>, freebsd-current@FreeBSD.ORG Subject: Re: Mounting Root fails with error 22 (EINVAL) Message-ID: <3E576410.3050201@gmx.net> In-Reply-To: <18518.1045913517@critter.freebsd.dk> References: <18518.1045913517@critter.freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------020502060107090101030102
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
> Please try "boot -v" and send dmesg.
>
> Also, please try entering "?" to root device prompt to see what devices
> are available.
Hello, enclosed is the boot -v output that you were asking for.
Michael
--
-------------------------------------------------------------------------
michael class, viktor-renner str. 39, 72074 tuebingen, frg
E-Mail: michael_class@gmx.net
Phone: +49 7031 14-3707 (work) +49 7071 81950 (private)
-------------------------------------------------------------------------
--------------020502060107090101030102
Content-Type: text/plain;
name="dmesg-v.out"
Content-Transfer-Encoding: 8bit
Content-Disposition: inline;
filename="dmesg-v.out"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Feb 22 08:29:29 MET 2003
michaelc@pc-micha.mc.hp.com:/usr/src/sys/i386/compile/MCSMP2
Preloaded elf kernel "/boot/kernel.test/kernel" at 0xc0565000.
Preloaded elf module "/boot/kernel.test/acpi.ko" at 0xc05650bc.
Calibrating clock(s) ... i8254 clock: 1193225 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 996553246 Hz
CPU: Intel Pentium III (996.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073676288 (1023 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0058f000 - 0x3ffdffff, 1067782144 bytes (260689 pages)
avail memory = 1037225984 (989 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fdad0
bios32: Entry = 0xfdae0 (c00fdae0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb01
pnpbios: Found PnP BIOS data at 0xc00f6e40
pnpbios: Entry = f0000:5c04 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_694X> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010048
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7530
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0xfe 14
embedded 0 7 B 0xff 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 14 A 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 14 B 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 14 C 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 14 D 0x02 3 4 5 7 9 10 11 12 14 15
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.7.2
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.7.3
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.9.0
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.9.1
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.9.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.9.3
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.10.0
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.10.2
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.10.3
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.11.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.11.1
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.11.2
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.11.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.12.0
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.12.1
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.12.2
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.12.3
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.13.0
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.13.1
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.13.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.13.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.1.0
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.1.1
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.14.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.7.2
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.7.3
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.9.0
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.9.1
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.9.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.9.3
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.10.0
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.10.2
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.10.3
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.11.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.11.1
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.11.2
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.11.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11 12 14 15] 0.12.0
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.12.1
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.12.2
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.12.3
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 11 12 14 15] 0.13.0
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.13.1
\\_SB_.LNKD irq 9: [ 3 4 5 6 7 10 11 12 14 15] 0.13.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 ª 1112 14 1] 0.13.3
\\_SB_LNKA irq 11: [ 3 4 5 6 7 0 11 12 14 15] 0.1.0
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 10 1 12 14 15] 0.1.1
\\_SB_.LNKC irq 10: [ 3 4 5 6 7 10 11 12 14 15] 0.14.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0xc4
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x0 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x1a
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000d000, size 2, enabled
map[18]: type 4, range 32, base 0000cc00, size 2, enabled
found-> vendor=0x1106, dev=0x3058, revid=0x50
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000c000, size 7, enabled
map[14]: type 1, range 32, base dffffe80, size 7, enabled
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d800, size 8, enabled
map[14]: type 1, range 32, base dfffff00, size 8, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x01
bus=0, slot=10, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 3, range 32, base dedfe000, size 12, enabled
found-> vendor=0x109e, dev=0x036e, revid=0x02
bus=0, slot=11, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=9
map[10]: type 3, range 32, base dedff000, size 12, enabled
found-> vendor=0x109e, dev=0x0878, revid=0x02
bus=0, slot=11, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, stateg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
map[10]: type 4, range 32, base 0000bc00, size 3, enabled
map[14]: type 4, range 32, base 0000b800, size 2, enabled
map[18]: type 4, range 32, base 0000b400, size 3, enabled
map[1c]: type 4, range 32, base 0000b000, size 2, enabled
map[20]: type 4, range 32, base 0000ac00, size 8, enabled
found-> vendor=0x1103, dev=0x0004, revid=0x03
bus=0, slot=13, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=5
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x6000-0x6fff
pcib1: memory decode 0xdee00000-0xdfefffff
pcib1: prefetched decode 0xdac00000-0xdecfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base dc000000, size 25, enabled
map[14]: type 1, range 32, base dfefc000, size 14, enabled
map[18]: type 1, range 32, base df000000, size 23, enabled
found-> vendor=0x102b, dev=0x0525, revid=0x03
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686b UDMA100 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: pre reset mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=52
ata0-master: ATA 01 a5
ata0-slave: ATA 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: pre reset mask=01 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1: after reset mask=01 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 9 at device 7.2 on pci0
uhci0: LegSup = 0x0000a000
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Hewlett-Packard DeskJet 990C, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapropm0: SMBus I/O base at 0x400
viapropm0: <VIA VT82C686A Power Management Unit> port 0x400-0x40f at device 7.4 on pci0
viapropm0: SMBus revision code 0x40
smb0: <SMBus generic I/O> on smbus0
pcm0: <VIA VT82C686A> port 0xcc00-0xcc03,0xd000-0xd003,0xd400-0xd4ff irq 10 at device 7.5 on pci0
pcm0: <ICEnsemble ICE1232 ac97 codec>
pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27
pcm0: ac97 primary codec extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap 71c000, 1000; 0xc6168000 -> 71c000
pcm0: sndbuf_setmap 723000, 1000; 0xc616f000 -> 723000
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xc000-0xc07f mem 0xdffffe80-0xdffffeff irq 5 at device 9.0 on pci0
xl0: Ethernet address: 00:10:5a:d7:dd:9c
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
sym0: <810> port 0xd800-0xd8ff mem 0xdfffff00-0xdfffffff irq 10 at device 10.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
bktr0: <rookTree 878> mem 0xdedfe000-0xdedfefff irq 9 at device 11.0 on pci0
brooktree0: PCI bus latency is 64.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00ffffdb
bktr0: subsystem 0x0070 0x13eb
bktr0: Hauppauge Model 61344 D121
bktr0: Detected a MSP3410D-B4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, remote control.
pci0: <multimedia> at device 11.1 (no driver attached)
atapci1: <HighPoint HPT370 UDMA100 controller> port 0xac00-0xacff,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07 irq 5 at device 13.0 on pci0
ata2: iobase=0xbc00 altiobase=0xb802 bmaddr=0xac00
ata2: at 0xbc00 on atapci1
ata3: iobase=0xb400 altiobase=0xb002 bmaddr=0xac08
ata3: pre reset mask=01 ostat0=50 ostat2=00
ata3-master: ATAPI 00 00
ata3: after reset mask=01 stat0=50 stat1=00
ata3-master: ATA 01 a5
ata3: devices=01
ata3: at 0xb400 on atapci1
acpi_button1: <Sleep Button> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-38, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 failed to probe on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 3, 4, 5, 6, 7, 9, 10, 12, 14, 15, apic_imen: 0xffff2905
Device configuration finished.
procfs registered
linprocfs registered
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
lo0: bpf attached
IPv6 packet filtering initialized, default to accept, unlimited logging
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited
Linux ELF exec handler installed
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
ad0: success setting UDMA66 on VIA 82C686b chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IBM-DPTA-373420/P71OA30A> ATA-4 disk at ata0-master
ad0: 32634MB (66835440 sectors), 66305 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 32 depth queue, tagged UDMA66
ad0: piomode=12 dmamode=34 udmamode=68 cblid=1
ad1: success setting UDMA100 on VIA 82C686b chip
ar: FreeBSD check1 failed
ad1: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata0-slave
ad1: 43979MB (90069840 sectors), 89355 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 32 depth queue, tagged UDMA100
ad1: piomode=12 dmamode=34 udmamode=69 cblid=1
ad6: success setting UDMA100 on HighPoint chip
ar: HighPoint check1 failed
ad6: <IC35L180AVV207-1/V26OA60F> ATA-6 disk at ata3-master
ad6: 176700MB (361882080 sectors), 359010 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 32 depth queue, tagged UDMA100
ad6: piomode=12 dmamode=34 udmamode=69 cblid=1
ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-master: success setting PIO4 on VIA 82C686b chip
acd0: <SONY DVD RW DRU-500A/1.0g> DVD-R drive at ata1 as master
acd0: read 3246KB/s (63011KB/s) write 3246KB/s (3246KB/s), 8192KB buffer, PIO4
acd0: Reads: CD-R, CD-RW CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, DVD-R, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
Waiting 2 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):255/254/255 s:63 l:33554241
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:33554304 l:32874471
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):255/254/255 e(CHS):255/254/255 s:66442257 l:393183
GEOM: Configure ad0s1, start 32256 length 17179771392 end 17179803647
GEOM: Configure ad0s2, start 17179803648 length 16831729152 end 34011532799
GEOM: Configure ad0s4, start 34018435584 length 201309696 end 34219745279
GEOM: new disk ad1
GEOM: new disk ad6
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:390978
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:391103 l:1060228
GEOM: Configure ad0s5, start 32256 length 200180736 end 200212991
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:1 l:1060227
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:1451393 l:31423078
GEOM: Configure ad0s6, start 200245248 length 542836224 end 743081471
MBREXT Slice 7 on ad0s2:
[0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:1 l:31423077
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s7, start 743113728 length 16088615424 end 16831729151
GEOM: Add ad0s4 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s4a, start 32256 length 201277440 end 201309695
GEOM: Configure ad0s4c, start 0 length 201309696 end 201309695
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):255/15/255 s:63 l:90069777
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 46115725824 end 46115758079
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):24/7/134 s:63 l:100663296
[1] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:100679355 l:134223075
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad6s1, start 32256 length 51539607552 end 51539639807
GEOM: Configure ad6s2, start 51547829760 length 68722214400 end 120270044159
GEOM: Add ad0s4c hot[0] start 512 length 276 end 787
GEOM: Add ad1s1 hot[0] start 512 length 276 end 787
GEOM: Configure ad1s1a, start 135168 length 268435456 end 268570623
GEOM: Configure ad1s1b, start 268570624 length 1178599424 end 1447170047
GEOM: Configure ad1s1c, start 0 length 46115725824 end 46115725823
GEOM: Configure ad1s1d, start 1447170048 length 536870912 end 1984040959
GEOM: Configure ad1s1e, start 1984040960 length 671088640 end 2655129599
GEOM: Configure ad1s1f, start 2655129600 length 4294967296 end 6950096895
GEOM: Configure ad1s1g, start 6950096896 length 3221225472 end 10171322367
GEOM: Configure ad1s1h, start 10171322368 length 35944402944 end 46115725311
GEOM: Add ad6s1 hot[0] start 512 length 276 end 787
GEOM: Configure ad6s1a, start 32768 length 49392076800 end 49392109567
GEOM: Configure ad6s1b, start 49392110592 length 2147483648 end 51539594239
GEOM: Configure ad6s1c, start 0 length 51539607552 end 51539607551
GEOM: Add ad1s1c hot[0] start 512 length 276 end 787
GEOM: Add ad6s1c hot[0] start 512 length 276 end 787
(probe3:sym0:0:3:0): error 22
(probe3:sym0:0:3:0): Unretryable Error
(probe4:sym0:0:4:0): error 22
(probe4:sym0:0:4:0): Unretryable Error
(probe0:sym0:0:2:1): error 6
(probe0:sym0:0:2:1): Unretryable Error
(probe0:sym0:0:2:2): error 6
(probe0:sym0:0:2:2): Unretryable Error
(probe0:sym0:0:2:3): error 6
(probe0:sym0:0:2:3): Unretryable Error
(probe0:sym0:0:2:4): error 6
(probe0:sym0:0:2:4): Unretryable Error
(probe0:sym0:0:2:5): error 6
(probe0:sym0:0:2:5): Unretryable Error
(probe0:sym0:0:2:6): error 6
(probe0:sym0:0:2:6): Unretryable Error
(probe0:sym0:0:2:7): error 6
(probe0:sym0:0:2:7): Unretryable Error
pass0 at sym0 bus 0 target 2 lun 0
pass0: <UMAX Astra 1200S V2.9> Fixed Scanner SCSI-2 device
pass0: Serial Number \M^[
pass0: 3.300MB/s transfers
pass1 at sym0 bus 0 target 3 lun 0
pass1: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device
pass1: 10.000MB/s transfers (10.000MHz, offset 8)
pass2 at sym0 bus 0 target 4 lun 0
pass2: <HP C1533A A708> Removable Sequential Access SCSI-2 device
pass2: 10.000MB/s transfers (10.000MHz, offset 8)
sa0 at sym0 bus 0 target 4 lun 0
sa0: <HP C1533A A708> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
pass0 at sym0 bus 0 target 2 lun 0
pass0: <UMAX Astra 1200S V2.9> Fixed Scanner SCSI-2 device
pass0: Serial Number \M^[
pass0: 3.300MB/s transfers
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
Mounting root from ufs:/dev/ad0s4a
(cd0:sym0:0:3:0): error 6
(cd0:sym0:0:3:0): Unretryable Error
cd0 at sym0 bus 0 target 3 lun 0
cd0: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Root mount failed: 22
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM disk devices:
ad6s1c ad6s1b ad6s1a ad1s1h ad1s1g ad1s1f ad1s1e ad1s1d ad1s1c ad1s1b ad1s1a ad6s2 ad6s1 ad1s1 ad0s4c ad0s4a ad0s7 ad0s6 ad0s5 ad6 ad1 ad0s4 ad0s2 ad0s1 ad0 geom.ctl
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
panic: Root mount failed, startup aborted.
cpuid = 0; lapic.id = 00000000
--------------020502060107090101030102--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E576410.3050201>