Date: Sat, 16 Aug 2014 10:02:57 +0300 From: Daniel Braniss <danny@cs.huji.ac.il> To: Hans Petter Selasky <hps@selasky.org> Cc: hackers@freebsd.org Subject: Re: Mellanox 10gb driver? Message-ID: <3E7F3970-0541-402F-B855-EDA299B5BBC1@cs.huji.ac.il> In-Reply-To: <0E7861FF-AB45-421F-8BA0-0EAD02B85AF0@cs.huji.ac.il> References: <5FA0CF8C-2C93-4639-AA6C-40D3C278FE0F@cs.huji.ac.il> <53EDF13D.5050206@selasky.org> <0E7861FF-AB45-421F-8BA0-0EAD02B85AF0@cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On Aug 16, 2014, at 9:53 AM, Daniel Braniss <danny@cs.huji.ac.il> wrote:
>
> On Aug 15, 2014, at 2:38 PM, Hans Petter Selasky <hps@selasky.org> wrote:
>
>> On 08/15/14 12:55, Daniel Braniss wrote:
>>> hi all,
>>> any idea if there is/will be a driver for:
>>>
>>> none3@pci0:5:0:0: class=0x020000 card=0x005515b3 chip=0x100315b3 rev=0x00 hdr=0x00
>>> vendor = 'Mellanox Technologies'
>>> device = 'MT27500 Family [ConnectX-3]'
>>> class = network
>>> subclass = ethernet
>>>
>>
>> Hi,
>>
>> If you build the kernel using MK_OFED=yes, your hardware is supported by the following modules:
>>
>> .if ${MK_OFED} != "no" || defined(ALL_MODULES)
>> _mlx4= mlx4
>> _mlx4ib= mlx4ib
>> _mlxen= mlxen
>> _mthca= mthca
>> .endif
>>
>> You need to run latest -stable due to some compile issues which have been fixed.
>>
>> —HPS
>
> hi,
>
> I added WITH_MK_OFED=yes to the latest stable but no joy, it’s sill reported as none.
> is there some magic that i’m missing?
> thanks,
> danny
some more info, if it helps:
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib0: allocated type 3 (0xdf200000-0xdf3fffff) for rid 20 of pcib5
pcib0: allocated type 3 (0xd5000000-0xd57fffff) for rid 24 of pcib5
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: memory decode 0xdf200000-0xdf3fffff
pcib5: prefetched decode 0xd5000000-0xd57fffff
pcib5: special decode ISA
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
found-> vendor=0x15b3, dev=0x1003, revid=0x00
domain=0, bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 3 supports D0 D3 current D0
MSI-X supports 128 messages in map 0x10
map[10]: type Memory, range 64, base 0xdf300000, size 20, enabled
pcib5: allocated memory range (0xdf300000-0xdf3fffff) for rid 10 of pci0:5:0:0
map[18]: type Prefetchable Memory, range 64, base 0xd5000000, size 23, enabled
pcib5: allocated prefetch range (0xd5000000-0xd57fffff) for rid 18 of pci0:5:0:0
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 35
pci5: <network, ethernet> at device 0.0 (no driver attached)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E7F3970-0541-402F-B855-EDA299B5BBC1>