Date: Wed, 05 Nov 2003 08:44:10 -0500 From: "Steven R. Gerber" <StevenRGerber@Technologist.com> To: freebsd-ports@freebsd.org Subject: apache+mod_ssl-1.3.28+2.8.15_2 on 4.8-STABLE Message-ID: <3FA8FEAA.1040303@Technologist.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------070408010804040205090800 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Already posted to comp.unix.bsd.freebsd & comp.unix.bsd.freebsd.misc I can't pkg_add ... I downloaded apache+mod_ssl-1.3.28+2.8.15_2.tgz from ftp://ftp3.us.FreeBSD.org, etc.. bash-2.05a# uname -a FreeBSD gsd2 4.8-STABLE FreeBSD 4.8-STABLE #0: Thu Aug 7 16:39:34 EDT 2003 root@gsd2:/usr/src/sys/compile/CUSTOM2 i386 bash-2.05a# pkg_add -v apache+mod_ssl-1.3.28+2.8.15_2.tgz Requested space: 7697344 bytes, free space: 1937741824 bytes in /var/tmp/instmp.G5k2NR pkg_add: read_plist: bad command '@conflicts apache+ipv6-1.*' What am I missing? Thanks, Steven -- Steven R. Gerber Gerber Systems Design 234 Fifth Avenue, Suite 409 New York, NY 10001 212-252-1143 http://www.Gerber-Systems.com --------------070408010804040205090800 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" bash-2.05a# dmesg Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-STABLE #0: Thu Aug 7 16:39:34 EDT 2003 root@gsd2:/usr/src/sys/compile/CUSTOM2 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (199.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping = 9 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> real memory = 268435456 (262144K bytes) config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> en pcic1 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> po pcic1 0x3e2 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> ir pcic1 0 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> iom pcic1 0xd4000 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> f pcic1 0 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> en sio3 config> po sio3 0x2e8 config> ir sio3 9 config> f sio3 0 config> en sio2 config> po sio2 0x3e8 config> ir sio2 5 config> f sio2 0 config> q avail memory = 257036288 (251012K bytes) Programming 16 pins in IOAPIC #0 EISA INTCONTROL = 0000c200 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0413000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc041309c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 amr0: <LSILogic MegaRAID> port 0xfc00-0xfc7f irq 14 at device 7.0 on pci0 amr0: <Series 428> Firmware A.04.03, BIOS A.04.03, 4MB RAM pcib1: <DEC 21052 PCI-PCI bridge> at device 8.0 on pci0 pci1: <PCI bus> on pcib1 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xece0-0xecff mem 0xfea00000-0xfeafffff,0xfe8fe000-0xfe8fefff irq 9 at device 2.0 on pci1 fxp0: Ethernet address 00:a0:c9:77:d4:92 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82375EB PCI-EISA bridge> at device 9.0 on pci0 eisa0: <EISA bus> on isab0 mainboard0: <HWPc141 (System Board)> on eisa0 slot 0 isa0: <ISA bus> on isab0 ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfedff000-0xfedfffff irq 15 at device 10.0 on pci0 ahc0: Using left over BIOS settings aic7880: Wide Channel A, SCSI Id=7, 16/253 SCBs ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xf400-0xf4ff mem 0xfedfe000-0xfedfefff irq 15 at device 11.0 on pci0 ahc1: Using left over BIOS settings aic7880: Wide Channel A, SCSI Id=7, 16/253 SCBs orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio3: configured irq 9 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Waiting 15 seconds for SCSI devices to settle amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 4066MB (8327168 sectors) RAID 1 (optimal) amrd1: <LSILogic MegaRAID logical drive> on amr0 amrd1: 17354MB (35540992 sectors) RAID 1 (optimal) SMP: AP CPU #1 Launched! sa0 at ahc0 bus 0 target 3 lun 0 sa0: <HP C1533A A612> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) Mounting root from ufs:/dev/amrd0s1a cd0 at ahc0 bus 0 target 5 lun 0 cd0: <TOSHIBA CD-ROM XM-5701TA 0317> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present --------------070408010804040205090800--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FA8FEAA.1040303>