Date: Thu, 15 Jan 2009 10:52:35 +0000 From: "Paul B. Mahol" <onemda@gmail.com> To: "Marc Peters" <marc@sanity.de> Cc: freebsd-stable@freebsd.org Subject: Re: kernel panics when connected through wpi to apple extreme ap Message-ID: <3a142e750901150252v5633f808q71d3fa3ab5050b20@mail.gmail.com> In-Reply-To: <496F0E85.5090904@sanity.de> References: <496F0E85.5090904@sanity.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On 1/15/09, Marc Peters <marc@sanity.de> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > hello list, > > i have a lenovo t60 with an integrated intel 3945ABG wireless chipset. > when i was running 7.1-PRERELEASE i realised that the network connection > of my wpi died after some time when connected to the mention apple > access point. i had to restart the card and everything went fine, for > some time (about half an hour). since 7.1-RELEASE and now with > 7.1-STABLE the kernel panics with a fatal trap and dumps it's core after > some minutes (this output ist from -RELEASE-p1, but it's identical to > the one i got from -STABLE): > > Fatal trap 12: page fault while in kernel mode > cpuid = 0; apic id = 00 > fault virtual address = 0xffff > fault code = supervisor read, page not present > instruction pointer = 0x20:0xc0deadfc > stack pointer = 0x28:0xe58bbbe0 > frame pointer = 0x28:0xe58bbc9c > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def32 1, gran 1 > processor eflags = interrupt enabled, resume, IOPL = 0 > current process = 25 (wpi0 taskq) > trap number = 12 > panic: page fault > cpuid = 0 > Uptime: 6m 14s > Physical memory: 2034 MB > Dumping 149 MB: 134 118 192 86 70 65 38 22 6 > Dump complete > Automatic reboot in 15 seconds - press a key on the console to abort > > when i run this box connected to a netgear-ap i have at home, everything > is fine (and was before, no panics, no connection dropping). i have the > dump at hand, but since it's 150 MB i won't send it around via mail. if > anyone is interested, i can upload it somewhere and send the link. > > anyone any ideas? Enable textdump(8) and post bt output from debuger once panic happen. (I'm not going to download 150MB) > marc > > dmesg: > > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-STABLE #0: Wed Jan 14 13:23:00 CET 2009 > root@lappi.agentur.local:/usr/obj/usr/src/sys/GENERIC_DRM > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1995.02-MHz > 686-class CPU) > Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 2146238464 (2046 MB) > avail memory = 2090221568 (1993 MB) > ACPI APIC Table: <LENOVO TP-79 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address > or length: 0 102C/0 [20070320] > ioapic0: Changing APIC ID to 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <LENOVO TP-79> on motherboard > acpi0: [ITHREAD] > acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 7ff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem > 0xd8000000-0xdfffffff,0xee100000-0xee10ffff irq 16 at device 0.0 on pci1 > drm0: <ATI Mobility Radeon X1400> on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] Initialized radeon 1.29.0 20080613 > hdac0: <Intel 82801G High Definition Audio Controller> mem > 0xee400000-0xee403fff irq 17 at device 27.0 on pci0 > hdac0: HDA Driver Revision: 20090110_0123 > hdac0: [ITHREAD] > pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x3000-0x301f mem > 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2 > em0: Using MSI interrupt > em0: [FILTER] > em0: Ethernet address: 00:16:41:e3:4a:ff > pcib3: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib3 > wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xedf00000-0xedf00fff irq 17 > at device 0.0 on pci3 > wpi0: Ethernet address: 00:19:d2:07:cf:36 > wpi0: [ITHREAD] > pcib4: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 > pci12: <ACPI PCI bus> on pcib5 > uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at > device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 17 at > device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at > device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at > device 29.3 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem > 0xee404000-0xee4043ff irq 19 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 > uhub4: 8 ports with 8 removable, self powered > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci21: <ACPI PCI bus> on pcib6 > cbb0: <TI1510 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at > device 0.0 on pci21 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb0: [ITHREAD] > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > atapci1: <Intel AHCI controller> port > 0x18c8-0x18cf,0x18ac-0x18af,0x18c0-0x18c7,0x18a8-0x18ab,0x18b0-0x18bf > mem 0xee404400-0xee4047ff irq 16 at device 31.2 on pci0 > atapci1: [ITHREAD] > atapci1: AHCI Version 01.10 controller with 4 ports detected > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: port not implemented > ata3: [ITHREAD] > ata4: <ATA channel 2> on atapci1 > ata4: port not implemented > ata4: [ITHREAD] > ata5: <ATA channel 3> on atapci1 > ata5: port not implemented > ata5: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model Generic PS/2 mouse, device ID 0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 > cpu0: <ACPI CPU> on acpi0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem > 0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid > ORM0000 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.20, addr > 2> on uhub0 > ums0: 8 buttons and Z dir. > ugen0: <STMicroelectronics Biometric Coprocessor, class 0/0, rev > 1.00/0.01, addr 2> on uhub3 > Timecounters tick every 1.000 msec > acd0: DVDR <HL-DT-ST DVDRAM GSA-4083N/1.08> at ata0-master UDMA33 > ad4: 152627MB <SAMSUNG HM160HI HR100-08> at ata2-master SATA150 > hdac0: HDA Codec #0: Analog Devices AD1981HD > hdac0: HDA Codec #1: Conexant (Unknown) > pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0 > pcm1: <HDA Analog Devices AD1981HD PCM #1 Digital> at cad 0 nid 1 on hdac0 > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad4s1a > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v2.0.9 (FreeBSD) > > iEYEARECAAYFAklvDoUACgkQCnBgS+kUGEvHIACgljhgGyTqyxuJI+o5v7CnvQ7x > 4EAAmwfPW1W329FkWPqTcxkWSdTr4DFs > =WDri > -----END PGP SIGNATURE----- > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" > -- Paul
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3a142e750901150252v5633f808q71d3fa3ab5050b20>