Date: Sun, 21 Jan 2001 19:20:28 -0600 From: David Syphers <dbsypher@uchicago.edu> To: mobile@freebsd.org Subject: configuring AmbiCom cardbus Message-ID: <4.3.2.7.2.20010121190509.00c05f00@nsit-popmail.uchicago.edu>
next in thread | raw e-mail | index | archive | help
--=====================_10962493==_ Content-Type: text/plain; charset="us-ascii"; format=flowed I'm running a 5-CURRENT snapshot from January 20. I've built a kernel that includes cardbus, pccbb, miibus, and dc (for my AmbiCom 8100 DEC Tulip-based card), and enabled DHCP. Right now I'm getting "watchdog timeout" errors on boot. Last time I tried this (Dec. 5) the errors were due to the fact that the graphics controller and the ethernet card were both being assigned IRQ 11. I've tried editing /etc/pccard.conf so that it doesn't consider IRQ 11 free, but this doesn't affect anything. This time (Jan. 20), though, there seems to be no mention of my graphics controller in the dmesg (another thing to worry about?) - the line below is from a boot on a December 5 -CURRENT system. pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 2.0 irq 11 I've looked at /boot/device.hints, but it doesn't seem I should put anything in there - everything in there is ISA. Anyway, I tried that on the December 5 system and although it got rid of the watchdog timeout errors, the card seemed no closer to working. The output of a boot -v is attached. Any ideas would be appreciated. Thanks, -David --=====================_10962493==_ Content-Type: text/plain; charset="us-ascii" Content-Disposition: attachment; filename="dmesg_v" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20010120-CURRENT #0: Sat Jan 20 20:34:57 CST 2001 root@:/usr/src/sys/compile/CERBERUS Calibrating clock(s) ... TSC clock: 267278109 Hz, i8254 clock: 1193206 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping = 0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 83886080 (81920K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0032d000 - 0x04ff7fff, 80523264 bytes (19659 pages) avail memory = 78450688 (76612K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6eb0 bios32: Entry = 0xfd7f2 (c00fd7f2) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd7f0+0x205 pnpbios: Found PnP BIOS data at 0xc00f6ee0 pnpbios: Entry = f0000:a84f Rev = 1.0 pnpbios: Event flag at 400 Other BIOS signatures found: Preloaded elf kernel "kernel" at 0xc0307000. null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled Math emulator present Using $PIR table, 5 entries at 0xc00fdf70 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard pci0: physical bus=0 map[10]: type 3, range 32, base 00000000, size 26, enabled found-> vendor=0x8086, dev=0x7192, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 map[10]: type 3, range 32, base fd000000, size 24, enabled map[14]: type 1, range 32, base fea00000, size 21, enabled map[18]: type 1, range 32, base fed00000, size 20, enabled found-> vendor=0x10c8, dev=0x0004, revid=0x00 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 found-> vendor=0x8086, dev=0x7110, revid=0x01 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 map[20]: type 4, range 32, base 0000fcd0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 map[20]: type 4, range 32, base 0000fce0, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=255 map[90]: type 4, range 32, base 00002180, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x01 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 found-> vendor=0x104c, dev=0xac15, revid=0x01 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=a, irq=255 found-> vendor=0x104c, dev=0xac15, revid=0x01 bus=0, slot=10, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=b, irq=255 pci0: <PCI bus> on pcib0 pci0: <display, VGA> at 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed pci0: <serial bus, USB> at 7.2 (no driver attached) pci0: <bridge, PCI-unknown> at 7.3 (no driver attached) pccbb0: <TI1131 PCI-CardBus Bridge> at device 10.0 on pci0 pccbb0: PCI Memory allocated: 44000000 pci_cfgintr_unique: hard-routed to irq 11 pci_cfgintr: 0:10 INTA routed to irq 11 cardbus0: <Cardbus bus (newcard)> on pccbb0 pccbb0: WARNING: cannot attach pccard bus. pccbb1: <TI1131 PCI-CardBus Bridge> at device 10.1 on pci0 pccbb1: PCI Memory allocated: 44001000 pci_cfgintr_unique: hard-routed to irq 11 pci_cfgintr: 0:10 INTB routed to irq 11 cardbus1: <Cardbus bus (newcard)> on pccbb1 pccbb1: WARNING: cannot attach pccard bus. ata-: ata0 already exists, using ata2 instead Trying Read_Port at 203 YMH0021: start dependant YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x10 YMH0021: adding io range 0x530-0x537, size=0x8, align=0x8 YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8 YMH0021: adding io range 0x330-0x331, size=0x2, align=0x2 YMH0021: adding io range 0x370-0x371, size=0x2, align=0x2 YMH0021: adding irq mask 0x20 YMH0021: adding dma mask 0x1 YMH0021: adding dma mask 0x80 YMH0021: start dependant YMH0021: adding io range 0x240-0x24f, size=0x10, align=0x10 YMH0021: adding io range 0xe80-0xe87, size=0x8, align=0x8 YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8 YMH0021: adding io range 0x300-0x301, size=0x2, align=0x2 YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2 YMH0021: adding irq mask 0xea0 YMH0021: adding dma mask 0x3 YMH0021: adding dma mask 0x80 YMH0021: start dependant YMH0021: adding io range 0x220-0x28f, size=0x10, align=0x10 YMH0021: adding io range 0x530-0xf4f, size=0x8, align=0x8 YMH0021: adding io range 0x388-0x3ff, size=0x8, align=0x8 YMH0021: adding io range 0x300-0x335, size=0x2, align=0x2 YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2 YMH0021: adding irq mask 0xea8 YMH0021: adding dma mask 0x83 YMH0021: adding dma mask 0x83 YMH0021: end dependant YMH0022: start dependant YMH0022: adding io range 0x201-0x201, size=0x1, align=0x1 YMH0022: start dependant YMH0022: adding io range 0x202-0x202, size=0x1, align=0x1 YMH0022: start dependant YMH0022: adding io range 0x203-0x203, size=0x1, align=0x1 YMH0022: start dependant YMH0022: adding io range 0x204-0x20f, size=0x1, align=0x1 YMH0022: end dependant pnpbios: 17 devices, largest 222 bytes PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000 PNP0c01: adding fixed memory32 range 0xca000-0xcffff, size=0x6000 PNP0c01: adding fixed memory32 range 0x100000-0x4ffffff, size=0x4f00000 PNP0c01: end config pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x10-0x18, size=0x9, align=0x1 PNP0c02: adding io range 0x1f-0x1f, size=0x1, align=0x1 PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1 PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1 PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1 PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1 PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1 PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1 PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1 PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1 PNP0c02: adding io range 0x74-0x77, size=0x4, align=0x1 PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0x1 PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1 PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1 PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1 PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1 PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1 PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1 PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1 PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x1 PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1 PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 PNP0c02: end config pnpbios: handle 1 device ID PNP0c02 (020cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 PNP0200: end config pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 PNP0000: end config pnpbios: handle 3 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 PNP0100: end config pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 PNP0b00: end config pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 PNP0303: end config pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 PNP0c04: end config pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: end config pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1 PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1 PNP0c02: end config pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 PNP0501: end config pnpbios: handle 11 device ID PNP0501 (0105d041) NSC6001: adding dma mask 0x8 NSC6001: adding io range 0x2f8-0x2ff, size=0x8, align=0x1 NSC6001: adding irq mask 0x8 NSC6001: end config pnpbios: handle 12 device ID NSC6001 (0160633a) PNP0f13: adding irq mask 0x1000 PNP0f13: end config pnpbios: handle 15 device ID PNP0f13 (130fd041) PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8 PNP0400: adding irq mask 0x80 PNP0400: end config pnpbios: handle 18 device ID PNP0400 (0004d041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: end config pnpbios: handle 20 device ID PNP0700 (0007d041) PNP0e03: adding io range 0-0xffffffff, size=0, align=0 PNP0e03: end config pnpbios: handle 22 device ID PNP0e03 (030ed041) sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices ata2 failed to probe at port 0x1f0 irq 14 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: <HEWLETT-PACKARD DESKJET 880C> MLC,PCL,PML lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vpo0: can't connect to the drive imm0: (disconnect) s1=0xb8 s2=0x18, s3=0x30 vpo0: <Iomega Matchmaker Parallel to SCSI interface> on ppbus0 imm0: NIBBLE mode sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x61 0x71 0x61 0x61 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x61 0x69 0x61 0x61 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 sc1: no video adapter is found. sc1: <System console> failed to probe on isa0 vga1: <Generic ISA VGA> failed to probe on isa0 isa_probe_children: probing PnP devices unknown: <YAMAHA OPL3-SAx Audio System> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,7 on isa0 unknown: <YAMAHA OPL3-SAx Audio System> failed to probe at port 0x201 on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0501> can't assign resources unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <NSC6001> can't assign resources unknown: <NSC6001> at port 0x2f8-0x2ff on isa0 unknown: <PNP0f13> can't assign resources unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0400> can't assign resources unknown: <PNP0400> at port 0x378-0x37f on isa0 unknown: <PNP0700> can't assign resources unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 unknown: <PNP0e03> failed to probe at port 0x19 on isa0 BIOS Geometries: 0:03df7f3f 0..991=992 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: faith0 attached ata0-master: success setting UDMA2 on PIIX4 chip Creating DISK ad0 ad0: <TOSHIBA MK4006MAV/F2.03 A> ATA-4 disk at ata0-master ad0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 ad0: 3909MB <TOSHIBA MK4006MAV> [7944/16/63] at ata0-master UDMA33 (probe6:vpo0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe6:vpo0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:vpo0:0:6:0): Invalid field in CDB (probe6:vpo0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe6:vpo0:0:6:0): NOT READY asc:3a,0 (probe6:vpo0:0:6:0): Medium not present (probe6:vpo0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe6:vpo0:0:6:0): ILLEGAL REQUEST asc:24,0 (probe6:vpo0:0:6:0): Invalid field in CDB Creating DISK da0 (da0:vpo0:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:vpo0:0:6:0): NOT READY asc:3a,0 (da0:vpo0:0:6:0): Medium not present da0 at vpo0 bus 0 target 6 lun 0 da0: <IOMEGA ZIP 100 J.67> Removable Direct Access SCSI-2 device da0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s2a ad0s1: type 0x16, start 63, end = 4193279, size 4193217 : OK ad0s2: type 0xa5, start 4193280, end = 8007551, size 3814272 : OK pccbb0: card inserted: event=0x00000001, state=30000b29 pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: bad Vcc request. ctrl=0x0, status=0x30000b29 pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] pccbb0: bad Vcc request. ctrl=0x33, status=0x30000b20 pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] found-> vendor=0x1011, dev=0x0019, revid=0x41 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=0 TUPLE: LINKTARGET [3]: 43 49 53 Product version: 5.0 Product name: AmbiCom, Inc. | AMB8100 | Fast Ethernet CardBus PC Card | 1.00 | Manufacturer ID: 13958100 Functions: Network Adaptor, Multi-Functioned Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 0301 cardbus0: Opening BAR: type=IO, bar=10, len=0080 TUPLE: CONFIG_CB [7]: 03 01 00 00 00 00 ff TUPLE: CFTABLE_ENTRY_CB [5]: 41 80 fb 00 ff CIS reading done cardbus0: <unknown card> (vendor=0x1011, dev=0x0019) at 0.0 irq 0 pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: bad Vcc request. ctrl=0x0, status=0x30000b69 pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: card activation failed cardbus1: Detaching card: no cards to detach! pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] start_init: trying /sbin/init pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] pccbb0: bad Vcc request. ctrl=0x33, status=0x30000b20 pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11] TUPLE: LINKTARGET [3]: 43 49 53 Product version: 5.0 Product name: AmbiCom, Inc. | AMB8100 | Fast Ethernet CardBus PC Card | 1.00 | Manufacturer ID: 13958100 Functions: Network Adaptor, Multi-Functioned Function Extension: 0102 Function Extension: 0280969800 Function Extension: 0200e1f505 Function Extension: 0301 cardbus0: Opening BAR: type=IO, bar=10, len=0080 TUPLE: CONFIG_CB [7]: 03 01 00 00 00 00 ff TUPLE: CFTABLE_ENTRY_CB [5]: 41 80 fb 00 ff CIS reading done dc0: <Intel 21143 10/100BaseTX> port 0x3000-0x307f mem 0x44040000-0x4407ffff,0x44002000-0x440023ff irq 11 at device 0.0 on cardbus0 dc0: Ethernet address: 00:80:00:80:00:80 bpf: dc0 attached pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] miibus0: <MII bus> on dc0 dcphy0: <Intel 21143 NWAY media interface> on miibus0 dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout splash: image decoder found: logo_saver Linux ELF exec handler installed dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout dc0: watchdog timeout --=====================_10962493==_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.2.20010121190509.00c05f00>