Date: Thu, 19 Feb 2004 12:12:25 -0300 From: Cristiano Duarte <cunha17@uol.com.br> To: aic7xxx@freebsd.org Subject: BUG introduced in kernels above 2.4.18 ? Message-ID: <4034D259.5050001@uol.com.br>
next in thread | raw e-mail | index | archive | help
Hi all, [1.] One line summary of the problem: I'm experiencing some problem with my Sceptre S1200(scsi) scanner, my Adaptec AHA-2940UW and kernels above 2.4.18. [2.] Full description of the problem/report: With RedHat 9, kernel 2.4.20, my scanner is recognized by the kernel, but the sane-find-scanner and scanimage utility get garbage when talking to it. So I installed Fedora Core 1, and tested with kernel 2.4.22(Fedora) and "vanilla" 2.4.24. I got these error messages on boot: Feb 13 17:53:15 thor kernel: SCSI subsystem driver Revision: 1.00 Feb 13 17:53:15 thor kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 Feb 13 17:53:15 thor kernel: <Adaptec 2940 Ultra SCSI adapter> Feb 13 17:53:15 thor kernel: aic7880: Ultra Wide Channel A, SCSI Id=15, 16/253 SCBs Feb 13 17:53:15 thor kernel: Feb 13 17:53:15 thor kernel: blk: queue c130d574, I/O limit 4095Mb (mask 0xffffffff) Feb 13 17:53:15 thor kernel: (scsi0:A:3:0): Unexpected busfree while idle Feb 13 17:53:15 thor kernel: SEQADDR == 0x156 Feb 13 17:53:15 thor kernel: (scsi0:A:3:0): No or incomplete CDB sent to device. Feb 13 17:53:15 thor kernel: scsi0: Issued Channel A Bus Reset. 1 SCBs aborted Feb 13 17:53:15 thor kernel: (scsi0:A:6:0): No or incomplete CDB sent to device. Feb 13 17:53:15 thor kernel: (scsi0:A:6:0): Protocol violation in Message-in phase. Attempting to abort. Feb 13 17:53:15 thor kernel: (scsi0:A:6:0): Abort Message Sent Feb 13 17:53:15 thor kernel: Vendor: KINPO Model: Vivi(scsi0:A:3:0): Unexpected busfree while idle Feb 13 17:53:15 thor kernel: SEQADDR == 0x156 Feb 13 17:53:15 thor kernel: dscan S120 Rev: S13 Feb 13 17:53:15 thor kernel: Type: Scanner ANSI SCSI revision: 02 Feb 13 17:53:15 thor kernel: blk: queue c130d674, I/O limit 4095Mb (mask 0xffffffff) Feb 13 17:53:15 thor kernel: (scsi0:A:3:0): No or incomplete CDB sent to device. Feb 13 17:53:15 thor kernel: scsi0: Issued Channel A Bus Reset. 1 SCBs aborted Feb 13 17:53:15 thor kernel: Vendor: IOMEGA Model: ZIP 100 Rev: J.02 Feb 13 17:53:15 thor kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 13 17:53:15 thor kernel: blk: queue c130da74, I/O limit 4095Mb (mask 0xffffffff) Feb 13 17:53:15 thor kernel: Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0 Feb 13 17:53:15 thor kernel: scsi0:0:6:0: Attempting to queue an ABORT message Feb 13 17:53:15 thor kernel: CDB: 0x0 0x0 0x0 0x0 0x0 0x0 Feb 13 17:53:15 thor kernel: scsi0: At time of recovery, card was not paused Feb 13 17:53:15 thor kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Feb 13 17:53:15 thor kernel: scsi0: Dumping Card State in Message-out phase, at SEQADDR 0x156 Feb 13 17:53:15 thor kernel: Card was paused Feb 13 17:53:15 thor kernel: ACCUM = 0xa0, SINDEX = 0xc0, DINDEX = 0xc0, ARG_2 = 0x1 Feb 13 17:53:15 thor kernel: HCNT = 0x0 SCBPTR = 0x0 Feb 13 17:53:15 thor kernel: SCSISIGI[0xa6] ERROR[0x0] SCSIBUSL[0xc0] LASTPHASE[0xa0] Feb 13 17:53:15 thor kernel: SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0x0] SEQCTL[0x10] Feb 13 17:53:15 thor kernel: SEQ_FLAGS[0x40] SSTAT0[0x5] SSTAT1[0x2] SSTAT2[0x0] Feb 13 17:53:15 thor kernel: SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0x88] Feb 13 17:53:15 thor kernel: DFCNTRL[0x4] DFSTATUS[0x6d] Feb 13 17:53:15 thor kernel: STACK: 0xbc 0x52 0x150 0x191 Feb 13 17:53:15 thor kernel: SCB count = 5 Feb 13 17:53:15 thor kernel: Kernel NEXTQSCB = 3 Feb 13 17:53:15 thor kernel: Card NEXTQSCB = 3 Feb 13 17:53:15 thor kernel: QINFIFO entries: Feb 13 17:53:15 thor kernel: Waiting Queue entries: Feb 13 17:53:15 thor kernel: Disconnected Queue entries: Feb 13 17:53:15 thor kernel: QOUTFIFO entries: Feb 13 17:53:15 thor kernel: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Feb 13 17:53:15 thor kernel: Sequencer SCB Info: Feb 13 17:53:15 thor kernel: 0 SCB_CONTROL[0x40] SCB_SCSIID[0x6f] SCB_LUN[0x0] SCB_TAG[0x4] Feb 13 17:53:15 thor kernel: 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:11 thor sysctl: kernel.core_uses_pid = 1 Feb 13 17:53:15 thor kernel: 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:11 thor network: Configurando parāmetros de rede: succeeded Feb 13 17:53:15 thor kernel: 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:11 thor network: Iniciando a interface 'loopback': succeeded Feb 13 17:53:15 thor kernel: 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] Feb 13 17:53:15 thor kernel: Pending list: Feb 13 17:53:15 thor kernel: 4 SCB_CONTROL[0x40] SCB_SCSIID[0x6f] SCB_LUN[0x0] Feb 13 17:53:15 thor kernel: Kernel Free SCB list: 2 1 0 Feb 13 17:53:15 thor kernel: Untagged Q(6): 4 Feb 13 17:53:15 thor kernel: DevQ(0:3:0): 0 waiting Feb 13 17:53:15 thor kernel: DevQ(0:6:0): 0 waiting Feb 13 17:53:15 thor kernel: Feb 13 17:53:15 thor kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> Feb 13 17:53:15 thor kernel: scsi0:0:6:0: Device is active, asserting ATN Feb 13 17:53:15 thor kernel: Recovery code sleeping Feb 13 17:53:15 thor kernel: Recovery code awake Feb 13 17:53:15 thor kernel: Timer Expired Feb 13 17:53:15 thor kernel: aic7xxx_abort returns 0x2003 Feb 13 17:53:15 thor kernel: scsi0:0:6:0: Attempting to queue a TARGET RESET message Feb 13 17:53:15 thor kernel: CDB: 0x0 0x0 0x0 0x0 0x0 0x0 Feb 13 17:53:15 thor kernel: aic7xxx_dev_reset returns 0x2003 Feb 13 17:53:15 thor kernel: Recovery SCB completes Feb 13 17:53:15 thor kernel: Device not ready. Make sure there is a disc in the drive. Feb 13 17:53:15 thor kernel: sda: Unit Not Ready, sense: Feb 13 17:53:15 thor kernel: Current 00:00: sense key Not Ready Feb 13 17:53:15 thor kernel: Additional sense indicates Medium not present Feb 13 17:53:15 thor kernel: sda : READ CAPACITY failed. Feb 13 17:53:16 thor kernel: sda : status = 1, message = 00, host = 0, driver = 08 Feb 13 17:53:16 thor kernel: Current sd00:00: sense key Not Ready Feb 13 17:53:16 thor kernel: Additional sense indicates Medium not present Feb 13 17:53:16 thor kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Feb 13 17:53:16 thor kernel: sda: I/O error: dev 08:00, sector 0 Feb 13 17:53:16 thor kernel: I/O error: dev 08:00, sector 0 Feb 13 17:53:16 thor kernel: unable to read partition table The sane-find-scanner reports protocol violations on syslog and can't find the scanner. The scanner isn't recognized, and gets missing in /proc/scsi/scsi. So I tried downgrading just the kernel to version 2.4.18(Redhat 7.3 kernel) and everything works! The kernel recognizes the scanner without complaining(it appears in /proc/scsi/scsi) and the sane-find-scanner and scanimage utilities find and recognizes my scanner. After that, I downloaded two BIOS updates from Adaptec and applied them to my Adaptec card. But, even with these updates, everything is the same for kernels above 2.4.18. That said, IMHO there's something wrong in aic7xxx module(or scsi subsystem) in kernel versions above 2.4.18. [3.] Keywords aic7xxx, aha2940uw, scsi, protocol violation [4.] Kernel version (from /proc/version): Linux version 2.4.24savage (root@thor.home) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #3 Sex Fev 13 13:23:47 BRST 2004 Also happended with 2.4.22(Fedora Core) and 2.4.20(RedHat 9) kernels. [5.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) Not applicable [6.] A small shell script or example program which triggers the problem (if possible) Boot problem and "sane-find-scanner -v -v -v" problem. [7.] Environment [7.1.] Software (add the output of the ver_linux script here) OS: Fedora Core 1 - "vanilla" kernel 2.4.24/2.4.22(Fedora)/2.4.20(RedHat9)/2.4.18(RedHat7.3) Scanner: Sceptre S1200 scanner (KINPO VIVIDSCAN) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux thor.home 2.4.24savage #3 Sex Fev 13 13:23:47 BRST 2004 i686 i686 i386 GNU/Linux Gnu C 3.3.2 Gnu make 3.79.1 util-linux 2.11y mount 2.11y modutils 2.4.25 e2fsprogs 1.34 jfsutils 1.1.3 reiserfsprogs 3.6.8 quota-tools 3.06. PPP 2.4.1 isdn4k-utils 3.3 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.17 Net-tools 1.60 Kbd 1.08 Sh-utils 5.0 Modules Loaded nls_cp437 vfat fat nls_iso8859-1 udf snd-emu10k1 snd-rawmidi snd-util-mem snd-hwdep snd-ac97-codec snd-pcm-oss snd-pcm snd-page-alloc snd-timer snd-mixer-oss snd-seq-device snd soundcore ide-cd cdrom parport_pc lp parport autofs 8139too mii floppy sg microcode keybdev mousedev input hid usb-uhci usbcore thermal processor fan button battery asus_acpi ac ext3 jbd aic7xxx sd_mod scsi_mod [7.2.] Processor information (from /proc/cpuinfo): processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 10 cpu MHz : 938.046 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1874.32 [7.3.] Module information (from /proc/modules): nls_cp437 5148 1 (autoclean) vfat 13068 1 (autoclean) fat 38200 0 (autoclean) [vfat] nls_iso8859-1 3516 2 (autoclean) udf 98336 0 (autoclean) snd-emu10k1 86212 0 (autoclean) snd-rawmidi 18784 0 (autoclean) [snd-emu10k1] snd-util-mem 3096 0 (autoclean) [snd-emu10k1] snd-hwdep 7008 0 (autoclean) [snd-emu10k1] snd-ac97-codec 58796 0 (autoclean) [snd-emu10k1] snd-pcm-oss 45028 0 (autoclean) snd-pcm 85700 0 (autoclean) [snd-emu10k1 snd-pcm-oss] snd-page-alloc 10196 0 (autoclean) [snd-emu10k1 snd-pcm] snd-timer 19876 0 (autoclean) [snd-pcm] snd-mixer-oss 16496 0 (autoclean) [snd-pcm-oss] snd-seq-device 6300 0 (autoclean) [snd-emu10k1 snd-rawmidi] snd 46244 0 (autoclean) [snd-emu10k1 snd-rawmidi snd-util-mem snd-hwdep snd-ac97-codec snd-pcm-oss snd-pcm snd-timer snd-mixer-oss snd-seq-device] soundcore 6468 6 (autoclean) [snd] ide-cd 35648 1 (autoclean) cdrom 33280 0 (autoclean) [ide-cd] parport_pc 19108 1 (autoclean) lp 9124 0 (autoclean) parport 37128 1 (autoclean) [parport_pc lp] autofs 13076 0 (autoclean) (unused) 8139too 16360 1 mii 3880 0 [8139too] floppy 57692 0 (autoclean) sg 36412 0 (autoclean) microcode 4700 0 (autoclean) keybdev 2948 0 (unused) mousedev 5524 1 input 5760 0 [keybdev mousedev] hid 12344 0 (unused) usb-uhci 26480 0 (unused) usbcore 78700 1 [hid usb-uhci] thermal 8068 0 (unused) processor 10712 0 [thermal] fan 2496 0 (unused) button 3628 0 (unused) battery 6976 0 (unused) asus_acpi 9580 0 (unused) ac 2752 0 (unused) ext3 70340 1 jbd 52056 1 [ext3] aic7xxx 162096 0 sd_mod 13484 0 scsi_mod 107424 3 [sg aic7xxx sd_mod] [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 a000-a01f : Intel Corp. 82801BA/BAM USB (Hub #2) a000-a01f : usb-uhci a400-a41f : Intel Corp. 82801BA/BAM USB (Hub #1) a400-a41f : usb-uhci a800-a80f : Intel Corp. 82801BA IDE U100 a800-a807 : ide0 a808-a80f : ide1 b800-b8ff : Adaptec AHA-2940U/UW/D / AIC-7881U d000-d007 : Creative Labs SB Live! MIDI/Game Port d400-d41f : Creative Labs SB Live! EMU10k1 d400-d41f : EMU10K1 d800-d8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ d800-d8ff : 8139too e800-e80f : Intel Corp. 82801BA/BAM SMBus /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cc000-000cc7ff : Extension ROM 000f0000-000fffff : System ROM 00100000-0ffeafff : System RAM 00100000-0026b9b1 : Kernel code 0026b9b2-002eec43 : Kernel data 0ffeb000-0ffeefff : ACPI Tables 0ffef000-0fffefff : reserved 0ffff000-0fffffff : ACPI Non-volatile Storage e2800000-e2800fff : Adaptec AHA-2940U/UW/D / AIC-7881U e2800000-e2800fff : aic7xxx e3000000-e30000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ e3000000-e30000ff : 8139too e3800000-e3800fff : Zoran Corporation ZR36057PQC Video cutting chipset e4000000-f3dfffff : PCI Bus #01 e4000000-e7ffffff : S3 Inc. 86C410 Savage 2000 e8000000-ebffffff : S3 Inc. 86C410 Savage 2000 ec000000-efffffff : S3 Inc. 86C410 Savage 2000 f3000000-f307ffff : S3 Inc. 86C410 Savage 2000 f3f00000-f7ffffff : PCI Bus #01 f4000000-f7ffffff : S3 Inc. 86C410 Savage 2000 f8000000-fbffffff : Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub fff80000-ffffffff : reserved [7.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) Subsystem: Asustek Computer, Inc. TUSL2-C Mainboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [88] #09 [f104] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000dfff Memory behind bridge: e4000000-f3dfffff Prefetchable memory behind bridge: f3f00000-f7ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000b000-0000dfff Memory behind bridge: e2800000-e3ffffff Prefetchable memory behind bridge: f3e00000-f3efffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02) (prog-if 80 [Master]) Subsystem: Asustek Computer, Inc. TUSL2-C Mainboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at a800 [size=16] 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at a400 [size=32] 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 02) Subsystem: Asustek Computer, Inc. TUSL2-C Mainboard Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 9 Region 4: I/O ports at e800 [size=16] 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI]) Subsystem: Asustek Computer, Inc.: Unknown device 8027 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 4 Region 4: I/O ports at a000 [size=32] 01:00.0 VGA compatible controller: S3 Inc. 86C410 Savage 2000 (rev 02) (prog-if 00 [VGA]) Subsystem: Diamond Multimedia Systems Viper II Z200 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3000ns min, 4000ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=512K] Region 1: Memory at f4000000 (32-bit, prefetchable) [size=64M] Region 2: Memory at ec000000 (32-bit, non-prefetchable) [size=64M] Region 3: Memory at e8000000 (32-bit, non-prefetchable) [size=64M] Region 4: Memory at e4000000 (32-bit, non-prefetchable) [size=64M] Expansion ROM at f3ff0000 [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 02:0a.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video cutting chipset (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 4000ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3800000 (32-bit, non-prefetchable) [size=4K] 02:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 4 Region 0: I/O ports at d800 [size=256] Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=256] 02:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) Subsystem: Creative Labs SB Live! 5.1 Model SB0100 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d400 [size=32] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07) Subsystem: Creative Labs Gameport Joystick Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: I/O ports at d000 [size=8] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0e.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 01) Subsystem: Adaptec AHA-2940UW SCSI Host Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at b800 [disabled] [size=256] Region 1: Memory at e2800000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [7.6.] SCSI information (from /proc/scsi/scsi) Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: IOMEGA Model: ZIP 100 Rev: J.02 Type: Direct-Access ANSI SCSI revision: 02 [7.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): [X.] Other notes, patches, fixes, workarounds:. No workaround except kernel downgrading to 2.4.18. Best Regards, Cristiano Duarte
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4034D259.5050001>