Date: Sun, 18 Jul 2004 08:42:34 -0600 From: Scott Long <scottl@samsco.org> To: "Bjoern A. Zeeb" <bzeeb-lists@lists.zabbadoz.net> Cc: freebsd-scsi@freebsd.org Subject: Re: adaptec 29160 as module (on amd64) ? Message-ID: <40FA8C5A.601@samsco.org> In-Reply-To: <Pine.BSF.4.53.0407181423090.43309@e0-0.zab2.int.zabbadoz.net> References: <Pine.BSF.4.53.0407181423090.43309@e0-0.zab2.int.zabbadoz.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Bjoern A. Zeeb wrote: > Hi, > > I got a 29160 (no extension) and put it in my amd64 machine; > ahc is currently compiled as module and not into kernel. > > kldload -v ahc > loads ahc and cam but gives nothing in dmesg: > > amd64# kldstat | egrep -E '(ahc|cam)' > 3 1 0xffffffffa7b2d000 19bde ahc.ko > 4 2 0xffffffffa7b47000 2a98e cam.ko > amd64# dmesg | egrep -i -E '(adaptec|ahc)' > amd64# > > > here is the output of > > amd64# pciconf -l -v > none2@pci0:14:0: class=0x010000 card=0xe2a09005 chip=0x00809005 rev=0x02 hdr=0x00 > vendor = 'Adaptec Inc' > device = '29160/N/LP Ultra160 (AIC-7892A) SCSI Host Adapter' > class = mass storage > subclass = SCSI > > and > > amd64# camcontrol devlist -v > scbus-1 on xpt0 bus 0: > < > at scbus-1 target -1 lun -1 (xpt0) > > I does not recognize the attached DLT8000. > > Giving <ctrl>+<a> while booting does recognize the tape device. > > Either I am missing something or ahc is not supposed to be > working as module (on amd64) ? > I don't know of any reason why the ahc driver would behave any differently on amd64 vs any other platform. Unfortunately, amd64 doesn't fully support kernel modules yet. This is rumored to be fixed in time for 5.3. Scott
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40FA8C5A.601>