Date: Thu, 22 Jul 2004 10:32:20 +0100 From: George Barnett <george@alink.co.za> To: stable@freebsd.org Subject: ATA errors Message-ID: <40FF89A4.4030508@alink.co.za>
next in thread | raw e-mail | index | archive | help
Hi All,
I'm having a few issues and I could use another brain on this. I have a
machine which is throwing up ata errors like this:
Jul 22 00:16:16 <kern.crit> mail /kernel: ad2s1e: soft error (ECC
corrected) reading fsbn 77465920 of 38732960-38733087 (ad2s1 bn
77465920; cn 461106 tn 18 sn 4)ad2s1e: hard error reading fsbn 77465920
of 38732960-38733087 (ad2s1 bn 77465920; cn 461106 tn 18 sn 4)ad2:
timeout waiting for cmd=ef s=00 e=7f
Jul 22 00:16:16 <kern.crit> mail /kernel: trying PIO mode
Jul 22 00:16:18 <kern.crit> mail /kernel: ad2s1e: soft error (ECC
corrected) reading fsbn 77465920 of 38732960-38733087 (ad2s1 bn
77465920; cn 461106 tn 18 sn 4)ad2s1e: hard error reading fsbn 77465920
of 38732960-38733087 (ad2s1 bn 77465920; cn 461106 tn 18 sn 4) status=7f
error=7f
Jul 22 00:16:18 <kern.crit> mail /kernel: ad2: timeout waiting for DRQ -
resetting
Jul 22 00:16:18 <kern.crit> mail /kernel: ata1: resetting devices ..
Jul 22 00:16:18 <kern.crit> mail /kernel: ad2: removed from configuration
Jul 22 00:16:18 <kern.crit> mail /kernel: done
It was doing this a few weeks ago, so I swapped the disk out and it was
happy for a bit. Now it's coming back and doing it on the new disk
(which is in the same place as the old one (sec-master)).
I figure this means the controller has gone bork?
relevant bits of dmesg:
atapci0: <Intel ICH ATA66 controller> port 0xf000-0xf00f at device 31.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ad0: 19541MB <Maxtor 2B020H1> [39703/16/63] at ata0-master UDMA66
ad2: 76293MB <Maxtor 6Y080L0> [155009/16/63] at ata1-master UDMA66
FreeBSD dexter.alink.co.za 4.9-RELEASE-p10 FreeBSD 4.9-RELEASE-p10 #0:
Fri Jun 11 17:16:17 BST 2004
george@dexter.alink.co.za:/usr/obj/usr/src/sys/DEXTER i386
atapci0@pci0:31:1: class=0x010180 card=0x24118086 chip=0x24118086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801AA IDE Controller (UltraATA/66)'
class = mass storage
subclass = ATA
ATA channel 0:
Master: ad0 <Maxtor 2B020H1/WAH21PB0> ATA/ATAPI rev 6
Slave: no device present
ATA channel 1:
Master: ad2 <Maxtor 6Y080L0/YAR41BW0> ATA/ATAPI rev 7
Slave: no device present
Any advice would be appreciated, but please cc me in a reply.
Many thanks :)
George
--
George Barnett
Reality Engineer & Explorer
e: george@alink.co.za
m: +44 778 884 7205
Things must be as they may
- William Shakespear, Henry V
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40FF89A4.4030508>