Date: Fri, 08 Oct 2004 20:47:14 +0700 From: Muhammad Reza <reza@mra.co.id> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: RAID 1 in HP NetServer LC 2000 Message-ID: <41669A62.9040700@mra.co.id>
next in thread | raw e-mail | index | archive | help
Dear All, Howto setup RAID 1 in HP NetServer LC 2000 ? I have 2 Seagate HDD that want to be mirror 1:1, Can i do that from Symbios software or tool from my FreeBSD 4.10 ? regards reza ---snip--- sym0: <896> port 0x2000-0x20ff mem 0xfd000000-0xfd001fff,0xfd002000-0xfd0023ff irq 11 at device 6.0 on pci3 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym1: <896> port 0x2400-0x24ff mem 0xfd004000-0xfd005fff,0xfd002400-0xfd0027ff irq 5 at device 6.1 on pci3 sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. ---snap--- . . --snip-- da0 at sym1 bus 0 target 0 lun 0 da0: <SEAGATE ST318405LW 5063> Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da1 at sym1 bus 0 target 1 lun 0 da1: <SEAGATE ST318405LW 5063> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) ---snap---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41669A62.9040700>