Date: Tue, 30 Nov 2004 09:10:02 +1300 From: Mark Kirkwood <markir@paradise.net.nz> To: Chris Wall <chris.wall@cbrworld.com>, stacey@vickiandstacey.com Cc: freebsd-stable@freebsd.org Subject: Re: Cannot install 5.3 on tyan tiger 133 Message-ID: <41AB821A.6060305@paradise.net.nz> In-Reply-To: <41AB4E3A.5040604@cbrworld.com> References: <41AACD27.6030506@paradise.net.nz> <41AB44E9.80904@cbrworld.com> <20041129161318.GR12622@crom.vickiandstacey.com> <41AB4E3A.5040604@cbrworld.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Chris Wall wrote: > Yes, I first upgraded from 5.2, then I did a fresh install from the > 5.3-RELEASE CDs and didn't experence a problem on either method. I > also have a Tyan 230T that was talked about in this thread that didn't > give me any problems either. Now all I run on this server is a web > site, so it is base install plus Apache, PHP, etc. - no X or > desktops. I remember that there were two types of Tiger 133's one > with ISA and one without (mine is without ISA slot). > Chris My 133 is the same (S1834D - printing on the board for an ISA but no actual slot). What revision is your board? After reading of your experiences, the following scenarios suggest themselves: - Booting from cd with the Promise TX2000 Raid card removed - Booting from cd with 1 cpu removed (with or without the TX2000) - (Assuming some of the above work) Moving the TX2000 to a different PCI slot and booting I will let you know how I get on. In the meantime, here is a dmesg output from when 4.10 was installed: http://www.bnv-bamberg.de/home/ba3294/smp/files/dmesg/d000233.txt and output from mptable : http://www.bnv-bamberg.de/home/ba3294/smp/files/mptable/m000233.txt (Thanks to Gregor Bittel for maintaining such an handy list!) regards Mark
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41AB821A.6060305>