Date: Tue, 15 Mar 2005 01:20:51 -0800 From: Octavian Hornoiu <octavian@hacknslash.org> To: freebsd-geom@freebsd.org Subject: gmirror cannot update metadata on disk da0s1 Message-ID: <4236A8F3.8090105@hacknslash.org>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------040408070302030509030706 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit I have followed the instructions as per the document at http://people.freebsd.org/~rse/mirror/ to setup my geom mirror using FreeBSD 5.3-p5 and two 70 gig SCSI maxtor drives of identical size. I have tried both the whole partition gm0 and single slice gm0s1 alternatives to mirroring the drives and I have tried both hardcoding and without hardcoding and I still get cannot update metadata or cannot read metadata or cannot write metadata. The drive with metadata problems will change depending with the setup so sometimes da0 works fine and da1 is broken or vice versa. There does not seem to be a pattern to this. I have worked with vinum many times before and I'm not inexperience but I have reached the end of the road with gmirror. I've tried 8 times to mirror these disks now with different configurations and I've failed every time. I have even alternated the sizes of the slices and left room at the end of the drive, at the beginning of the drive, etc. Here are the appropriate informational dumps: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE-p5 #0: Wed Feb 23 16:19:57 PST 2005 root@capone.bellevuechristian.org:/usr/obj/usr/src/sys/CAPONE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2147221504 (2047 MB) avail memory = 2095755264 (1998 MB) ACPI APIC Table: <DELL PE BKC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic1: WARNING: intbase 32 != expected base 24 ioapic2: Changing APIC ID to 10 ioapic2: WARNING: intbase 64 != expected base 56 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard netsmb_dev: loaded npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE BKC> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 0xdfde0000-0xdfdeffff,0xdfdf0000-0xdfdfffff irq 34 at device 5.0 on pci3 mpt0: [GIANT-LOCKED] em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xe8c0-0xe8ff mem 0xdfdc0000-0xdfddffff irq 39 at device 12.0 on pci3 em0: Ethernet address: 00:0e:0c:69:3a:44 em0: Speed:N/A Duplex:N/A pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib6 em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdcc0-0xdcff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6 em1: Ethernet address: 00:11:43:d7:64:2e em1: Speed:N/A Duplex:N/A pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 pci7: <ACPI PCI bus> on pcib7 em2: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xccc0-0xccff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7 em2: Ethernet address: 00:11:43:d7:64:2f em2: Speed:N/A Duplex:N/A pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci8: <ACPI PCI bus> on pcib8 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2 uhub2: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <display, VGA> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xcb000-0xcefff,0xc0000-0xcafff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33 Waiting 15 seconds for SCSI devices to settle ses0 at mpt0 bus 0 target 6 lun 0 ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device da0 at mpt0 bus 0 target 0 lun 0 da0: <MAXTOR ATLAS10K5_73SCA JNZ6> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C) da1 at mpt0 bus 0 target 1 lun 0 da1: <MAXTOR ATLAS10K5_73SCA JNZ6> Fixed Direct Access SCSI-3 device da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da1: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C) GEOM_MIRROR: Device gm0s1 created (id=1445021139). GEOM_MIRROR: Device gm0s1: provider da0s1 detected. GEOM_MIRROR: Device gm0s1: provider da1s1 detected. GEOM_MIRROR: Device gm0s1: provider da1s1 activated. GEOM_MIRROR: Cannot update metadata on disk da0s1 (error=1). GEOM_MIRROR: Device gm0s1: provider da0s1 activated. GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched. GEOM_MIRROR: Cannot update metadata on disk da0s1 (error=1). GEOM_MIRROR: Device gm0s1: provider da0s1 disconnected. SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Mounting root from ufs:/dev/mirror/gm0s1a em0: Link is up 100 Mbps Full Duplex Metadata on /dev/da1s1: magic: GEOM::MIRROR version: 1 name: gm0s1 mid: 1445021139 did: 4266048836 all: 2 syncid: 3 priority: 0 slice: 4096 balance: round-robin mediasize: 73402365952 sectorsize: 512 syncoffset: 0 mflags: NONE dflags: DIRTY hcprovider: da1s1 MD5 hash: c082817f594eb795a95ebb547bb20f71 Metadata on /dev/da0s1: magic: GEOM::MIRROR version: 1 name: gm0s1 mid: 1445021139 did: 1764218562 all: 2 syncid: 3 priority: 0 slice: 4096 balance: round-robin mediasize: 73402365952 sectorsize: 512 syncoffset: 22164275200 mflags: NONE dflags: DIRTY SYNCHRONIZING hcprovider: da0s1 MD5 hash: 74f4f6b2cc14a5624539431c455cab81 Geom name: gm0s1 State: DEGRADED Components: 2 Balance: round-robin Slice: 4096 Flags: NONE SyncID: 5 ID: 1445021139 Providers: 1. Name: mirror/gm0s1 Mediasize: 73402365952 (68G) Sectorsize: 512 Mode: r6w6e1 Consumers: 1. Name: da1s1 Mediasize: 73402366464 (68G) Sectorsize: 512 Mode: r6w6e2 State: ACTIVE Priority: 0 Flags: DIRTY, HARDCODED SyncID: 5 ID: 4266048836 Geom name: gm0s1.sync ******* Working on device /dev/da1 ******* parameters extracted from in-core disklabel are: cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=8924 heads=255 sectors/track=63 (16065 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 143363997 (70001 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 1023/ head 254/ sector 63 The data for partition 2 is: <UNUSED> The data for partition 3 is: <UNUSED> The data for partition 4 is: <UNUSED> # /dev/mirror/gm0s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 1024000 0 4.2BSD 2048 16384 64008 b: 8388608 1024000 swap c: 143363996 0 unused 0 0 # "raw" part, don't ed$ d: 8388608 9412608 4.2BSD 2048 16384 28552 e: 4194304 17801216 4.2BSD 2048 16384 28552 f: 10240000 21995520 4.2BSD 2048 16384 28552 g: 110182400 32235520 4.2BSD 2048 16384 28552 Any help would be greatly appreciated! I am ready to pull my hair out and I'm already going bald so that would be bad! Octavian Hornoiu --------------040408070302030509030706--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4236A8F3.8090105>