Date: Sun, 28 Aug 2005 20:59:19 +1200 From: Mark Kirkwood <markir@paradise.net.nz> To: freebsd-smp@freebsd.org Subject: Re: 6.0 BETA3 reboot hangs on SMP system if BIOS USB disabled Message-ID: <43117CE7.9040703@paradise.net.nz> In-Reply-To: <431125D9.2090401@paradise.net.nz> References: <431125D9.2090401@paradise.net.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------040409010908060104000808 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sorry - I attached the wrong dmesg (same machine, but running 5.4 doh!) FWIW here are two dmesg, one with usb disabled (from 3 Aug, so is still BETA2) and one with usb enabled (from 24 Aug). Mark Kirkwood wrote: > I had previously posted something very similar to -current with BETA2, > but received no replies. Also the SMP factor might make this more > appropriate here :-) > > Tyan S2510 dual PIII 6.0-BETA3 (dmesg attached for case with USB disabled): > --------------040409010908060104000808 Content-Type: text/plain; name="dmesg.nousb" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.nousb" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA2 #0: Wed Aug 3 08:22:24 UTC 2005 root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (996.85-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 2147483648 (2048 MB) avail memory = 2096541696 (1999 MB) MPTable: <AMI CNB30LE > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Assuming intbase of 0 ioapic1: Assuming intbase of 16 ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <display, VGA> at device 1.0 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfeafe000-0xfeafefff,0xfe900000-0xfe9fffff irq 20 at device 4.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:81:02:4c:6a fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfeafd000-0xfeafdfff,0xfe700000-0xfe7fffff irq 21 at device 5.0 on pci0 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:e0:81:02:4c:6b isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfffff000-0xffffffff at device 15.2 on pci0 pcib0: unable to route slot 15 INTA ohci0: Could not allocate irq device_attach: ohci0 attach returned 6 pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard pci1: <PCI bus> on pcib1 atapci1: <Promise PDC20271 UDMA133 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f mem 0xfebf0000-0xfebfffff irq 27 at device 2.0 on pci1 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) Timecounters tick every 1.000 msec acd0: CDRW <CREATIVE CD-RW RW8439E/1R09> at ata0-master PIO4 ad4: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-master UDMA133 ad5: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-slave UDMA133 ad6: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-master UDMA133 ad7: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-slave UDMA133 ATA PseudoRAID loaded ar0: 156822MB <Promise Fasttrak RAID0 (stripe 256 KB)> status: READY ar0: disk0 READY using ad4 at ata2-master ar0: disk1 READY using ad6 at ata3-master ar0: disk2 READY using ad5 at ata2-slave ar0: disk3 READY using ad7 at ata3-slave SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ar0s2a lock order reversal 1st 0xc097b240 UMA lock (UMA lock) @ /usr/src/sys/vm/uma_core.c:1494 2nd 0xc1060144 system map (system map) @ /usr/src/sys/vm/vm_map.c:2317 KDB: stack backtrace: kdb_backtrace(0,ffffffff,c0930358,c0930498,c08bace4) at kdb_backtrace+0x29 witness_checkorder(c1060144,9,c08714b6,90d) at witness_checkorder+0x564 _mtx_lock_flags(c1060144,0,c08714b6,90d) at _mtx_lock_flags+0x5b _vm_map_lock(c10600c0,c08714b6,90d) at _vm_map_lock+0x26 vm_map_remove(c10600c0,c365b000,c365c000,e6a40c08,c077ee01) at vm_map_remove+0x1f kmem_free(c10600c0,c365b000,1000,e6a40c38,c077e7ae) at kmem_free+0x25 page_free(c365b000,1000,2) at page_free+0x29 zone_drain(c104a780) at zone_drain+0x26a zone_foreach(c077e544,e6a40cec,c079062f,c354a300,e6a40c74) at zone_foreach+0x37 uma_reclaim(c354a300,e6a40c74,0,c0926980,e6a40c80) at uma_reclaim+0x12 vm_pageout_scan(0,c097b6a0,0,c08729a3,5c3) at vm_pageout_scan+0x103 vm_pageout(0,e6a40d38,0,c07913e8,0) at vm_pageout+0x2c3 fork_exit(c07913e8,0,e6a40d38) at fork_exit+0xa0 fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xe6a40d6c, ebp = 0 --- --------------040409010908060104000808 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA3 #4: Wed Aug 24 21:05:50 NZST 2005 postgres@ikker.markir.net:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (996.85-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 2147483648 (2048 MB) avail memory = 2096541696 (1999 MB) MPTable: <AMI CNB30LE > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Assuming intbase of 0 ioapic1: Assuming intbase of 16 ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <display, VGA> at device 1.0 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfeafe000-0xfeafefff,0xfe900000-0xfe9fffff irq 20 at device 4.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:e0:81:02:4c:6a fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfeafd000-0xfeafdfff,0xfe700000-0xfe7fffff irq 21 at device 5.0 on pci0 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:e0:81:02:4c:6b isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 10 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <MPTable Host-PCI bridge> pcibus 1 on motherboard pci1: <PCI bus> on pcib1 atapci1: <Promise PDC20271 UDMA133 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f mem 0xfebf0000-0xfebfffff irq 27 at device 2.0 on pci1 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff,0xd1800-0xd27ff,0xd2800-0xd37ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) Timecounters tick every 1.000 msec acd0: CDRW <CREATIVE CD-RW RW8439E/1R09> at ata0-master PIO4 ad4: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-master UDMA133 ad5: 39205MB <Maxtor 6E040L0 NAR61HA0> at ata2-slave UDMA133 ad6: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-master UDMA133 ad7: 39205MB <Maxtor 6E040L0 NAR61590> at ata3-slave UDMA133 ar0: 156822MB <Promise Fasttrak RAID0 (stripe 256 KB)> status: READY ar0: disk0 READY using ad4 at ata2-master ar0: disk1 READY using ad6 at ata3-master ar0: disk2 READY using ad5 at ata2-slave ar0: disk3 READY using ad7 at ata3-slave SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ar0s2a --------------040409010908060104000808--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43117CE7.9040703>