Date: Wed, 16 Nov 2005 20:17:01 +1300 From: Mark Kirkwood <markir@paradise.net.nz> To: freebsd-smp@freebsd.org Subject: SMP kernel but no SMP detected on Tyan S2515 Message-ID: <437ADCED.2030906@paradise.net.nz>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------070706080400010808090800 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit This has me puzzled: I have a 2 cpu S2515 that has had SMP added to the kernel - however upon reboot the 2nd cpu is not detected (It is detected by the BIOS BTW). I see the following in the verbose dmesg: APIC: Could not find any APICs. I am guessing that it is turned off in the BIOS (???), if so, I've no idea where it is (AMIBIOS is my least favorite...). I have enclosed a verbose dmesg and my kernel differences from GENERIC plus the (non-existent) output from mptable. Any ideas appreciated. regards Mark --------------070706080400010808090800 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Wed Nov 16 19:09:19 NZDT 2005 root@ikker.markir.net:/usr/obj/usr/src/sys/STANDARD Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a42000. Calibrating clock(s) ... i8254 clock: 1192994 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 996845270 Hz CPU: Intel Pentium III (996.85-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000007dbc7fff, 2096758784 bytes (511904 pages) avail memory = 2096533504 (1999 MB) APIC: Could not find any APICs. bios32: Found BIOS32 Service Directory header at 0xc00fdb90 bios32: Entry = 0xfdba0 (c00fdba0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdbc1 pnpbios: Found PnP BIOS data at 0xc00f4320 pnpbios: Entry = f0000:2fa4 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> mem: <memory> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) pcibios: BIOS version 2.10 Found $PIR table, 10 entries at 0xc00f4b30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 15 A 0x01 10 embedded 0 4 A 0x14 3 4 5 7 9 10 11 12 14 15 embedded 0 5 A 0x15 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x16 3 4 5 7 9 10 11 12 14 15 embedded 0 3 A 0x1f 3 4 5 7 9 10 11 12 14 15 embedded 1 6 A 0x1d 3 4 5 7 9 10 11 12 14 15 embedded 1 6 B 0x1c 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 A 0x1b 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 B 0x1e 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 C 0x1d 3 4 5 7 9 10 11 12 14 15 slot 1 1 2 D 0x1c 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 A 0x17 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 B 0x18 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 C 0x19 3 4 5 7 9 10 11 12 14 15 slot 2 1 3 D 0x1a 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 A 0x1e 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 B 0x1d 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 C 0x1c 3 4 5 7 9 10 11 12 14 15 slot 3 1 4 D 0x1b 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 A 0x1d 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 B 0x1c 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 C 0x1b 3 4 5 7 9 10 11 12 14 15 slot 4 1 5 D 0x1e 3 4 5 7 9 10 11 12 14 15 pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 10 Entries> on motherboard $PIR: Links after initial probe: Link IRQ Rtd Ref IRQs 0x1 255 N 1 10 0x14 255 N 1 3 4 5 7 9 10 11 12 14 15 0x15 255 N 1 3 4 5 7 9 10 11 12 14 15 0x16 255 N 1 3 4 5 7 9 10 11 12 14 15 0x1f 255 N 1 3 4 5 7 9 10 11 12 14 15 0x1d 255 N 4 3 4 5 7 9 10 11 12 14 15 0x1c 255 N 4 3 4 5 7 9 10 11 12 14 15 0x1b 255 N 3 3 4 5 7 9 10 11 12 14 15 0x1e 255 N 3 3 4 5 7 9 10 11 12 14 15 0x17 255 N 1 3 4 5 7 9 10 11 12 14 15 0x18 255 N 1 3 4 5 7 9 10 11 12 14 15 0x19 255 N 1 3 4 5 7 9 10 11 12 14 15 0x1a 255 N 1 3 4 5 7 9 10 11 12 14 15 $PIR: Found matching pin for 0.15.INTA at func 2: 10 $PIR: Found matching pin for 0.4.INTA at func 0: 9 $PIR: Found matching pin for 0.5.INTA at func 0: 5 $PIR: Found matching pin for 0.1.INTA at func 0: 11 $PIR: Found matching pin for 1.2.INTA at func 0: 10 $PIR: Links after initial IRQ discovery: Link IRQ Rtd Ref IRQs 0x1 10 N 1 10 0x14 9 Y 1 3 4 5 7 9 10 11 12 14 15 0x15 5 Y 1 3 4 5 7 9 10 11 12 14 15 0x16 11 Y 1 3 4 5 7 9 10 11 12 14 15 0x1f 255 N 1 3 4 5 7 9 10 11 12 14 15 0x1d 255 N 4 3 4 5 7 9 10 11 12 14 15 0x1c 255 N 4 3 4 5 7 9 10 11 12 14 15 0x1b 10 Y 3 3 4 5 7 9 10 11 12 14 15 0x1e 255 N 3 3 4 5 7 9 10 11 12 14 15 0x17 255 N 1 3 4 5 7 9 10 11 12 14 15 0x18 255 N 1 3 4 5 7 9 10 11 12 14 15 0x19 255 N 1 3 4 5 7 9 10 11 12 14 15 0x1a 255 N 1 3 4 5 7 9 10 11 12 14 15 $PIR: IRQs used by BIOS: 5 9 10 11 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 1 0 0 0 1 4 1 0 0 0 0 ] pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=0, slot=1, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc000000, size 24, enabled map[14]: type 4, range 32, base 0000d800, size 8, enabled map[18]: type 1, range 32, base fdaff000, size 12, enabled $PIR: 0:1 INTA routed to irq 11 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fdafe000, size 12, enabled map[14]: type 4, range 32, base 0000d400, size 6, enabled map[18]: type 1, range 32, base fd900000, size 20, enabled $PIR: 0:4 INTA routed to irq 9 found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fdafd000, size 12, enabled map[14]: type 4, range 32, base 0000d000, size 6, enabled map[18]: type 1, range 32, base fd700000, size 20, enabled $PIR: 0:5 INTA routed to irq 5 found-> vendor=0x1166, dev=0x0200, revid=0x50 bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 00000580, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x1166, dev=0x0220, revid=0x04 bus=0, slot=15, func=2 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=10 map[10]: type 1, range 32, base fdafc000, size 12, enabled $PIR: 0:15 INTA routed to irq 10 pci0: <display, VGA> at device 1.0 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xd400-0xd43f mem 0xfdafe000-0xfdafefff,0xfd900000-0xfd9fffff irq 9 at device 4.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafe000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:e0:81:03:55:e2 fxp0: [MPSAFE] fxp1: <Intel 82559 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfdafd000-0xfdafdfff,0xfd700000-0xfd7fffff irq 5 at device 5.0 on pci0 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafd000 fxp1: using memory space register mapping fxp1: PCI IDs: 8086 1229 8086 000c 0008 fxp1: Dynamic Standby mode is disabled miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached fxp1: Ethernet address: 00:e0:81:03:55:e3 fxp1: [MPSAFE] isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=60 ostat1=70 ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20 ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30 ata0: reset tp2 stat0=20 stat1=30 devices=0x0 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x90 err=0x01 lsb=0x14 msb=0xeb ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] ohci0: <OHCI (generic) USB controller> mem 0xfdafc000-0xfdafcfff irq 10 at device 15.2 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdafc000 ohci0: (New OHCI DeviceId=0x02201166) ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 1 on motherboard pir: pir0 already exists; skipping it pci1: <PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x13c1, dev=0x1001, revid=0x01 bus=1, slot=2, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x011f, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x09 (2250 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 4, enabled map[18]: type 1, range 32, base fe000000, size 23, enabled $PIR: 1:2 INTA routed to irq 10 twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0xe800-0xe80f mem 0xfe000000-0xfe7fffff irq 10 at device 2.0 on pci1 twe0: Reserved 0x10 bytes for rid 0x10 type 4 at 0xe800 twe0: [GIANT-LOCKED] twe0: AEN: <soft reset> twe0: 4 ports, Firmware FE7X 1.05.00.068, BIOS BE7X 1.08.00.048 twe0: Monitor ME7X 1.01.00.040, PCB Rev4 , Achip 3.20 , Pchip 1.30-66 twe0: port 2: ST320011A 19092MB twe0: port 3: ST320011A 19092MB ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 13 devices, largest 234 bytes PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x7fffffff, size=0x7ff00000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfec01000-0xfec01fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 pnpbios: handle 4 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 6 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1 PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1 PNP0c02: adding io range 0xc00-0xc01, size=0x2, align=0x1 PNP0c02: adding io range 0xc14-0xc14, size=0x1, align=0x1 PNP0c02: adding io range 0xc49-0xc4a, size=0x2, align=0x1 PNP0c02: adding io range 0xc52-0xc52, size=0x1, align=0x1 PNP0c02: adding io range 0xc6c-0xc6c, size=0x1, align=0x1 PNP0c02: adding io range 0xc6f-0xc6f, size=0x1, align=0x1 PNP0c02: adding io range 0xcd6-0xcd7, size=0x2, align=0x1 PNP0c02: adding io range 0xf50-0xf58, size=0x9, align=0x1 PNP0c02: adding io range 0x374-0x375, size=0x2, align=0x1 PNP0c02: adding io range 0x377-0x377, size=0x1, align=0x1 PNP0c02: adding fixed memory32 range 0xc9000-0xc97ff, size=0x800 PNP0c02: adding fixed memory32 range 0xcb800-0xd7fff, size=0xc800 pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x580-0x58f, size=0x10, align=0x1 PNP0c02: adding io range 0x500-0x51f, size=0x20, align=0x1 pnpbios: handle 9 device ID PNP0c02 (020cd041) pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x10 pnpbios: handle 11 device ID PNP0501 (0105d041) PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8 PNP0501: adding irq mask 0x8 pnpbios: handle 12 device ID PNP0501 (0105d041) unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9800-0xca7ff,0xca800-0xcb7ff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c01> at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x100000-0x7fffffff,0xfec00000-0xfec00fff,0xfec01000-0xfec01fff,0xfee00000-0xfee00fff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> at port 0x580-0x58f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 Device configuration finished. Reducing kern.maxvnodes 134371 -> 100000 procfs registered Timecounter "TSC" frequency 996845270 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ServerWorks ROSB4 chip acd0: setting UDMA33 on ServerWorks ROSB4 chip acd0: <CREATIVE CD5233E-N/0.20> CDROM drive at ata1 as master acd0: 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc twed0: <Unit 2, RAID0, Normal> on twe0 twed0: 38183MB (78199808 sectors) ATA PseudoRAID loaded GEOM: new disk twed0 Trying to mount root from ufs:/dev/twed0s1a start_init: trying /sbin/init Loading configuration files. kernel dumps on /dev/twed0s1b Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/twed0s1b as swap device Starting file system checks: /dev/twed0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/twed0s1a: clean, 8070344 free (24976 frags, 1005671 blocks, 0.3% fragmentation) Setting hostname: ikker.markir.net. vfs.read_max: 8 -> 16 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet6 fe80::2e0:81ff:fe03:55e2%fxp0 prefixlen 64 tentative scopeid 0x1 inet 192.168.1.9 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:e0:81:03:55:e2 media: Ethernet autoselect (100baseTX <full-duplex>) status: active add net default: gateway 192.168.1.1 Additional routing options: . Starting devd. Mounting NFS file systems: . Creating and/or trimming log files: . Starting syslogd. Checking for core dump on /dev/twed0s1b... savecore: no dumps found ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting local daemons: . Updating motd . Configuring syscons: blanktime . Starting sshd. Initial i386 initialization: . Additional ABI support: . Starting cron. Local package initialization: . Additional TCP options: . Starting background file system checks in 60 seconds. Wed Nov 16 19:55:55 NZDT 2005 Nov 16 19:56:01 ikker login: ROOT LOGIN (root) ON ttyv0 --------------070706080400010808090800 Content-Type: text/plain; name="kernel.diff" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="kernel.diff" --- GENERIC Wed Nov 16 20:09:47 2005 +++ STANDARD Wed Nov 16 20:09:34 2005 @@ -1,11 +1,12 @@ # -# GENERIC -- Generic kernel configuration file for FreeBSD/i386 +# STANDARD -- Kernel configuration file for FreeBSD/i386 +# machine i386 -cpu I486_CPU -cpu I586_CPU +#cpu I486_CPU +#cpu I586_CPU cpu I686_CPU -ident GENERIC +ident STANDARD # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. @@ -45,6 +46,7 @@ options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. +options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC --------------070706080400010808090800 Content-Type: text/plain; name="mptable" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="mptable" # mptable -verbose -grope =============================================================================== MPTable looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00 searching CMOS 'top of mem' @ 0x0009f000 (636K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 searching extended BIOS @ 0x000e0000 groping memory @ 0x00080000 groping memory @ 0x00090000 MP FPS NOT found, suggest trying -grope option!!! --------------070706080400010808090800--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?437ADCED.2030906>