Date: Thu, 27 Apr 2006 19:06:44 +0900 From: Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> To: Tyler Gee <geekout@gmail.com>, Yuri Pankov <yuri.pankov@gmail.com> Cc: freebsd-amd64@freebsd.org Subject: Re: FreeBSD nfe driver for NVIDIA nForce network adapter Message-ID: <445097B4.1060400@se.hiroshima-u.ac.jp> In-Reply-To: <6e01203b0604270141q34ff3137xb027ed8ed9420843@mail.gmail.com> References: <44506B8B.4090605@se.hiroshima-u.ac.jp> <44507BAF.4070901@gmail.com> <6e01203b0604270141q34ff3137xb027ed8ed9420843@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for your reports. I have not tested the driver on FreeBSD 7.0-CURRENT and on the Cicada phys. I'll try it on these platforms. --- S. Tagashira Tyler Gee wrote: > Working like a charm (with the 88E1111 patch ) > > FreeBSD xxx 6.1-RC FreeBSD 6.1-RC #3: Wed Apr 26 21:50:14 HST 2006 > root@so uth:/usr/obj/usr/src/sys/DESKBOT amd64 > > MS-7207 Motherboard > > Thanks! > Tyler > > On 4/26/06, Yuri Pankov <yuri.pankov@gmail.com> wrote: >> Shigeaki Tagashira wrote: >>> I am providing a FreeBSD device driver of NVIDIA nForce network adapter. >>> It is a native device driver and is based on the OpenBSD nfe driver. >>> The latest driver was tested on FreeBSD 6.1-RC/amd64 and seems to work stably >>> on my machine (ASUS A8N-SLI Premium). >>> >>> It can be downloaded at the following URL. >>> http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html >>> >>> Best regards >>> --- >>> S. Tagashira >>> >> I've tried this driver on recent FreeBSD 7.0-CURRENT/amd64. Driver >> compiles, this is what I get after kldload if_nfe: >> >> nfe0: <NVIDIA nForce MCP9 Networking Adapter> port 0xe800-0xe807 mem >> 0xf5102000-0xf5102fff irq 23 at device 10.0 on pci0 >> nfe0: bpf attached >> nfe0: Ethernet address: 00:0f:ea:7d:f3:20 >> nfe0: [MPSAFE] >> pci1: driver added >> miibus0: <MII bus> on nfe0 >> ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0 >> ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-FDX, auto >> nfe0: link state changed to DOWN >> nfe0: gigabit link up >> nfe0: link state changed to UP >> >> ifconfig output: >> >> nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >> options=8<VLAN_MTU> >> inet 10.10.10.1 netmask 0xffffff00 broadcast 10.10.10.255 >> inet6 fe80::20f:eaff:fe7d:f320%nfe0 prefixlen 64 scopeid 0x3 >> ether 00:0f:ea:7d:f3:20 >> media: Ethernet autoselect (1000baseTX <full-duplex>) >> status: active >> >> Looks ok, but when I try to ping 10.10.10.2 it says 'host is down'. >> Though it works OK with if_nve driver. >> >> Anyway, thanks for your work! >> >> Yuri >> _______________________________________________ >> freebsd-amd64@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 >> To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?445097B4.1060400>