Date: Fri, 18 Mar 2005 18:27:35 +0100 From: Palle Girgensohn <girgen@pingpong.net> To: x11@freebsd.org Subject: no DVI output after upgrading to xorg 6.8.2 Message-ID: <44E0227E134FF92A7FAB68D2@fikon.pingpong.net>
next in thread | raw e-mail | index | archive | help
--==========7E278A35CE8FFE7ABCA2========== Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi! After upgrading xorg to 6.8.2, my Radeon 9600 SE refuses to send any output on the DVI connector. Not even in BIOS during boot. VGA works fine. Before upgrading it worked just fine. Here's what Xorg.0.log says about it: (II) RADEON(0): Primary: Monitor -- CRT Connector -- VGA DAC Type -- Primary TMDS Type -- NONE DDC Type -- VGA_DDC (II) RADEON(0): Secondary: Monitor -- NONE Connector -- DVI-I DAC Type -- TVDAC/ExtDAC TMDS Type -- Internal DDC Type -- DVI_DDC (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=19900 (WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled I've shut down the system and tried all sorts of things. I went back to 6.8.1, but that didn't help (why should it, even in BIOS I don't get a signal). Is the card broken, or is it some "burnt in" config that happened? In the latter case, how can I fix it? I've enclosed the xorg log and config. System is FreeBSD 5-stable, Xorg 6.8.2. Regards, Palle --==========7E278A35CE8FFE7ABCA2==========--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44E0227E134FF92A7FAB68D2>