Date: Thu, 19 Oct 2006 17:55:03 +0200 From: Philipp Wuensche <cryx-freebsd@h3q.com> To: Ken Gunderson <kgunders@teamcool.net> Cc: freebsd-amd64@freebsd.org Subject: Re: tyan am2 boards Message-ID: <45379FD7.2060604@h3q.com> In-Reply-To: <20061011235311.e687ca06.kgunders@teamcool.net> References: <20061011235311.e687ca06.kgunders@teamcool.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Ken Gunderson wrote: > Greetings All: > > Perchance does anyone have any experience with either of these > Tyan AM2 boards they could share?? > > Tomcat n3400B (S2925) - nVidia nForce Pro 3400 based > <http://www.tyan.com/products/html/tomcatn3400b_spec.html>; > > > Tomcat h1000S (S3950) - Broadcom ht1000 based > <http://www.tyan.com/products/html/tomcath1000s.html>; I have this board since yesterday. With SATA in P-ATA emulation it boots and I'm able to install 6.1-RELAESE on the both SATA disks (ad6, ad10) with gmirror. Whats not working is any kind of temperature or fan-speed monitoring, I just don't get the hw.acpi.thermal stuff and building the kernel with smb and intpm support does not give the /dev/smb device. Also this amr_linux failure looks odd, but I get that on other Tyan boards too. I don't use the onboard raid-stuff, so I can't say anything about that. Don't wonder about the UDMA33 message of the harddisks, they both work in full speed. Got 50MByte/s sustained while syncing the gmirror. If you have any tests or questions, the system will not be in production until end of next week or so, so I can play if you have any specific questions :-) dmesg: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE-p10 #0: Thu Oct 19 15:16:05 CEST 2006 root@server1:/usr/obj/usr/src/sys/SMP-FOO ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> Cores per package: 2 real memory = 2147418112 (2047 MB) avail memory = 2062290944 (1966 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard kbd0 at kbdmux0 acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pci2: <ACPI PCI bus> on pcib2 atapci0: <GENERIC ATA controller> port 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f mem 0xff3fe000-0xff3fffff irq 11 at device 14.0 on pci1 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 atapci1: <GENERIC ATA controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f irq 11 at device 14.1 on pci1 ata4: <ATA channel 0> on atapci1 ata5: <ATA channel 1> on atapci1 atapci2: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xe000-0xe0ff mem 0xff6b4000-0xff6b4fff irq 10 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0xe400-0xe4ff mem 0xff6b5000-0xff6b5fff irq 10 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0xe800-0xe8ff mem 0xff6b6000-0xff6b6fff irq 10 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xdc00-0xdc3f mem 0xff680000-0xff69ffff,0xff660000-0xff67ffff irq 24 at device 4.0 on pci0 em0: Ethernet address: 00:e0:81:5e:bd:f4 em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xd880-0xd8bf mem 0xff620000-0xff63ffff,0xff600000-0xff61ffff irq 25 at device 5.0 on pci0 em1: Ethernet address: 00:e0:81:5e:bd:f5 pci0: <display, VGA> at device 6.0 (no driver attached) acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062e300, 0) error 6 ad4: 238475MB <Seagate ST3250820NS 3.AEE> at ata2-master UDMA33 GEOM_MIRROR: Device gm0 created (id=4289931757). GEOM_MIRROR: Device gm0: provider ad4 detected. ad6: 238475MB <Seagate ST3250820NS 3.AEE> at ata3-master UDMA33 SMP: AP CPU #1 Launched! GEOM_MIRROR: Device gm0: provider ad6 detected. GEOM_MIRROR: Device gm0: provider ad6 activated. GEOM_MIRROR: Device gm0: provider ad4 activated. GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. Trying to mount root from ufs:/dev/mirror/gm0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45379FD7.2060604>