Date: Thu, 19 Oct 2006 21:16:18 +0200 From: "O. Hartmann" <ohartman@mail.zedat.fu-berlin.de> To: Philipp Wuensche <cryx-freebsd@h3q.com> Cc: freebsd-amd64@freebsd.org Subject: Re: tyan am2 boards Message-ID: <4537CF02.60205@mail.zedat.fu-berlin.de> In-Reply-To: <45379FD7.2060604@h3q.com> References: <20061011235311.e687ca06.kgunders@teamcool.net> <45379FD7.2060604@h3q.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Philipp Wuensche wrote: > Ken Gunderson wrote: > >> Greetings All: >> >> Perchance does anyone have any experience with either of these >> Tyan AM2 boards they could share?? >> >> Tomcat n3400B (S2925) - nVidia nForce Pro 3400 based >> <http://www.tyan.com/products/html/tomcatn3400b_spec.html>; >> >> >> Tomcat h1000S (S3950) - Broadcom ht1000 based >> <http://www.tyan.com/products/html/tomcath1000s.html>; >> > > I have this board since yesterday. With SATA in P-ATA emulation it boots > and I'm able to install 6.1-RELAESE on the both SATA disks (ad6, ad10) > with gmirror. > > Whats not working is any kind of temperature or fan-speed monitoring, I > just don't get the hw.acpi.thermal stuff and building the kernel with > smb and intpm support does not give the /dev/smb device. > The same on older nForce4X16 based boards like the A8N32-SLI from ASUS and the same on ASUS P4P800 Board, an older i845 based P4 board. It seems to me that every ACPI APIC Table: <A M I OEMAPIC > marked mainboard I have access to does not show up any kind of fan speed/temperature stuff. I know, that OpenBSD on the same motherboards do! > Also this amr_linux failure looks odd, but I get that on other Tyan > boards too. > > I don't use the onboard raid-stuff, so I can't say anything about that. > > Don't wonder about the UDMA33 message of the harddisks, they both work > in full speed. Got 50MByte/s sustained while syncing the gmirror. > > If you have any tests or questions, the system will not be in production > until end of next week or so, so I can play if you have any specific > questions :-) > > dmesg: > > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.1-RELEASE-p10 #0: Thu Oct 19 15:16:05 CEST 2006 > root@server1:/usr/obj/usr/src/sys/SMP-FOO > ACPI APIC Table: <A M I OEMAPIC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz > K8-class CPU) > Origin = "AuthenticAMD" Id = 0x40fb2 Stepping = 2 > > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=0x2001<SSE3,CX16> > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> > AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8> > Cores per package: 2 > real memory = 2147418112 (2047 MB) > avail memory = 2062290944 (1966 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 1.1> irqs 0-15 on motherboard > ioapic1 <Version 1.1> irqs 16-31 on motherboard > ioapic2 <Version 1.1> irqs 32-47 on motherboard > kbd0 at kbdmux0 > acpi0: <A M I OEMXSDT> on motherboard > acpi0: Power Button (fixed) > acpi0: Sleep Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > atapci0: <GENERIC ATA controller> port > 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f > mem 0xff3fe000-0xff3fffff irq 11 at device 14.0 on pci1 > ata2: <ATA channel 0> on atapci0 > ata3: <ATA channel 1> on atapci0 > atapci1: <GENERIC ATA controller> port > 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f > irq 11 at device 14.1 on pci1 > ata4: <ATA channel 0> on atapci1 > ata5: <ATA channel 1> on atapci1 > atapci2: <GENERIC ATA controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 > ata0: <ATA channel 0> on atapci2 > ata1: <ATA channel 1> on atapci2 > isab0: <PCI-ISA bridge> at device 2.2 on pci0 > isa0: <ISA bus> on isab0 > ohci0: <OHCI (generic) USB controller> port 0xe000-0xe0ff mem > 0xff6b4000-0xff6b4fff irq 10 at device 3.0 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ohci1: <OHCI (generic) USB controller> port 0xe400-0xe4ff mem > 0xff6b5000-0xff6b5fff irq 10 at device 3.1 on pci0 > ohci1: [GIANT-LOCKED] > usb1: OHCI version 1.0, legacy support > usb1: SMM does not respond, resetting > usb1: <OHCI (generic) USB controller> on ohci1 > usb1: USB revision 1.0 > uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> port 0xe800-0xe8ff mem > 0xff6b6000-0xff6b6fff irq 10 at device 3.2 on pci0 > ehci0: [GIANT-LOCKED] > usb2: EHCI version 1.0 > usb2: companion controllers, 2 ports each: usb0 usb1 > usb2: <EHCI (generic) USB 2.0 controller> on ehci0 > usb2: USB revision 2.0 > uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub2: 4 ports with 4 removable, self powered > em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0xdc00-0xdc3f mem 0xff680000-0xff69ffff,0xff660000-0xff67ffff irq 24 at > device 4.0 on pci0 > em0: Ethernet address: 00:e0:81:5e:bd:f4 > em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0xd880-0xd8bf mem 0xff620000-0xff63ffff,0xff600000-0xff61ffff irq 25 at > device 5.0 on pci0 > em1: Ethernet address: 00:e0:81:5e:bd:f5 > pci0: <display, VGA> at device 6.0 (no driver attached) > acpi_button0: <Power Button> on acpi0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A, console > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062e300, 0) error 6 > ad4: 238475MB <Seagate ST3250820NS 3.AEE> at ata2-master UDMA33 > GEOM_MIRROR: Device gm0 created (id=4289931757). > GEOM_MIRROR: Device gm0: provider ad4 detected. > ad6: 238475MB <Seagate ST3250820NS 3.AEE> at ata3-master UDMA33 > SMP: AP CPU #1 Launched! > GEOM_MIRROR: Device gm0: provider ad6 detected. > GEOM_MIRROR: Device gm0: provider ad6 activated. > GEOM_MIRROR: Device gm0: provider ad4 activated. > GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. > Trying to mount root from ufs:/dev/mirror/gm0s1a > > > _______________________________________________ > freebsd-amd64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 > To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org" > -- O. Hartmann Freie Universitaet Berlin Institut fuer Geowissenschaften Fernerkundung der Erde und Planeten Malteser-Str. 74 - 100/Haus D D-12249 Berlin Tel.: +49 (0) 30 838 70 508 FAX: +49 (0) 30 838 70 837
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4537CF02.60205>