Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 02 Nov 2006 09:35:19 -0700
From:      Scott Long <scottl@samsco.org>
To:        John Polstra <jdp@polstra.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Silly IRQ allocation on Dell 1950
Message-ID:  <454A1E47.9060200@samsco.org>
In-Reply-To: <XFMail.20061102080327.jdp@polstra.com>
References:  <XFMail.20061102080327.jdp@polstra.com>

next in thread | previous in thread | raw e-mail | index | archive | help
This is typical Dell, and it gets even worse if you have a laptop.
Imagine every PCI device being on the sole interrupt line that is routed
on the motherboard.  Growing MSI support would get around this for bce
and many other devices.

Scott


John Polstra wrote:
> I've been testing a Dell 1950 box with -current from late July.  The
> box has two integrated BCM5708 gigabit ethernet interfaces that work
> with the bce driver.  I noticed that both bce0 and bce1 are assigned
> to IRQ 16.  With two IOAPICs on board, it's hard to believe that Dell
> would be so silly as to force the two gigabit interfaces to share an
> IRQ.  Is this sharing really necessary, or is it caused by a bug or
> limitation in the OS?  The verbose dmesg output follows below.
> 
> Thanks,
> John
> 
> KDB: current backend: ddb
> SMAP type=01 base=0000000000000000 len=00000000000a0000
> SMAP type=01 base=0000000000100000 len=000000007fea8000
> SMAP type=03 base=000000007ffa8000 len=000000000000fc00
> SMAP type=02 base=000000007ffb7c00 len=0000000000048400
> SMAP type=02 base=00000000e0000000 len=0000000010000000
> SMAP type=02 base=00000000fe000000 len=0000000002000000
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 7.0-CURRENT #11: Wed Nov  1 16:43:44 PST 2006
>     jdp@f1.polstra.com:/usr/home/jdp/f5/robotcd/robotcd/src/sys/i386/compile/ROBOTCD
> Using 64 colors for the VM-PQ tuning (4096, 16)
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc08aa000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08aa14c.
> MP Configuration Table version 1.4 found at 0xc00f0000
> Table 'FACP' at 0xf2b88
> Table 'APIC' at 0xf2c7c
> MADT: Found table at 0xf2c7c
> APIC: Using the MADT enumerator.
> MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
> SMP: Added CPU 0 (AP)
> MADT: Found CPU APIC ID 6 ACPI ID 2: enabled
> SMP: Added CPU 6 (AP)
> MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
> SMP: Added CPU 1 (AP)
> MADT: Found CPU APIC ID 7 ACPI ID 4: enabled
> SMP: Added CPU 7 (AP)
> MADT: Found CPU APIC ID 20 ACPI ID 5: disabled
> MADT: Found CPU APIC ID 21 ACPI ID 6: disabled
> MADT: Found CPU APIC ID 22 ACPI ID 7: disabled
> MADT: Found CPU APIC ID 23 ACPI ID 8: disabled
> INTR: Adding local APIC 0 as a target
> ACPI APIC Table: <DELL   PE_SC3  >
> Calibrating clock(s) ... i8254 clock: 1191852 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 2995804296 Hz
> CPU: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz (2995.80-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
>  
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,
> DTS,ACPI,MMX,FXSR,SSE,SSE
> 2,SS,HTT,TM,PBE>
>   Features2=0x4e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>,<b18>>
>   AMD Features=0x20100000<NX,LM>
>   AMD Features2=0x1<LAHF>
>   Cores per package: 2
> 
> Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
> 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
> 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
> L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
> real memory  = 2147123200 (2047 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c28000 - 0x000000007db60fff, 2096336896 bytes (511801 pages)
> avail memory = 2096107520 (1999 MB)
> INTR: Adding local APIC 1 as a target
> INTR: Adding local APIC 6 as a target
> INTR: Adding local APIC 7 as a target
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>  cpu2 (AP): APIC ID:  6
>  cpu3 (AP): APIC ID:  7
> bios32: Found BIOS32 Service Directory header at 0xc00ffe80
> bios32: Entry = 0xffe90 (c00ffe90)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xb46e
> pnpbios: Found PnP BIOS data at 0xc00fe2d0
> pnpbios: Entry = f0000:e2f4  Rev = 1.0
> Other BIOS signatures found:
> APIC: CPU 0 has ACPI ID 1
> APIC: CPU 1 has ACPI ID 3
> APIC: CPU 2 has ACPI ID 2
> APIC: CPU 3 has ACPI ID 4
> MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
> ioapic0: Changing APIC ID to 8
> ioapic0: Routing external 8259A's -> intpin 0
> ioapic0: intpin 0 -> ExtINT (edge, high)
> ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
> ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
> ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
> ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
> ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
> ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
> ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
> ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
> ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
> ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
> ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
> ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
> ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
> ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
> ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
> ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
> ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
> ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
> ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
> ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
> ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
> ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
> ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
> MADT: Found IO APIC ID 9, Interrupt 64 at 0xfec81000
> ioapic1: Changing APIC ID to 9
> ioapic1: WARNING: intbase 64 != expected base 24
> ioapic1: intpin 0 -> PCI IRQ 64 (level, low)
> ioapic1: intpin 1 -> PCI IRQ 65 (level, low)
> ioapic1: intpin 2 -> PCI IRQ 66 (level, low)
> ioapic1: intpin 3 -> PCI IRQ 67 (level, low)
> ioapic1: intpin 4 -> PCI IRQ 68 (level, low)
> ioapic1: intpin 5 -> PCI IRQ 69 (level, low)
> ioapic1: intpin 6 -> PCI IRQ 70 (level, low)
> ioapic1: intpin 7 -> PCI IRQ 71 (level, low)
> ioapic1: intpin 8 -> PCI IRQ 72 (level, low)
> ioapic1: intpin 9 -> PCI IRQ 73 (level, low)
> ioapic1: intpin 10 -> PCI IRQ 74 (level, low)
> ioapic1: intpin 11 -> PCI IRQ 75 (level, low)
> ioapic1: intpin 12 -> PCI IRQ 76 (level, low)
> ioapic1: intpin 13 -> PCI IRQ 77 (level, low)
> ioapic1: intpin 14 -> PCI IRQ 78 (level, low)
> ioapic1: intpin 15 -> PCI IRQ 79 (level, low)
> ioapic1: intpin 16 -> PCI IRQ 80 (level, low)
> ioapic1: intpin 17 -> PCI IRQ 81 (level, low)
> ioapic1: intpin 18 -> PCI IRQ 82 (level, low)
> ioapic1: intpin 19 -> PCI IRQ 83 (level, low)
> ioapic1: intpin 20 -> PCI IRQ 84 (level, low)
> ioapic1: intpin 21 -> PCI IRQ 85 (level, low)
> ioapic1: intpin 22 -> PCI IRQ 86 (level, low)
> ioapic1: intpin 23 -> PCI IRQ 87 (level, low)
> lapic0: Routing NMI -> LINT1
> lapic0: LINT1 trigger: edge
> lapic0: LINT1 polarity: high
> lapic6: Routing NMI -> LINT1
> lapic6: LINT1 trigger: edge
> lapic6: LINT1 polarity: high
> lapic1: Routing NMI -> LINT1
> lapic1: LINT1 trigger: edge
> lapic1: LINT1 polarity: high
> lapic7: Routing NMI -> LINT1
> lapic7: LINT1 trigger: edge
> lapic7: LINT1 polarity: high
> MADT: Ignoring local NMI routed to ACPI CPU 5
> MADT: Ignoring local NMI routed to ACPI CPU 6
> MADT: Ignoring local NMI routed to ACPI CPU 7
> MADT: Ignoring local NMI routed to ACPI CPU 8
> MADT: Interrupt override: source 0, irq 2
> ioapic0: Routing IRQ 0 -> intpin 2
> ioapic0: intpin 2 trigger: edge
> ioapic0: intpin 2 polarity: high
> MADT: Interrupt override: source 9, irq 9
> ioapic0: intpin 9 trigger: level
> ioapic0: intpin 9 polarity: high
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 64-87 on motherboard
> cpu0 BSP:
>      ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>   timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
> mem: <memory>
> Pentium Pro MTRR support enabled
> io: <I/O>
> null: <null device, zero device>
> nfslock: pseudo-device
> npx0: INT 16 interface
> acpi0: <DELL PE_SC3> on motherboard
> ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
> acpi0: [MPSAFE]
> pci_open(1):    mode 1 addr port (0x0cf8) is 0x80040080
> pci_open(1a):   mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:   device 0 [class=060000] [hdr=00] is there (id=25c08086)
> pcibios: BIOS version 2.10
> Found $PIR table, 21 entries at 0xc00fade0
> PCI-Only Interrupts: none
> Location  Bus Device Pin  Link  IRQs
> embedded    0    0    A   0x60  3 4 5 6 10 11 14 15
> embedded    0    2    A   0x60  3 4 5 6 10 11 14 15
> embedded    0    3    A   0x60  3 4 5 6 10 11 14 15
> embedded    0    4    A   0x60  3 4 5 6 10 11 14 15
> embedded    0    5    A   0x60  3 4 5 6 10 11 14 15
> embedded    0    6    A   0x60  3 4 5 6 10 11 14 15
> embedded    0    7    A   0x60  3 4 5 6 10 11 14 15
> embedded    0   28    A   0x60  3 4 5 6 10 11 14 15
> embedded    0   28    B   0x61  3 4 5 6 10 11 14 15
> embedded    0   28    C   0x62  3 4 5 6 10 11 14 15
> embedded    0   28    D   0x63  3 4 5 6 10 11 14 15
> embedded    0   29    A   0x69  3 4 5 6 10 11 14 15
> embedded    0   29    B   0x68  3 4 5 6 10 11 14 15
> embedded    0   29    C   0x69  3 4 5 6 10 11 14 15
> embedded    0   29    D   0x68  3 4 5 6 10 11 14 15
> embedded    0   31    A   0x60  3 4 5 6 10 11 14 15
> embedded    0   31    B   0x61  3 4 5 6 10 11 14 15
> embedded    0   31    C   0x6b  3 4 5 6 10 11 14 15
> embedded    5    0    A   0x60  3 4 5 6 10 11 14 15
> embedded    5    0    B   0x61  3 4 5 6 10 11 14 15
> embedded    5    0    C   0x62  3 4 5 6 10 11 14 15
> embedded    5    0    D   0x63  3 4 5 6 10 11 14 15
> embedded    6    0    A   0x60  3 4 5 6 10 11 14 15
> embedded    6    1    A   0x60  3 4 5 6 10 11 14 15
> embedded    8    0    A   0x60  3 4 5 6 10 11 14 15
> embedded    8    0    B   0x61  3 4 5 6 10 11 14 15
> embedded    8    0    C   0x62  3 4 5 6 10 11 14 15
> embedded    8    0    D   0x63  3 4 5 6 10 11 14 15
> embedded    1    0    A   0x60  3 4 5 6 10 11 14 15
> embedded    1    0    B   0x61  3 4 5 6 10 11 14 15
> embedded    1    0    C   0x62  3 4 5 6 10 11 14 15
> embedded    1    0    D   0x63  3 4 5 6 10 11 14 15
> embedded    2    8    A   0x60  3 4 5 6 10 11 14 15
> embedded    2    8    B   0x61  3 4 5 6 10 11 14 15
> embedded    2   14    A   0x62  3 4 5 6 10 11 14 15
> slot 1     11    0    A   0x60  3 4 5 6 10 11 14 15
> slot 1     11    0    B   0x61  3 4 5 6 10 11 14 15
> slot 1     11    0    C   0x62  3 4 5 6 10 11 14 15
> slot 1     11    0    D   0x63  3 4 5 6 10 11 14 15
> slot 2     13    0    A   0x60  3 4 5 6 10 11 14 15
> slot 2     13    0    B   0x61  3 4 5 6 10 11 14 15
> slot 2     13    0    C   0x62  3 4 5 6 10 11 14 15
> slot 2     13    0    D   0x63  3 4 5 6 10 11 14 15
> embedded    4    0    A   0x60  3 4 5 6 10 11 14 15
> embedded    4    0    B   0x61  3 4 5 6 10 11 14 15
> embedded    4    0    C   0x62  3 4 5 6 10 11 14 15
> embedded    4    0    D   0x63  3 4 5 6 10 11 14 15
> embedded   15   13    A   0x63  3 4 5 6 10 11 14 15
> AcpiOsDerivePciId: bus 0 dev 31 func 0
> acpi0: Power Button (fixed)
> acpi0: wakeup code va 0xd88c9000 pa 0x9e000
> AcpiOsDerivePciId: bus 0 dev 16 func 1
> AcpiOsDerivePciId: bus 0 dev 16 func 0
> ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> pci_link0: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0    6   N     0  3 4 5 6 7 10 11 12
> pci_link0: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0    6   N     0  3 4 5 6 7 10 11 12
> pci_link0: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link1: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link1: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link1: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link2: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link2: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link2: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link3: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0    5   N     0  3 4 5 6 7 10 11 12
> pci_link3: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0    5   N     0  3 4 5 6 7 10 11 12
> pci_link3: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link4: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0   10   N     0  3 4 5 6 7 10 11 12
> pci_link4: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0   10   N     0  3 4 5 6 7 10 11 12
> pci_link4: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link5: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0   11   N     0  3 4 5 6 7 10 11 12
> pci_link5: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0   11   N     0  3 4 5 6 7 10 11 12
> pci_link5: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link6: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link6: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link6: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link7: Links after initial probe:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link7: Links after initial validation:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> pci_link7: Links after disable:
> Index  IRQ  Rtd  Ref  IRQs
>     0  255   N     0  3 4 5 6 7 10 11 12
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x8086, dev=0x25c0, revid=0x12
>         bus=0, slot=0, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
>         powerspec 2  supports D0 D3  current D0
>         MSI supports 2 messages
> found-> vendor=0x8086, dev=0x25e2, revid=0x12
>         bus=0, slot=2, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> found-> vendor=0x8086, dev=0x25e3, revid=0x12
>         bus=0, slot=3, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> found-> vendor=0x8086, dev=0x25f8, revid=0x12
>         bus=0, slot=4, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> found-> vendor=0x8086, dev=0x25e5, revid=0x12
>         bus=0, slot=5, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f9, revid=0x12
>         bus=0, slot=6, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> found-> vendor=0x8086, dev=0x25e7, revid=0x12
>         bus=0, slot=7, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f0, revid=0x12
>         bus=0, slot=16, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f0, revid=0x12
>         bus=0, slot=16, func=1
>         class=06-00-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f0, revid=0x12
>         bus=0, slot=16, func=2
>         class=06-00-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f1, revid=0x12
>         bus=0, slot=17, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f3, revid=0x12
>         bus=0, slot=19, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f5, revid=0x12
>         bus=0, slot=21, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x25f6, revid=0x12
>         bus=0, slot=22, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2690, revid=0x09
>         bus=0, slot=28, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=1
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> found-> vendor=0x8086, dev=0x2688, revid=0x09
>         bus=0, slot=29, func=0
>         class=0c-03-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         map[20]: type 4, range 32, base 0000cce0, size  5, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 21
> found-> vendor=0x8086, dev=0x2689, revid=0x09
>         bus=0, slot=29, func=1
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=10
>         map[20]: type 4, range 32, base 0000ccc0, size  5, enabled
> pcib0: matched entry for 0.29.INTB
> pcib0: slot 29 INTB hardwired to IRQ 20
> found-> vendor=0x8086, dev=0x268a, revid=0x09
>         bus=0, slot=29, func=2
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=c, irq=11
>         map[20]: type 4, range 32, base 0000cca0, size  5, enabled
> pcib0: matched entry for 0.29.INTC
> pcib0: slot 29 INTC hardwired to IRQ 21
> found-> vendor=0x8086, dev=0x268c, revid=0x09
>         bus=0, slot=29, func=7
>         class=0c-03-20, hdrtype=0x00, mfdev=0
>         cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D0 D3  current D0
>         map[10]: type 1, range 32, base fc600000, size 10, enabled
> pcib0: matched entry for 0.29.INTA
> pcib0: slot 29 INTA hardwired to IRQ 21
> found-> vendor=0x8086, dev=0x244e, revid=0xd9
>         bus=0, slot=30, func=0
>         class=06-04-01, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x2670, revid=0x09
>         bus=0, slot=31, func=0
>         class=06-01-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x8086, dev=0x269e, revid=0x09
>         bus=0, slot=31, func=1
>         class=01-01-8a, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
>         map[20]: type 4, range 32, base 0000fc00, size  4, enabled
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pcib1:   secondary bus     5
> pcib1:   subordinate bus   10
> pcib1:   I/O decode        0xf000-0xfff
> pcib1:   memory decode     0xf2000000-0xf7ffffff
> pcib1:   prefetched decode 0xfff00000-0xfffff
> pci5: <ACPI PCI bus> on pcib1
> pci5: physical bus=5
> found-> vendor=0x8086, dev=0x3500, revid=0x01
>         bus=5, slot=0, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=1
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> found-> vendor=0x8086, dev=0x350c, revid=0x01
>         bus=5, slot=0, func=3
>         class=06-04-00, hdrtype=0x01, mfdev=1
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pcib2:   secondary bus     6
> pcib2:   subordinate bus   9
> pcib2:   I/O decode        0xf000-0xfff
> pcib2:   memory decode     0xf4000000-0xf7ffffff
> pcib2:   prefetched decode 0xfff00000-0xfffff
> pci6: <ACPI PCI bus> on pcib2
> pci6: physical bus=6
> found-> vendor=0x8086, dev=0x3510, revid=0x01
>         bus=6, slot=0, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> found-> vendor=0x8086, dev=0x3514, revid=0x01
>         bus=6, slot=1, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci6
> pcib3:   secondary bus     7
> pcib3:   subordinate bus   8
> pcib3:   I/O decode        0xf000-0xfff
> pcib3:   memory decode     0xf4000000-0xf7ffffff
> pcib3:   prefetched decode 0xfff00000-0xfffff
> pci7: <ACPI PCI bus> on pcib3
> pci7: physical bus=7
> found-> vendor=0x1166, dev=0x0103, revid=0xc2
>         bus=7, slot=0, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
> pcib4: <PCI-PCI bridge> at device 0.0 on pci7
> pcib4:   secondary bus     8
> pcib4:   subordinate bus   8
> pcib4:   I/O decode        0xf000-0xfff
> pcib4:   memory decode     0xf4000000-0xf7ffffff
> pcib4:   prefetched decode 0xfff00000-0xfffff
> pci8: <PCI bus> on pcib4
> pci8: physical bus=8
> found-> vendor=0x14e4, dev=0x164c, revid=0x11
>         bus=8, slot=0, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=6
>         powerspec 2  supports D0 D3  current D0
>         MSI supports 1 message, 64 bit
>         map[10]: type 1, range 64, base f4000000, size 25, enabled
> pcib4: (null) requested memory range 0xf4000000-0xf5ffffff: good
> pcib3: (null) requested memory range 0xf4000000-0xf5ffffff: good
> pcib2: (null) requested memory range 0xf4000000-0xf5ffffff: good
> pcib1: (null) requested memory range 0xf4000000-0xf5ffffff: good
> pcib3: matched entry for 7.0.INTA
> pcib3: slot 0 INTA hardwired to IRQ 16
> pcib4: slot 0 INTA is routed to irq 16
> bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf4000000-0xf5ffffff irq 16 at
> device 0.0 on pci8
> bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
> bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
> miibus0: <MII bus> on bce0
> brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> bce0: bpf attached
> bce0: Ethernet address: 00:15:c5:e6:b6:ab
> ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
> bce0: [MPSAFE]
> pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci6
> pcib5:   secondary bus     9
> pcib5:   subordinate bus   9
> pcib5:   I/O decode        0xf000-0xfff
> pcib5:   memory decode     0xfff00000-0xfffff
> pcib5:   prefetched decode 0xfff00000-0xfffff
> pci9: <ACPI PCI bus> on pcib5
> pci9: physical bus=9
> pcib6: <PCI-PCI bridge> at device 0.3 on pci5
> pcib6:   secondary bus     10
> pcib6:   subordinate bus   10
> pcib6:   I/O decode        0xf000-0xfff
> pcib6:   memory decode     0xfff00000-0xfffff
> pcib6:   prefetched decode 0xfff00000-0xfffff
> pci10: <PCI bus> on pcib6
> pci10: physical bus=10
> pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pcib7:   secondary bus     1
> pcib7:   subordinate bus   2
> pcib7:   I/O decode        0xe000-0xefff
> pcib7:   memory decode     0xfc300000-0xfc5fffff
> pcib7:   prefetched decode 0xfff00000-0xfffff
> pci1: <ACPI PCI bus> on pcib7
> pci1: physical bus=1
> found-> vendor=0x8086, dev=0x032c, revid=0x09
>         bus=1, slot=0, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=1
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
> pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pcib8:   secondary bus     2
> pcib8:   subordinate bus   2
> pcib8:   I/O decode        0xe000-0xefff
> pcib8:   memory decode     0xfc400000-0xfc5fffff
> pcib8:   prefetched decode 0xfff00000-0xfffff
> pci2: <ACPI PCI bus> on pcib8
> pci2: physical bus=2
> found-> vendor=0x1000, dev=0x0054, revid=0x01
>         bus=2, slot=8, func=0
>         class=01-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
>         lattimer=0x48 (2160 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
>         intpin=a, irq=6
>         powerspec 2  supports D0 D1 D2 D3  current D0
>         MSI supports 1 message, 64 bit
>         map[10]: type 4, range 32, base 0000ec00, size  8, enabled
> pcib8: (null) requested I/O range 0xec00-0xecff: in range
> pcib7: (null) requested I/O range 0xec00-0xecff: in range
>         map[14]: type 1, range 64, base fc4fc000, size 14, enabled
> pcib8: (null) requested memory range 0xfc4fc000-0xfc4fffff: good
> pcib7: (null) requested memory range 0xfc4fc000-0xfc4fffff: good
>         map[1c]: type 1, range 64, base fc4e0000, size 16, enabled
> pcib8: (null) requested memory range 0xfc4e0000-0xfc4effff: good
> pcib7: (null) requested memory range 0xfc4e0000-0xfc4effff: good
> pcib8: matched entry for 2.8.INTA
> pcib8: slot 8 INTA hardwired to IRQ 64
> pci2: <mass storage, SCSI> at device 8.0 (no driver attached)
> pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pcib9:   secondary bus     11
> pcib9:   subordinate bus   11
> pcib9:   I/O decode        0xf000-0xfff
> pcib9:   memory decode     0xfff00000-0xfffff
> pcib9:   prefetched decode 0xfff00000-0xfffff
> pci11: <ACPI PCI bus> on pcib9
> pci11: physical bus=11
> pcib10: <PCI-PCI bridge> at device 5.0 on pci0
> pcib10:   secondary bus     12
> pcib10:   subordinate bus   12
> pcib10:   I/O decode        0xf000-0xfff
> pcib10:   memory decode     0xfff00000-0xfffff
> pcib10:   prefetched decode 0xfff00000-0xfffff
> pci12: <PCI bus> on pcib10
> pci12: physical bus=12
> pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pcib11:   secondary bus     13
> pcib11:   subordinate bus   13
> pcib11:   I/O decode        0xf000-0xfff
> pcib11:   memory decode     0xfff00000-0xfffff
> pcib11:   prefetched decode 0xfff00000-0xfffff
> pci13: <ACPI PCI bus> on pcib11
> pci13: physical bus=13
> pcib12: <PCI-PCI bridge> at device 7.0 on pci0
> pcib12:   secondary bus     14
> pcib12:   subordinate bus   14
> pcib12:   I/O decode        0xf000-0xfff
> pcib12:   memory decode     0xfff00000-0xfffff
> pcib12:   prefetched decode 0xfff00000-0xfffff
> pci14: <PCI bus> on pcib12
> pci14: physical bus=14
> pcib13: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pcib13:   secondary bus     3
> pcib13:   subordinate bus   4
> pcib13:   I/O decode        0xf000-0xfff
> pcib13:   memory decode     0xf8000000-0xfbffffff
> pcib13:   prefetched decode 0xfff00000-0xfffff
> pci3: <ACPI PCI bus> on pcib13
> pci3: physical bus=3
> found-> vendor=0x1166, dev=0x0103, revid=0xc2
>         bus=3, slot=0, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
> pcib14: <PCI-PCI bridge> at device 0.0 on pci3
> pcib14:   secondary bus     4
> pcib14:   subordinate bus   4
> pcib14:   I/O decode        0xf000-0xfff
> pcib14:   memory decode     0xf8000000-0xfbffffff
> pcib14:   prefetched decode 0xfff00000-0xfffff
> pci4: <PCI bus> on pcib14
> pci4: physical bus=4
> found-> vendor=0x14e4, dev=0x164c, revid=0x11
>         bus=4, slot=0, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
>         lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=6
>         powerspec 2  supports D0 D3  current D0
>         MSI supports 1 message, 64 bit
>         map[10]: type 1, range 64, base f8000000, size 25, enabled
> pcib14: (null) requested memory range 0xf8000000-0xf9ffffff: good
> pcib13: (null) requested memory range 0xf8000000-0xf9ffffff: good
> pcib13: matched entry for 3.0.INTA
> pcib13: slot 0 INTA hardwired to IRQ 16
> pcib14: slot 0 INTA is routed to irq 16
> bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf8000000-0xf9ffffff irq 16 at
> device 0.0 on pci4
> bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
> bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
> miibus1: <MII bus> on bce1
> brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> bce1: bpf attached
> bce1: Ethernet address: 00:15:c5:e6:b6:a9
> bce1: [MPSAFE]
> pci0: <serial bus, USB> at device 29.0 (no driver attached)
> pci0: <serial bus, USB> at device 29.1 (no driver attached)
> pci0: <serial bus, USB> at device 29.2 (no driver attached)
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib15: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pcib15:   secondary bus     15
> pcib15:   subordinate bus   15
> pcib15:   I/O decode        0xd000-0xdfff
> pcib15:   memory decode     0xfc100000-0xfc2fffff
> pcib15:   prefetched decode 0xd8000000-0xdfffffff
> pcib15:   Subtractively decoded bridge.
> pci15: <ACPI PCI bus> on pcib15
> pci15: physical bus=15
> found-> vendor=0x1002, dev=0x515e, revid=0x02
>         bus=15, slot=13, func=0
>         class=03-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
>         lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=5
>         powerspec 2  supports D0 D1 D2 D3  current D0
>         map[10]: type 3, range 32, base d8000000, size 27, enabled
> pcib15: (null) requested memory range 0xd8000000-0xdfffffff: good
>         map[14]: type 4, range 32, base 0000dc00, size  8, enabled
> pcib15: (null) requested I/O range 0xdc00-0xdcff: in range
>         map[18]: type 1, range 32, base fc1f0000, size 16, enabled
> pcib15: (null) requested memory range 0xfc1f0000-0xfc1fffff: good
> pcib15: matched entry for 15.13.INTA
> pcib15: slot 13 INTA hardwired to IRQ 19
> vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem
> 0xd8000000-0xdfffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on p
> ci15
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device
> 31.1 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
> ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
> ata0: [MPSAFE]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
> ata1: [MPSAFE]
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size
> Timecounter "HPET" frequency 14318180 Hz quality -200
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> sio0: irq maps: 0x4c61 0x4c71 0x4c61 0x4c61
> sio0: irq maps: 0x4c61 0x4c71 0x4c60 0x4c61
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A, console
> ioapic0: routing intpin 4 (ISA IRQ 4) to vector 52
> sio0: [FAST]
> sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61
> sio1: irq maps: 0x4c61 0x4c69 0x4c61 0x4c61
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ioapic0: routing intpin 3 (ISA IRQ 3) to vector 53
> sio1: [FAST]
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> fdc: fdc0 already exists; skipping it
> sio: sio0 already exists; skipping it
> sio: sio1 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> ahc_isa_probe 0: ioport 0xc00 alloc failed
> ahc_isa_probe 12: ioport 0xcc00 alloc failed
> ahc_isa_probe 13: ioport 0xdc00 alloc failed
> ahc_isa_probe 14: ioport 0xec00 alloc failed
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xcf000-0xd07ff,0xec000-0xeffff
> pnpid ORM0000 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0065
> atkbd: keyboard ID 0x41ab (2)
> kbdc: RESET_KBD return code:00fa
> kbdc: RESET_KBD status:00aa
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0065
> kbdc: TEST_AUX_PORT status:ffffffff
> kbdc: DIAGNOSE status:0055
> kbdc: TEST_KBD_PORT status:0055
> psm: keyboard port failed.
> psm0: the aux port is not functioning (-1).
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> le0: not probed (disabled)
> ppc0 failed to probe at irq 7 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> Device configuration finished.
> Reducing kern.maxvnodes 134345 -> 100000
> procfs registered
> lapic: Divisor 2, Frequency 166433579 hz
> Timecounter "TSC" frequency 2995804296 Hz quality -100
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> acd0: <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> CDRW drive at ata0 as master
> acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
> acd0: Writes: CDR, CDRW, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> SMP: AP CPU #1 Launched!
> cpu1 AP:
>      ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>   timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
> SMP: AP CPU #3 Launched!
> cpu3 AP:
>      ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>   timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
> SMP: AP CPU #2 Launched!
> cpu2 AP:
>      ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>   timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
> INTR: Assigning IRQ 1 to local APIC 0
> ioapic0: Assigning ISA IRQ 1 to local APIC 0
> INTR: Assigning IRQ 3 to local APIC 1
> ioapic0: Assigning ISA IRQ 3 to local APIC 1
> INTR: Assigning IRQ 4 to local APIC 6
> ioapic0: Assigning ISA IRQ 4 to local APIC 6
> INTR: Assigning IRQ 9 to local APIC 7
> ioapic0: Assigning ISA IRQ 9 to local APIC 7
> INTR: Assigning IRQ 14 to local APIC 0
> ioapic0: Assigning ISA IRQ 14 to local APIC 0
> INTR: Assigning IRQ 15 to local APIC 1
> ioapic0: Assigning ISA IRQ 15 to local APIC 1
> INTR: Assigning IRQ 16 to local APIC 6
> ioapic0: Assigning PCI IRQ 16 to local APIC 6
> pmc: Unknown Intel CPU.
> module_register_init: MOD_LOAD (hwpmc, 0xc0535401, 0xc0738954) error 78
> Trying to mount root from nfs:
> bNcFeS1 :R OlOiTn:k  6s4t.a8t1e. 1c8h9a.n7g1e:d/ ttfot pDbOoWoNt
> 
> bce1: link state changed to UP
> start_init: trying /sbin/init
> bce0: link state changed to DOWN
> Interface bce1 IP-Address 64.81.189.84 Broadcast 64.81.189.95 
> Loading configuration files.
> No suitable dump device was found.
> Entropy harvesting:.
> Starting file system checks:
> Mounting local file systems:.
> Setting hostname: f3.polstra.com.
> kern.module_path: /boot/kernel;/boot/modules -> /;/boot/kernel;/boot/modules
> net.inet.icmp.bmcastecho: 0 -> 1
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         inet6 ::1 prefixlen 128 
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
>         inet 127.0.0.1 netmask 0xff000000 
> Starting devd.
> net.inet6.ip6.accept_rtadv: 0 -> 1
> hw.acpi.cpu.cx_lowest: C1 -> C1
> Generating host.conf.
> Additional routing options: tcp extensions=NO.
> add net ::ffff:0.0.0.0: gateway ::1
> add net ::0.0.0.0: gateway ::1
> net.inet6.ip6.forwarding: 0 -> 0
> net.inet6.ip6.accept_rtadv: 1 -> 1
> add net fe80::: gateway ::1
> add net ff02::: gateway ::1
> IPv4 mapped IPv6 address support=NO
> Mounting NFS file systems:.
> Creating and/or trimming log files:.
> Starting syslogd.
> Nov  1 20:04:31 f3 syslogd: kernel boot file is /boot/kernel/kernel
> /etc/rc: WARNING: Dump device does not exist.  Savecore not run.
> ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
> a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aoutsp
> Initial i386 ilnitialization:.a
> Additional ABI ssupport:.
> hStarting rpcbind:.
> NFS access ca che time=60
> Stairting local daemmons:.
> Configuriang syscons: blangktime screensaveer decoder found: blank_saver
> .
> Local package initialization: webctld.
> Additional TCP options:.
> Starting inetd.
> 
> Wed Nov  1 20:04:32 UTC 2006
> 
> FreeBSD/i386 (f3.polstra.com) (ttyd0)
> 
> login: 
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?454A1E47.9060200>